loop presentation powerpoint 2013

How-To Geek

How to loop a powerpoint presentation.

If you're showing off a lot of photos at a special event, set your presentation to progress at a continuous, automatic loop. Here's how.

Quick Links

Set up your slideshow to be looped, apply automatic slide transitions.

Slideshows are sometimes used to display images at events, such as weddings or trade shows. Whatever the occasion might be, you’ll want to loop your PowerPoint presentation so your guests aren’t staring at a blank screen. Here’s how it’s done.

First, open your PowerPoint presentation in which you would like to loop. Once open, navigate to the “Set Up” group of the “Slide Show” tab and then select the “Set Up Slide Show” button.

The “Set Up Show” window will appear. In the “Show options” group, check the box next to “Loop Continuously until Esc.” Once selected, click “OK” in the bottom-right corner of the window.

Now, when you play your slideshow, it will end only when you press the “Esc” key instead of when you've finished the last slide.

Related: How to Make YouTube Videos Loop Continuously

One caveat: With the way we currently have it set up, the slideshow will proceed only when someone clicks the mouse button. That’s fine if there will be a speaker present at all times. Otherwise, you’ll need to set up automatic slide transitions.

Head back to the “Set Up Show” window by selecting “Set Up Slide Show” in the “Set Up” group of the “Slide Show” tab.

There are a couple of options you need to select, but one important note is that you must first select “Using Timings, If Present” under the “Advance Slides” group.

The next option we select will lock a few things in place (which is why you need to select “Using Timings, If Present” first).

Under the “Show Type” group, select “Browsed at a Kiosk (Full Screen)." The “Loop Continuously until Esc” option will be enabled automatically if you haven’t already turned it on, and the option you’ve selected under “Advance Slides” will remain unchanged.

Select “OK” when ready to proceed.

Without the “Browsed at a Kiosk” option enabled, the automatic slide progressions would be disabled if someone were to press the Back key. With it enabled, the Forward and Back keys are locked, allowing the slideshow to automatically progress unattended without fear of someone breaking it.

Now it’s time to set the timings of the slides. Head over to the “Transitions” tab. In the “Timing” group, check the box next to “After” and set the timing at which you’d like each slide to progress. Note that it doesn’t matter if the box next to “On Mouse Click” is checked or not---it won’t work.

After that, select the “Apply to All” option in the same group.

Now, when you play your slideshow, it will continuously loop without interruption. To exit the slideshow, press the “Esc” button.

How to Loop a PowerPoint Presentation

Just like an animated GIF or video clip, you can loop a slideshow in Microsoft PowerPoint. This is ideal if you set the presentation to automatically play because it starts at the beginning each time it ends to create an infinite loop.

Here’s how to loop a PowerPoint presentation on Windows and Mac. Currently, PowerPoint on the web doesn’t offer a Loop feature.

Set the Timing to Advance the Slides

Before you set your PowerPoint presentation to loop, you may want to adjust the timing to advance through the slides. You can use the same time for each slide or display particular slides for a longer amount of time.

• Open your presentation in PowerPoint on Windows or Mac and go to the Transitions tab.
• In the Timing section of the ribbon, check the box for After and enter the time in seconds to the right. You can also use the arrows to move the time up or down in small increments.

• To set different times for slides, select the next slide and use the above step to choose the After timing. Continue this process for the remaining slides.
• To set the same timing for all slides in the presentation, select Apply To All in the Timing section.

• If you only want continuous play to advance the slides, you can uncheck the box directly above for On Mouse Click . However, if you want the ability to advance the slides with a mouse click and after a certain amount of time, you can leave the box checked.

Once you have the timings set to advance the slides, you can turn on the Loop setting.

• Go to the Slide Show tab and select Set Up Slide Show in the Set Up section.

• Under Show type , choose an option to play your presentation.
• If you plan to present the slideshow or have an individual view the show, choose one of the first two options. Then, check the box for Loop continuously until ‘Esc’ in the section beneath.

Confirm that the Using timings, if present setting is marked under Advance Slides.

• If you want the slideshow to play automatically , choose the third option, Browsed at a kiosk . You’ll then see the Loop continuously until ‘Esc’ and Using timings, if present settings are automatically marked and disabled for changing.

• Adjust any other options per your preference and use the OK button to save the settings.

When you’re ready to begin the slideshow and let it play, check out our how-to for starting the PowerPoint presentation as well as navigating it if needed.

Just Let It Play

By looping a PowerPoint presentation, you don’t have to lift a finger to advance through the slides. You can display it at a kiosk, in a waiting room, or at a convention booth and just let it play over and over.

For more, look at how to add narration for an engaging PowerPoint presentation .

Sandy Writtenhouse is a freelance technology writer and former Project, Department, and Program Manager. She turned her education, job experience, and love of technology into a full-time writing career. With all sorts of gadgets in her home and her hands, she seeks to help others make life easier through technology. Read Sandy's Full Bio

Read More Posts:

How to Loop a PowerPoint Slide Show to Repeat Automatically

Set up a PowerPoint Presentation That Loops or Repeats Continuously

by Avantix Learning Team | Updated November 12, 2021

Applies to: Microsoft ®  PowerPoint ®  2013, 2016, 2019 and 365 (Windows)

You can set up a PowerPoint slide show to loop or repeat automatically. A looping presentation can be used at events, trade shows or even in a reception area in an office. The easiest way to set up a slide show to loop or replay continuously is to apply automatic transitions and then configure Slide Show settings.

Recommended article: 5 PowerPoint Keyboard Shortcuts to Run a Slide Show

Do you want to learn more about PowerPoint? Check out our virtual classroom or in-person PowerPoint courses >

Screenshots in this article are from PowerPoint 365 but are similar in older versions of PowerPoint.

Step 1: Apply transitions to automatically advance slides during a slide show

Transitions occur between slides when you run a slide show.

To apply transitions to automatically advance slides during a slide show:

• In Normal View or Slide Sorter View, display or select a slide.
• Click the Transitions tab in the Ribbon.
• Select a transition in the Transitions gallery (such as Fade).
• Click Effect Options and choose the desired option. Effect Options change depending on the transition you selected.
• In the Timing group, click the arrows beside Duration to set the timing you want (in seconds) for the transition. You may also type a duration.
• In the Timing group, under Advance Slides, deselect or uncheck On mouse click and beside After, select or click the up and down arrows to set the timing to transition to the next slide. You may also type a duration.
• In the Timing group, click Apply to All.

In the Transitions tab in PowerPoint, you can select the type of transition (such as Fade) as well as timing options:

Step 2: Set up a presentation to loop during a slide show

To set up a PowerPoint presentation to loop during a slide show:

• Click the Slide Show tab in the Ribbon and then click Set Up Slide Show. A dialog box appears.
• Under Show type, if you select Presented by a speaker (full screen), the speaker or those watching the slide show will have control over when they advance slides. This is the default setting for slide shows. If you select Browsed by an individual (window), those watching the slide show do NOT have control over when slides advance. If you select Browsed at kiosk (full screen), those watching the slide show do NOT have control over when slides advance and the presentation automatically loops until those watching press Escape (Esc).
• Under Show options, select Loop continuously until 'Esc'. You will be able to select this option if you selected one of the first two options under Show type.

Below is the Set Up Show dialog box with Presented by speaker selected and looping enabled:

If you want to set specific timings for slides to advance or to add narration, check out the article How to Run a PowerPoint Slide Show Automatically (Set Up a Self-Running Presentation) . If you have audio or video in the presentation, you'll need to set the media to play automatically (on the Playback tab in the Ribbon) and animations will also need to be set to run automatically.

Subscribe to get more articles like this one

Did you find this article helpful? If you would like to receive new articles, JOIN our email list.

More resources

How to Embed a YouTube Video in PowerPoint

How to Hide and Unhide Slides in PowerPoint (with Shortcuts)

How to Insert Video in PowerPoint (from a File on Your PC or a Shared Drive)

PowerPoint Keyboard Shortcuts to Play and Control Video During a Slide Show

How to Add Animation in PowerPoint (Animate Images, Text and Other Objects)

Related courses

Microsoft PowerPoint: Intermediate / Advanced

Microsoft PowerPoint: Design for Non-Designers

Microsoft PowerPoint: Animations Bootcamp

Microsoft Excel: Intermediate / Advanced

VIEW MORE COURSES >

Our instructor-led courses are delivered in virtual classroom format or at our downtown Toronto location at 18 King Street East, Suite 1400, Toronto, Ontario, Canada (some in-person classroom courses may also be delivered at an alternate downtown Toronto location). Contact us at [email protected] if you'd like to arrange custom instructor-led virtual classroom or onsite training on a date that's convenient for you.

Copyright 2024 Avantix ® Learning

You may also like

How to Insert or Type E with an Accent Mark in PowerPoint (È, É, Ê, Ë, è, é, ê, or ë)

You can insert or type e with an accent mark in PowerPoint using built-in tools or keyboard shortcuts (including Alt code shortcuts). The letter e can be inserted with an accent in both upper or lower case in text boxes or placeholders on slides, the slide master or layouts. The following are common accents in upper or lower case – È, É, Ê, Ë, è, é, ê, or ë.

How to Fade a Picture or Part of a Picture in PowerPoint (Using a Gradient)

You can fade a picture in PowerPoint by drawing a rectangle shape on top of the picture and then filling the rectangle with a gradient from opaque to transparent. This technique is often used to fade an image into the background of a slide. Since the rectangle is placed on top of the image and then text may be placed on top of the rectangle, you may need to reorder the objects.

How to Lock an Image, Shape or Other Object in PowerPoint

You can now lock an image, shape or other object in PowerPoint. Objects can be locked in Normal View or Slide Master View. Only PowerPoint 365 users can lock objects to prevent moving and resizing. This is helpful if you want to select and move other objects on the slide or prevent others from moving or resizing an object. You can lock items using the context menu or the Selection Pane.

Microsoft, the Microsoft logo, Microsoft Office and related Microsoft applications and logos are registered trademarks of Microsoft Corporation in Canada, US and other countries. All other trademarks are the property of the registered owners.

Avantix Learning |18 King Street East, Suite 1400, Toronto, Ontario, Canada M5C 1C4 | Contact us at [email protected]

Our Courses

Avantix Learning courses are offered online in virtual classroom format or as in-person classroom training. Our hands-on, instructor-led courses are available both as public scheduled courses or on demand as a custom training solution.

All Avantix Learning courses include a comprehensive course manual including tips, tricks and shortcuts as well as sample and exercise files.

VIEW COURSES  >

Contact us at  [email protected]  for more information about any of our courses or to arrange custom training.

Privacy Overview

Pin it on pinterest.

• Print Friendly

• Start the presentation and see your notes in Presenter view Article
• Add speaker notes to your slides Article
• Rehearse and time the delivery of a presentation Article
• Record a slide show with narration and slide timings Article
• Print your PowerPoint slides, handouts, or notes Article
• Create a self-running presentation Article

Create a self-running presentation

You can use a self-running presentation to run unattended in a booth or kiosk at a trade show or convention, or you can save it as a video and send it to a client.

On the Slide Show tab, select  Set Up Slide Show .

Under Show type , pick one of the following:

Presented by a speaker (full screen)  Allows the people watching your slide show to have control over when they advance the slides.

Browsed by an individual (window)  Presents your slide show in a window, where control over advancing the slides is not available to the people watching.

Browsed at a kiosk (full screen)  Loops your slide show until the person watching presses Esc.

Rehearse and record slide timings

When you choose the following show types: Presented by a speaker (full screen) or  Browsed at a kiosk (full screen) , you’ll want to rehearse and record timings for effects and slides.

On the Slide Show tab, select  Rehearse Timings .

Note:  The presentation timer begins immediately when you click Rehearse Timings .

The Rehearsal toolbar appears and the Slide Time box begins timing the presentation.

Figure: The Rehearsal toolbar

While timing your presentation, you can do one or more of the following on the Rehearsal toolbar:

To move to the next slide, click Next .

To temporarily stop recording the time, click Pause .

To restart recording the time after pausing, click Pause .

To set an exact length of time for a slide to appear, type the length of time in the Slide Time box.

To restart recording the time for the current slide, click Repeat .

After you set the time for the last slide, a message box displays the total time for the presentation and prompts you to do one of the following:

To keep the recorded slide timings, click Yes .

To discard the recorded slide timings, click No .

Slide Sorter view appears and displays the time of each slide in your presentation.

Add narration or sound

To record a narration, your computer requires a sound card and a microphone, and a microphone connector if the microphone is not a part of your computer.

On the Slide Show tab, in the Set Up group, click the arrow on the Record Slide Show button.

Select one of the following:

Start Recording from Beginning

Start Recording from Current Slide

In the Record Slide Show dialog box, select the Narrations and laser pointer check box, and if appropriate, select or deselect the Slide and animation timings check box.

Click Start Recording .

To pause the narration, in the Recording shortcut menu in Slide Show view, click Pause . And to resume your narration, click Resume Recording .

To end your slide show recording, right-click the slide, and then click End Show .

The recorded slide show timings are automatically saved and the slide show appears in Slide Sorter view with timings beneath each slide.

You can record a narration before you run a presentation, or you can record it during the presentation and include audience comments. If you do not want narration throughout your entire presentation, you can record separate sounds or comments on selected slides or objects. For more details, see Record a slide show with narration and slide timings .

Browsed by an individual (window)  Presents your slide show in a window, where control over advancing the slides is available to the people watching.

Browsed at a kiosk (full screen)  Loops your slide show until the person watching presses Esc. (Selecting this option automatically selects the Loop continuously until 'Esc'  check box and causes your slide show to run in a loop.)

A  Rehearsal toolbar appears, and the Slide Time box begins timing the presentation. The toolbar includes a timer, a pause/play button, and Repeat button

To restart recording the time after pausing, click Play .

On the view tab, you can then switch to Slide Sorter view to see the time allotted for each slide in your presentation.

Set up slide transitions

If you want a slide show to run automatically at a kiosk, you can control when and how the slides advance. To do this, you can apply the same transition to all slides in the presentation and set the transition to automatically advance after a certain time interval.

On the Transitions tab, click the transition that you want.

Do the following on the Transitions tab:

To set the amount of time that each slide is displayed, select After and enter the number of seconds you want.

To set the duration of each transition between slides, enter the amount of time in the Duration box.

Click Apply to All .

Export a presentation to video

You can export a presentation as a movie file. See Save a presentation as a movie file for more details.

Need more help?

Want more options.

Explore subscription benefits, browse training courses, learn how to secure your device, and more.

Microsoft 365 subscription benefits

Microsoft 365 training

Microsoft security

Accessibility center

Communities help you ask and answer questions, give feedback, and hear from experts with rich knowledge.

Ask the Microsoft Community

Microsoft Tech Community

Windows Insiders

Microsoft 365 Insiders

Was this information helpful?

Thank you for your feedback.

How to loop a PowerPoint slideshow so that it automatically starts over as soon as it ends

• To loop a PowerPoint slideshow, you'll need to enable looping in the "Set Up Slide Show" menu.
• Once you set your PowerPoint to loop, it'll start over from the beginning automatically after playing the last slide.
• Visit Business Insider's Tech Reference library for more stories .

If you've designed a Microsoft PowerPoint presentation that's meant to be viewed repeatedly, such as on a kiosk or in a museum installation, you can adjust the settings in PowerPoint so that your slideshow "loops" instead of ending after one viewing.

Getting a PowerPoint to loop is easy. Read on to find out how, using PowerPoint for both Mac and PC.

Check out the products mentioned in this article:

Microsoft office (from $149.99 at best buy), apple macbook pro (from $1,299.00 at apple), acer chromebook 15 (from $179.99 at walmart), how to loop a powerpoint presentation.

1. Open the Microsoft PowerPoint presentation that you want to loop.

2. With your PowerPoint presentation open, click on the "Slide Show" tab, then click on "Set Up Slide Show." 

3. In the pop-up window that appears, click on the box next to "Loop continuously until 'Esc'" so that a small checkmark appears inside the box. Feel free to adjust any other settings in this menu as well. Click "OK" when you're finished.

4. To test whether your PowerPoint can loop successfully, click on the "From Beginning" or "Play From Start" button in the Slide Show tab. Click through the slideshow until you reach the end. When your PowerPoint reaches its final slide, it should start over from the beginning automatically. When you're confident that looping is enabled, and you're ready to close the slide show, press the Esc key.

Related coverage from  Tech Reference :

How to add a border to slides in powerpoint, and give your slideshow a sleek design, how to embed a youtube video into your microsoft powerpoint presentations using a mac or pc, how to convert google slides to a powerpoint presentation in 4 easy steps, how to create a custom powerpoint template to use or share with others, how to copy or duplicate a powerpoint slide and put it anywhere in your slideshow.

Insider Inc. receives a commission when you buy through our links.

Watch: We compared the $1,200 MacBook Air with the $500 Surface Go, and the results were a mess

• Main content

Home Blog PowerPoint Tutorials How to Loop a PowerPoint

How to Loop a PowerPoint

When a PowerPoint slideshow ends, the screen turns blank after the last slide. However, you can opt to restart the presentation from the first slide by running the slide deck in loop. You might want to loop a slide if you have created a PowerPoint slideshow that needs to run on a screen in loop, such as a self-running slideshow for a kiosk, a PowerPoint template indicating a break at an event, or when you need to go back to one or more of the previous slides from the start for a quick review of the presentation.

How to Make PowerPoint Loop

To loop PowerPoint, go to Slide Show -> Setup Show .

From the dialog box that appears, select Loop continuously until ‘Esc’ to enable looping your slides. By default, all slides are looped in a sequence.

How to Loop PowerPoint from Selected Slides

To loop specific slides, go to Slide Show -> Setup Show , enable loop, and select the slides to run in a loop via Show Slides .

How to Loop PowerPoint Slides Manually and Automatically

You might want to create a slideshow from break or countdown-themed PowerPoint templates or Google Slides templates to indicate a break during an event.

You can select the time each slide remains on screen via the Transitions tab. The Timings menu provides the option to select the duration for each slide and whether you intend the slides to move automatically or on mouse-click.

To loop PowerPoint slides manually or automatically, go to Slide Show -> Setup Show , enable the loop option, and go to Advance slides . Select Manually for moving slides on mouse click, arrow keys, or PowerPoint remote. Alternatively, select Use timings .

Final Words

Whether you need to loop a PowerPoint presentation manually or automatically for an event or to create a self-running slideshow that loops PPT, you can use the instructions mentioned above to customize the settings for your slide deck according to need.

Like this article? Please share

Microsoft PowerPoint, PowerPoint Tools Filed under PowerPoint Tutorials

Related Articles

Filed under PowerPoint Tutorials • May 14th, 2024

How to Create a Roadmap in PowerPoint

Learn how to create effective roadmap presentations in PowerPoint with this step-by-step guide and recommended templates.

Filed under PowerPoint Tutorials • May 10th, 2024

How to Copy a Slide in PowerPoint

Optimize your slide deck creation process by learning how to copy a slide in PowerPoint. Detailed instructions with screenshots here.

Filed under Google Slides Tutorials , PowerPoint Tutorials • April 17th, 2024

Google Slides vs. PowerPoint: A Detailed Comparison

Contrast and pick with presentation software suits your best. Check our guide on how the Google Slides vs. PowerPoint eternal debate.

Leave a Reply

• Stream Your Favorite Sports
• Where to Watch WNBA Games

Loop a PowerPoint Slide Show

• Brock University

What to Know

• In PowerPoint, go to Slide Show > Set Up Slide Show > Browsed at a Kiosk (Full Screen ) > OK .
• Set the time each slide appears on the screen by selecting Slide Show > Rehearse Timings on the first slide.
• Use Next to move to the next slide and Pause to pause recording, or type a length of time in the Slide Time box.

This article explains how to loop a PowerPoint slideshow in PowerPoint 2019, PowerPoint 2016, PowerPoint 2013, PowerPoint 2010, PowerPoint for Microsoft 365, PowerPoint 2019 for Mac, PowerPoint 2016 for Mac, and PowerPoint for Mac 2011.

How to Create a Self-Running PowerPoint Slideshow

PowerPoint slideshows are not always used by a live presenter. Slideshows set to loop continuously can run unattended in a booth or kiosk. You can even save a slideshow as a video to share.

To create a continuously looping presentation, you need to set it up and record slide timings.

To run the slideshow unattended, set timings for slide transitions and animations to run automatically.

How to Set Up the Presentation

Open the PowerPoint presentation you want to loop continuously.

Go to Slide Show .

Select Set Up Slide Show . The Set Up Show dialog box opens.

Select Browsed at a Kiosk (Full Screen) . This enables the presentation to loop continuously until the viewer presses Esc .

Select OK .

How to Rehearse and Record Timings

To ensure that your automated presentation is the right length, record timings to set the amount of time each slide appears on the screen.

PowerPoint for Mac does not have the rehearsal option. Instead, go to Transitions , choose the transition you want to use, set the duration you want, and select Apply to All .

Go to the first slide of the presentation.

Select Rehearse Timings . The slideshow starts and records the time spent on the slide. The time appears in the Slide Time box on the Recording toolbar.

Select Next on the Recording toolbar when you want to move to the next slide.

Select Pause any time you want to pause or resume recording.

Type a length of time in the Slide Time box if you want to display a slide for a specific amount of time.

Select Repeat if you want to restart the recording time for the current slide only.

Select Close when you're done recording.

You'll be asked if you want to save the new slide timings. Select Yes to save the slide timings at the end of the presentation.

If you have a microphone (built-in or external), record a voiceover on your PowerPoint presentation that plays as the slideshow loops continuously.

Get the Latest Tech News Delivered Every Day

• How to Make a Slideshow on PowerPoint
• Add Hyperlinks to PowerPoint Presentations
• Tips for Memorial PowerPoint Presentations
• Create a Wedding PowerPoint Presentation
• Adding Sounds, Music or Narration to PowerPoint Slide Shows
• How to Add Music to PowerPoint
• How to Do a Voiceover on PowerPoint
• How to Use Speaker Notes in PowerPoint
• How to Add Audio to PowerPoint
• Resuming Your PowerPoint Show After a Pause
• How to Change a Black-and-White Picture to Color in PowerPoint
• Add, Delete or Change the Order of PowerPoint Slides
• Make the Most of PowerPoint's Slide Transition Options
• How to Print PowerPoint Slides
• Different Ways to View Slides in PowerPoint
• How to Add Page Numbers in PowerPoint

How to Make Your Presentations Loop in PowerPoint

You might want to make your presentations loop in PowerPoint for several reasons. Regardless of why, this guide will help.

Microsoft PowerPoint is already a useful productivity tool to deliver slideshows and presentations, but it's even more versatile than you may realize. PowerPoint offers the functionality for your presentations to loop so that the slideshow restarts right after it ends. Read on to find out how to enable this in your project and why such a feature can be immensely useful in a variety of situations.

How to Loop Your Presentations in PowerPoint

As you make your presentation the way you would like for it to be seen, setting your slideshow up to loop is relatively easy. It mainly involves changing a single setting within PowerPoint.

1. Within the Ribbon at the top of the window, click Slide Show . This will take you to a menu of options for displaying and presenting your slide show.

2. Click Set Up Slide Show in the middle Set Up section. This button will open up a pop-up window of detailed, advanced settings for your presentation.

3. In the Set Up Show window, click Loop continuously until 'Esc' in the Show options section.

4. Click OK to apply the change.

5. Preview the presentation using the From Beginning or From Current Slide buttons in the Ribbon to see that the looping works.

As you might notice when you preview the slide show, enabling the setting is only half the battle. While the presentation does return to the first slide after displaying the last one, the slides don't progress on their own. If you want your slides to loop automatically, you'll need to set up transitions between each slide.

How to Automatically Loop Your PowerPoint Slides

1. Select the slide you want to apply the transition to if you haven't already.

2. Click Transitions within the Ribbon. This opens up a variety of options for adding animations when changing from one slide to the next.

3. Choose one of the transitions in the Transition to This Slide section to use with this slide. There are a variety of transition options available, from the subtle to the flashy.

While you can play with each transition to your heart's content, it's not necessarily required; you can stick with the default None option or a simple Fade if you'd like.

4. Navigate to the Timing section on the right-hand side of the Ribbon. In order to automate your loop, you'll need to specify when each slide moves to the next one.

5. Under the Advance Slide heading, click the After: checkbox to enable it.

6. Set a time (in minutes or seconds) by entering one in the text box (currently reading "00:00.00") or the arrow buttons nearby.

7. Repeat this process for the other slides you have. Alternatively, you can click Apply To All to set the current slide's transition settings across every slide in the presentation.

8. When you've applied the transitions you want, you can preview the presentation again using the From Beginning or From Current Slide buttons in the Slide Show tab of the Ribbon.

In the preview, you'll see that the slides now transition automatically, and the loop now works without any further interaction. When you need to leave the presentation, press the Esc (escape) key to return to the normal PowerPoint window.

Why Would You Want to Loop a PowerPoint Presentation?

There are a number of reasons why you'd want to run a PowerPoint presentation in a loop, and thus multiple ways this functionality is useful.

You can create a continuous carousel of photos for gatherings with family and friends or a relaxing slideshow of beaches at the end of a stressful day. You can use it to display important information, like rules or schedules, at conferences or conventions.

The integration with the regular transition timings also allows for specialized use cases where you may need to have certain slides displayed longer than others. For example, it can be used to show menu pricing at a kiosk or on a food truck or to offer some entertainment to people waiting in a long line.

Keep Your PowerPoint Presentation Skills in the Loop

Learning how to loop PowerPoint presentations is just one of the many lesser-noticed features of the widely-used tool that can take your slideshows to a new level.

Functionality like this helps keep PowerPoint a versatile, popular program built for a variety of presenting needs. Now, it's time to put these features to work for you.

< Go back to Login

Forgot Password

Please enter your registered email ID. You will receive an email message with instructions on how to reset your password.

How To Loop A PowerPoint Slideshow? Detailed Guide

Microsoft PowerPoint is a popular application for creating and delivering presentations. PowerPoint has numerous options for adding flair and taking your presentations a notch higher, such as the ability to incorporate YouTube videos, GIFs, etc. If you loop your PowerPoint, every slide will display for a predetermined duration. After the presentation, it will automatically resume from the beginning.

But the question is, can you use the looping function effectively? When used correctly, this feature eliminates the need for presenters to click a mouse or computer key to transition between slides. This feature is easy to set up and customize.

Today’s guide will teach us how to loop a PowerPoint slideshow and various tips and tricks for effective looping.

Why You Need to Loop Your Slideshow in PowerPoint?

Before learning how to loop a PowerPoint slideshow, let’s see under what scenarios one needs to loop their slideshow:

One helpful tool in PowerPoint that helps to guarantee a smooth and continuous presentation experience is the ability to loop your slideshow. The constant playback draws and maintains audience attention whether you present information in automated presentations, build interactive kiosks, or show information in exhibitions. Looping makes it possible to communicate information effectively and reinforce essential points for audience members who might join the presentation at different times. 

How to Make a PowerPoint Loop?

You can learn how to make a PowerPoint loop through the instructions below. You can use the loop for various events, such as trade exhibitions, information displays, or kiosks.

• Open the PowerPoint presentation that you wish to loop first.
• Go to the Slide Show Tab: The PowerPoint window has several tabs at the top. To access choices relating to presenting your slides, select the “Slide Show” tab.
• Access Setup Show: Several commands and choices are under the “Slide Show” tab. Search for the “Set Up Slide Show” button or menu item in the group labeled “Start Slide Show.” Click on it.
• Display Type: Select “Presented by a speaker (full screen).”
• Preview slides: If you want the slides to play automatically, select “Manually” or enter the desired duration for each slide’s PowerPoint presentation loop timing.
• Enable your presentation to loop indefinitely unless you manually end it by hitting the Escape (‘Esc’) key by enabling this option.
• Click OK: After adjusting these settings to store your options, click the “OK” button.
• Begin Your Loop: Your slides will be set to loop unless you manually stop it by pressing the ‘Esc’ key. To stop it, click “From Beginning” or “From Current Slide” under the “Slide Show” tab to begin your presentation.

How to Loop a PowerPoint SlideShow from Selected Slides

You can choose which slides you want to loop around in PowerPoint. Eliminating manual intervention and maintaining audience interaction can be achieved by carefully choosing which slides to show throughout the presentation. Follow these steps to learn how to loop a PowerPoint slideshow from selected slides: 

• Select the “Slide Show” option to start a loop for a particular set of slides. To initiate the loop, click the first slide in the thumbnail pane on the left.
• Click the final slide you wish to add to the loop while holding your keyboard’s “Shift” key. Next, select “Setup Show” and turn on the looping feature.
• Choose the “Custom Show” option and give it a name in the “Set Up Show” dialogue box. Navigate to the “Slide Show” menu and select “Custom Slide Show” to begin your looping presentation from the selected slides.

How to Set Up Auto-Loop for Continuous Playback

Now you know how to loop a slideshow in PowerPoint from selected slides, let us see how you can set up auto-loop for continuous playback: 

• Select the Slide Show tab.
• Press the Set Up Slide Show button. You’ll see an options window appear.
• Keep clicking Loop till you reach “Esc.”

Note: Under Show Type, select Presented by a speaker or Browsed by an individual if you want the speaker or individual to continue controlling the presentation and clicking between slides. Clicking “Browsed” at a kiosk checks the Loop until the “Esc” box appears continuously. Moreover, auto-looping may annoy your viewers if your presentation is very repetitive. Use it with discretion and only when it makes sense for your writing subject.

How to Loop A PowerPoint SlideShow Using 2007 Version (older versions).

Use these detailed instructions to loop your slides if you’re using an older version of Microsoft PowerPoint:

• Open your PowerPoint presentation on your 2007 Microsoft PowerPoint .
• Select the tab labeled Slide Show. Select the “Set Up Slide Show” option from the “Set Up” menu.
• Go to the “Show options” section and select “Loop continuously until ‘Esc'” from the dialogue box that appears. Click Ok.
• Select your initial slide from the “Slides” preview side panel. To select your final slide, press and hold Shift. 
• Select the tab labeled “Animations.” Turn off “On Mouse Click” and check the “Automatically After” box.
• The “After” box in the “Timing” panel has up and down arrows that you can use to change the time each slide appears. It will automatically loop back to the first slide when your slideshow reaches the last one.

How to Stop or Pause your Slideshow loop at any point.

Learning how to make a PowerPoint loop is of no use if you don’t know how to stop or pause your slideshow loop at any point: 

You can use simple keyboard commands to pause or stop your slideshow loop at any time during a PowerPoint presentation. You can manually stop the looping slideshow by hitting the “Esc” key (also known as the Escape key) on your keyboard. It gives presenters a simple and quick option to stop the continuous playback so they can answer queries, have conversations, or go to particular slides that are not playing continuously.

Advanced Techniques for Creating a Seamless Loop in PowerPoint

One of the techniques used for creating a seamless loop in PowerPoint is incorporating videos and GIFs. PowerPoint’s animations, transitions, and triggers can create seamless looping. Here is how:

• Select the video you imported and added to a slide.
• Open the “Animations” tab from the main menu.
• Choose “Play” from the animation gallery’s “Media” section after clicking the “ Add Animation ” button.
• On the right side of the screen, click the “Animation Pane” to open it.
• Right-click the “Play” button and choose “Timing” in the “Animation Pane.”
• Choose “Until End of Slide” or “Until Next Click” as the “Repeat” option in the “Timing” tab.
• Use Triggers to adjust the start and stop times of the video.

Tips and Tricks for Effective Slideshow Looping in PowerPoint

As you can see, creating a PowerPoint loop video couldn’t be easier. It only takes three easy steps to complete. Nonetheless, there are always specific tips you may apply to improve the appeal and attention-grabbingness of your videos.

1. Selecting the Right Video

The length and content of the video are the primary considerations when discussing the “right” video. Therefore, consider the duration of your video when creating a continuous loop.

Yes, longer videos can be more captivating, but they may add to the presentation’s file size and degrade performance. Shorter video clips, however, are less likely to affect performance and can loop more naturally. Regarding the video’s substance, make sure it supports the main idea of your presentation and is pertinent to the subject of your talk. The video aims to increase viewer comprehension and engagement without becoming overbearing or intrusive.

2. Compressing Video Files

Large videos can detract from the overall image of your presentation by making it excessively slow and challenging to share. Therefore, consider using a specialized video compression tool or the built-in PowerPoint compression feature to optimize your presentation by compressing the files. It doesn’t always imply that your presentation will look grainy. Still, it can cause a noticeable quality loss, so keep that in mind when creating the presentation in the first place.

3. Examining the Presentation

Make sure the video loops accurately and smoothly by testing it before you deliver your presentation. Go over the entire presentation, looking for any inconsistent or problematic playback. If you complete your testing on time, you can safely make all the required changes and retest it until the loop video functions as planned.

4. Looping Videos to Create Ambience and Background

You can also use videos that loop to set the mood for your presentation. For instance, a natural setting or a soft animation can produce an aesthetically pleasing and captivating ambiance. Nevertheless, the presentation’s general subject and the background clip are complementary rather than distracting.

To sum up, looping your PowerPoint slideshow is simple. PowerPoint’s “Set Up Slide Show options” allow you to program it to loop indefinitely for a predetermined number of times.

Use transitions carefully, arrange your slides in the correct order, and adhere to best practices while making your looping PowerPoint to give it a polished, professional appearance. Your looping slideshow can operate flawlessly at events without supervision with the correct settings.

How to Loop Slideshow In Powerpoint?

To loop a slideshow in PowerPoint, go to the “Slide Show” tab, select “Set Up Slide Show,” check “Loop continuously until ‘Esc’,” and click “OK.”

Can I loop specific slides within my PowerPoint presentation?

Yes, PowerPoint allows you to loop specific slides.

How do I stop or pause a looped slideshow in PowerPoint?

To interrupt a looped slideshow at any point, simply press the “Esc” key on your keyboard.

Can I customize the duration of each slide in a looped PowerPoint presentation?

Yes, you can control the timing of each slide by adjusting the slide transition settings, allowing for a tailored and dynamic looping experience.

Can SlideUpLift templates be used in looped presentations?

Yes, SlideUpLift provides PowerPoint templates that are compatible with looped presentations. These professionally designed templates can enhance the visual appeal of your slides, making your looped presentation more engaging and impactful.

Table Of Content

Related presentations.

Business Review PowerPoint Template

Business Case PowerPoint Deck Template

Project Status Review Deck Template

Related posts from the same category.

18 Mar, 2024 | SlideUpLift

How To Merge Two PowerPoint Presentations? Detailed Guide On How To Combine PowerPoints

If you work in sales, customer service, or as an independent consultant, you may need to utilize the same templates in many of your presentations. Of course, you don’t want

3 Feb, 2023 | SlideUpLift

How To Make A Graph In PowerPoint?

Do you need help communicating data effectively in your presentations?  Data visualization is an essential tool in today's world as it helps represent complex data sets in a simple and

8 Dec, 2022 | SlideUpLift

How To Use Transparency In PowerPoint?

PowerPoint's user-friendly design has made it a top choice among many, one of the key contributing factors to its immense popularity. Microsoft PowerPoint is one of the most used software

25 Jan, 2018 | SlideUpLift

How To Reduce PowerPoint File Size & Compress A PowerPoint

This PowerPoint tutorial explains how to reduce powerpoint file size. Business presentations contain a huge number of slides filled with graphics, audios, videos, etc. making it bulky and taxing on

19 Apr, 2023 | SlideUpLift

How To Add PowerPoint Borders To Your Presentation

Adding borders in PowerPoint is an essential aspect of presentation design as it helps to enhance the visual appeal of your slides. Customizing your presentation with borders can be a

16 Apr, 2020 | SlideUpLift

How To Broadcast A PowerPoint Presentation Online | PowerPoint Tutorial

In this blog, you will learn a powerful PowerPoint feature of how to remotely present a PowerPoint online. In today's time, countless people need to work from home and maintain

19 Aug, 2020 | SlideUpLift

How To Add Speaker Notes in PowerPoint

Are you tired of fumbling through your PowerPoint presentations, struggling to remember every single point you wanted to make? Or are you concerned you'll forget a crucial detail during a

How To Add Annotations In PowerPoint | How To Add Comments In PowerPoint

This PowerPoint tutorial explains how to add annotations in PowerPoint in simple steps. Often presentations are used in business discussions and interactive sessions. During the discussion, you might need to

26 Dec, 2022 | SlideUpLift

How to make a table in PowerPoint?

Tables are an essential element of any presentation, as they allow you to organize and present data in a clear and concise manner. Whether you're creating a business presentation, a

17 Jan, 2023 | SlideUpLift

How to Share PowerPoint Presentations on Microsoft Teams?

In today's digital age, remote work and virtual meetings have become the norm. As a result, knowing how to communicate effectively and collaborate with your team, regardless of location, is

Related Tags And Categories

Forgot Password?

Privacy Overview

Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information

Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.

How to Loop a PowerPoint Presentation?

Table of Contents

PowerPoint presentations are a go-to for clear and informative content delivery. But what if you want your presentation to run on repeat, like at a kiosk or digital sign? The good news is, that PowerPoint has a built-in feature to loop your slideshow, ensuring your message stays on display without interruption. 

This blog post will guide you through the simple steps to set your presentation on a loop, keeping your audience engaged and informed around the clock.

What is PowerPoint Looping?

Normally, in a PowerPoint presentation, you have to manually move from one slide to the next by pressing keys on the keyboard or clicking buttons on a mouse or presentation remote.

However, when you enable looping in PowerPoint, the presentation progresses automatically from one slide to the next without requiring manual input. This eliminates the need for the presenter to interact with the computer or mouse during the presentation.

With PowerPoint looping, you can also set each slide to display automatically for a specified duration, determined by you. Once the preset time elapses, the next slide seamlessly appears. Additionally, upon reaching the final slide, the slideshow automatically starts over from the beginning.

Why Do You Need to Loop Your Slideshow in PowerPoint? 

There are several reasons why you might want to loop your slideshow in PowerPoint:

• Unattended Presentations: Looping is ideal for situations where the presentation runs without a presenter. This could be at a kiosk, trade show booth, or in a waiting room. Looping ensures the information is continuously displayed for viewers to come and go as they please.
• Automated Playback: Looping allows for a hands-off presentation experience. Once started, the presentation progresses automatically, freeing you up to greet attendees or answer questions.
• Self-Paced Learning: Looping can be useful for self-paced learning environments. Viewers can revisit slides or take breaks without needing someone to control the flow.
• Continuous Engagement: Looping keeps the audience engaged with a constant stream of information. This can be beneficial for displaying menus, directions, or other ongoing updates.

Create presentation slides with AI in Seconds in Google Slides

10M+ Installs

Works with Google Slides

How to Make a PowerPoint Presentation loop?

Ready to loop your presentation? Here’s how it’s done:

Step 1:  Open your PowerPoint and head over to the “Slide Show” tab.

Step 2:  Click the button that says “Set Up Slide Show.” A new window will pop up.

Step 3:  Under “Show options,” find the magic checkbox that says “Loop continuously until ‘Esc’.” Check that box to make your presentation run on repeat.

Step 4:  Want to control how long each slide shows? Look for the option “Automatically advance slides” and check it. Then, use the up and down arrows to set the display time for each slide.

Step 5:  Once you’re happy with the settings, click “OK” to save them.

Step 6: Time to loop! Go back to the “Slide Show” tab and click “From Beginning” (or “From Start”). Your presentation will start playing and keep going until you press the “Esc” key.

How To Loop a PowerPoint SlideShow from Selected Slides?

PowerPoint lets you loop a customized selection of slides, creating engaging presentations that run unattended. This eliminates the need for manual slide changes while maintaining audience interest. Here’s how to loop specific slides:

Step 1:  Select Slides: In the Slide Sorter view, hold “Shift” and click the first and last slides you want to loop.

Step 2:  Enable Looping: Go to the “Slide Show” tab and click “Set Up Show.” Check the box for “Loop continuously until ‘Esc'” and choose “Show slides” from the dropdown menu. Select “From” and enter the slide number where your loop should begin.

Step 3:  Create Custom Show (Optional): For easier access, name your looped sequence as a “Custom Show” within the “Set Up Show” dialog.

Step 4:  Start Looping: Navigate back to the “Slide Show” tab and choose “Custom Slide Show” to launch your looped presentation.

Closing Thoughts

Looping your PowerPoint presentation is a simple yet powerful technique that unlocks a variety of use cases. By following these steps, you can ensure your message runs continuously, keeping your audience informed and engaged, whether it’s at a kiosk, trade show booth, waiting room, or any other scenario that demands unattended playback. 

• No design skills required
• 3 presentations/month free
• Don’t need to learn a new software

Frequently Asked Questions

My presentation has animations and transitions. will they loop as well.

Absolutely! When you loop your presentation, animations and transitions will also repeat continuously, regardless of the looping method you choose.

Does looping affect animation timing?

There’s a possibility. Looping might affect how your animations play out, especially if they have specific timings set. To avoid any hiccups, be sure to thoroughly test your looped presentation. This will ensure your animations sync smoothly with the slide transitions.

Can I loop specific slides in my PowerPoint presentation?

Yes! PowerPoint gives you the flexibility to loop a selected group of slides, creating engaging presentations that run unattended.

How do I stop or pause a looped slideshow in PowerPoint?

Need a break? Simply press the “Esc” key on your keyboard to interrupt the looped slideshow at any time.

Can I customize the duration of each slide in a looped PowerPoint presentation?

Yes, you can! PowerPoint allows you to adjust the slide transition settings for each slide. This lets you control how long each slide displays, creating a tailored and dynamic looping experience.

Save Time and Effortlessly Create Presentations with SlidesAI

How to: Effortlessly Create PowerPoint Looping Presentations

Looping presentations in PowerPoint can be a game-changer for those needing to display information continuously. It’s a straightforward process: Set up your slides, head to the ‘Slide Show’ tab, click on ‘Set Up Slide Show’, tick the ‘Loop continuously until ‘Esc” box, and voila – your presentation is set to loop.

After completing this action, your PowerPoint presentation will automatically replay from the beginning once it reaches the end. This is particularly useful for presentations displayed at kiosks, trade shows, or in waiting areas, ensuring your audience doesn’t miss any content.

Introduction

Ever been to a trade show and noticed how some booths have screens with presentations that seem to run endlessly? That’s the magic of looping presentations, a feature that’s built into PowerPoint but not always used to its fullest potential.

Having a presentation loop can serve multiple purposes. For those in marketing, it means your message is continually being broadcast without the need for manual intervention. For educators, it could mean students have more time to absorb information. And for those in the corporate world, it ensures that important data is consistently on display for stakeholders and team members to see.

Looping presentations are not only efficient but also incredibly simple to set up in PowerPoint. Knowing how to do this is a great skill to have in your back pocket. Whether you’re prepping for an exhibition, setting up a self-running informational display, or just want to make sure your audience can see your presentation in its entirety, no matter when they walk in the room – this article is for you.

PowerPoint Looping Presentations Tutorial

Before diving into the steps, it’s important to understand what we’re aiming to achieve. By the end of this tutorial, your PowerPoint presentation will be capable of running on its own, looping endlessly until manually stopped. It’s an excellent way to keep an audience engaged with your content, even if you’re not actively presenting.

Step 1: Open your PowerPoint presentation

Open the PowerPoint presentation you wish to loop.

When you have your presentation open, you’ll want to ensure that all your slides are in the correct order and that any timings, animations, or transitions are set up as you want them. This is crucial because once the presentation starts looping, these aspects will play over and over again.

Step 2: Click on the ‘Slide Show’ tab

Navigate to the ‘Slide Show’ tab located on the ribbon at the top of PowerPoint.

The ‘Slide Show’ tab is where you’ll find all the settings related to the presentation’s display. It’s your control center for how the presentation will run.

Step 3: Select ‘Set Up Slide Show’

Click on the ‘Set Up Slide Show’ button within the ‘Slide Show’ tab.

This action opens a new window with various options for running your presentation. It’s like the backstage area before a performance, where you make all the necessary tweaks.

Step 4: Choose ‘Loop continuously until ‘Esc”

In the ‘Set Up Show’ window, check the box that says ‘Loop continuously until ‘Esc”.

This is the setting that transforms your presentation from a one-time run-through to an endlessly looping display. It’s the crucial step in ensuring your content gets maximum exposure.

Step 5: Save your settings

Click ‘OK’ to save your settings and close the ‘Set Up Show’ window.

Once you’ve clicked ‘OK’, your presentation is all set to loop. You can start the slideshow to test it out and see your handiwork in action.

Continuous Display

By looping your PowerPoint presentation, you ensure that no matter when someone walks by or starts watching, they’ll be able to see the whole thing. It’s ideal for environments where you have a rotating audience, like at conferences or informational booths.

Time-Saving

Once set up, you don’t need to stick around to restart the presentation. It loops automatically, freeing you up to do other things – like interacting with your audience or managing other aspects of your event or meeting.

Professionalism

A self-running, looping presentation can make a statement about your professionalism. It shows that you’ve put thought into how your information is presented and that you’re adept at using technology to enhance your message.

Can be Ignored

When people know a presentation is looping, they might not give it their full attention, thinking they’ll catch the next round. This could mean your message isn’t hitting home as strongly as you’d like.

Technical Issues

Technology isn’t foolproof. If your PowerPoint or the device it’s running on experiences issues, your looping presentation could grind to a halt – often at the most inopportune times.

Repetitiveness

For those who are around for a while, a looping presentation can become like that one song on the radio that’s played too often – annoying. Finding the balance between informative and overkill is key.

Additional Information

PowerPoint’s looping feature might seem simple, but it can be incredibly powerful when used correctly. Think about the last time you walked past a looping video or presentation – it probably caught your eye, at least for a moment. That’s the draw of a looping display; it’s always there, always ready to catch the attention of someone new.

One tip is to ensure your presentation is designed with looping in mind. This means avoiding content that could become quickly dated or using language that implies the presentation is a one-time event. Instead, use evergreen content that will be relevant no matter how many times it’s viewed.

Another consideration is the length of your presentation. If it’s too long, viewers might not stick around for the whole loop, missing out on key information. If it’s too short, it could become annoyingly repetitive. Striking the right balance is essential.

When setting up your looping presentation, think about the context in which it will be viewed. Is it in a noisy trade show hall? Consider adding subtitles or visual cues that can be understood without sound. Is it in a quiet waiting area? Maybe a softer, less attention-grabbing approach is needed.

Remember, the goal of a PowerPoint looping presentation is to inform and engage, not to overwhelm or annoy. Keep your audience’s experience in mind, and you’ll be sure to create a looping presentation that adds value and captures interest.

• Open your PowerPoint presentation.
• Click on the ‘Slide Show’ tab.
• Select ‘Set Up Slide Show’.
• Choose ‘Loop continuously until ‘Esc”.
• Save your settings.

Frequently Asked Questions

What if my presentation has videos.

If your presentation contains videos, make sure they’re set to play automatically and check the box ‘Rewind after playing’ to ensure they loop with the rest of the slides.

Can I loop just one section of my presentation?

Yes, you can loop specific sections by using custom shows within PowerPoint. It’s a bit more complex but entirely possible.

Will looping work if I have transition timings set up?

Absolutely. Your slides will transition according to the timings you’ve set, looping back to the beginning when they reach the end.

How do I stop a looping presentation?

Simply press the ‘Esc’ key, and the presentation will stop looping and exit the slideshow view.

Can I loop a presentation on a Mac?

Yes, the steps are the same for PowerPoint on a Mac as they are for Windows.

Mastering PowerPoint looping presentations is like unlocking a new level in your presentation skills. It’s not just about making your slides look pretty; it’s about ensuring your message is always out there, always engaging, and always ready to inform. Whether you’re in the boardroom, at a booth, or in an educational setting, a well-crafted looping PowerPoint can make all the difference.

So go ahead, give it a try – your audience will thank you for it. And remember, the best presentations are those that not only deliver information but do so in a way that’s seamless and ever-present, just like the perfect loop.

Matthew Burleigh has been writing tech tutorials since 2008. His writing has appeared on dozens of different websites and been read over 50 million times.

After receiving his Bachelor’s and Master’s degrees in Computer Science he spent several years working in IT management for small businesses. However, he now works full time writing content online and creating websites.

His main writing topics include iPhones, Microsoft Office, Google Apps, Android, and Photoshop, but he has also written about many other tech topics as well.

Read his full bio here.

Share this:

Join our free newsletter.

Featured guides and deals

You may opt out at any time. Read our Privacy Policy

Related posts:

• How to Loop a Slideshow on Powerpoint 2013
• How to Set Time for Slides in Powerpoint
• How to Save Powerpoint as PDF with Notes
• Can I Convert My Powerpoint to Google Slides?
• How to Add Page Numbers in Powerpoint 2010
• How to Unhide a Slide in Powerpoint 2013
• How to Make a Powerpoint Slide Vertical in Powerpoint 2013
• How to Delete a Slide in Powerpoint 2010
• How to Hide a Slide in Powerpoint 2010
• How to Rotate a Slide in PowerPoint: A Step-by-Step Guide
• How to Loop a Powerpoint Presentation in Powerpoint 2013
• How to Insert Slides from Another Presentation in Powerpoint 2010
• How to End Powerpoint on Last Slide in Powerpoint 2010
• How to Change the Font on All Slides in Google Slides
• How to Delete Multiple Slides in Google Slides
• How to Change Line Spacing in Powerpoint for Every Slide at Once
• How to Insert Check Mark in Powerpoint for Office 365
• How to Change Hyperlink Color in Powerpoint 2010 (An Easy 5 Step Guide)
• What Are Benefits of PowerPoint? A Comprehensive Guide
• How to Embed a GIF in PowerPoint: A Step-by-Step Guide

How to Loop a Powerpoint Office 365 Slideshow

For typical Powerpoint presentations that you just show to one person, you likely aren’t concerned with what happens when the slideshow is over.

But some situations call for a slideshow to continue playing for an extended period of time.

This means that you will need to learn how to loop a Powerpoint Office 365 presentation so that it plays continuously.

How to Do a Powerpoint for Office 365 Slideshow Loop

• Open the presentation.
• Select the Slide Show tab.
• Choose Set Up Slide Show .
• Check the Loop continuously until Esc box.
• Click the top slide, hold down Shift , then click the last slide.
• Choose the Transitions tab.
• Uncheck On Mouse Click , check After , then set a duration for each slide.

Our guide continues below with more information on how to loop a Powerpoint Office 365 presentation, including pictures of these steps.

Sometimes you will create a presentation in Powerpoint that is going to be shown someplace where it will be unattended.

This could be at a trade show, in an office, or anywhere else where there is a TV or computer screen.

Constantly having to restart that slideshow yourself is often impractical, and would be tedious even if you were physically able to attend to it.

Fortunately, it’s possible to create a slideshow loop in Powerpoint so that the presentation will play continuously once it has concluded.

Our guide below will show you how to create a Powerpoint slideshow loop in Microsoft Powerpoint for Office 365.

Documents with pictures often need some adjustments before they look their best. You can find out more with our how to flip an image in Word article .

How to Make a Powerpoint Slideshow Loop (Guide with Pictures)

The steps in this article were performed in the Microsoft Powerpoint for Office 365 version of the application, but will work in most other versions of the application as well.

Note that the presentation can loop on its own, but you may need to adjust any screensaver or hibernation settings on your computer so that the screen will remain on.

Step 1: Open your slideshow in Powerpoint.

Step 2: click the slide show tab at the top of the window..

Step 3: Click the Set Up Slide Show button.

Step 4: Check the box to the left of Loop continuously until Esc , then click OK .

Step 5: Click your first slide in the column at the left side of the window, then hold down the Shift key, scroll down and click the last slide.

Step 6: Select the Transitions tab at the top of the window.

Step 7: Click the box to the left of On Mouse Click to remove the check mark, check the box to the left of After , then choose the amount of time to display each slide.

I have set my slideshow to display each slide for 5 seconds in the image above.

You can start your slideshow at any time by pressing the F5 key on your keyboard.

You can stop the slideshow by pressing the Esc key on your keyboard.

You should now know how to loop a Powerpoint Office 365 presentation so that it continuously plays on repeat until you press the Esc key on your keyboard to terminate it.

Find out how to change your slide size in Powerpoint if you need a different orientation or slide dimensions for your presentation.

Matt Jacobs has been working as an IT consultant for small businesses since receiving his Master’s degree in 2003. While he still does some consulting work, his primary focus now is on creating technology support content for SupportYourTech.com.

His work can be found on many websites and focuses on topics such as Microsoft Office, Apple devices, Android devices, Photoshop, and more.

Share this:

• Click to share on Twitter (Opens in new window)
• Click to share on Facebook (Opens in new window)

Related Posts

• How to Rotate a Powerpoint Slide Presentation
• How to Mirror Image in PPT Files (An Easy 6 Step Guide)
• How to Change Slide Size in Powerpoint 2016
• How to Do a Powerpoint Google Slides Presentation Conversion
• How to Add a Hyperlink on Google Slides
• Can You Print a Google Slide?
• How to Make Google Slides Vertical (5 Quick Steps)
• How to Save a Picture to Your Computer from Powerpoint for Office 365
• How to Stop Hiding a Slide in Google Slides
• How to Skip a Slide in Google Slides
• How to Make Columns in Word Office 365
• How to Make Text Vertical in Google Docs
• How to Set Google Docs Background Image
• Can You Download Google Slides Files?
• How to Save a Single Slide as a Picture in Google Slides
• How to Change Page Color in Word for Office 365 (An Easy 4 Step Guide)
• How to Get the Excel 365 Developer Tab in Microsoft Excel for Office Today
• How to Not Print Comments in Word (An Easy 5 Step Guide)
• How to Double Space in Word Office 365
• How to Bring an Image to the Front in Google Slides

Get Our Free Newsletter

How-to guides and tech deals

You may opt out at any time. Read our Privacy Policy

• PRO Courses Guides New Tech Help Pro Expert Videos About wikiHow Pro Upgrade Sign In
• EDIT Edit this Article
• EXPLORE Tech Help Pro About Us Random Article Quizzes Request a New Article Community Dashboard This Or That Game Popular Categories Arts and Entertainment Artwork Books Movies Computers and Electronics Computers Phone Skills Technology Hacks Health Men's Health Mental Health Women's Health Relationships Dating Love Relationship Issues Hobbies and Crafts Crafts Drawing Games Education & Communication Communication Skills Personal Development Studying Personal Care and Style Fashion Hair Care Personal Hygiene Youth Personal Care School Stuff Dating All Categories Arts and Entertainment Finance and Business Home and Garden Relationship Quizzes Cars & Other Vehicles Food and Entertaining Personal Care and Style Sports and Fitness Computers and Electronics Health Pets and Animals Travel Education & Communication Hobbies and Crafts Philosophy and Religion Work World Family Life Holidays and Traditions Relationships Youth
• Browse Articles
• Learn Something New
• Quizzes Hot
• This Or That Game
• Train Your Brain
• Explore More
• Support wikiHow
• About wikiHow
• Log in / Sign up
• Computers and Electronics
• Presentation Software
• PowerPoint Presentations

How to Loop in PowerPoint on PC or Mac

Last Updated: November 24, 2021

This article was co-authored by wikiHow Staff . Our trained team of editors and researchers validate articles for accuracy and comprehensiveness. wikiHow's Content Management Team carefully monitors the work from our editorial staff to ensure that each article is backed by trusted research and meets our high quality standards. This article has been viewed 20,956 times. Learn more...

Want to create a self-running PowerPoint presentation for your kiosk, trade-show, performance, or event? It's easy to adjust the options in PowerPoint to make your presentation play back in a continuous loop. When you turn on Slide Show Loop in PowerPoint, your presentation will start over again every time it ends, which means you won't need to be present to restart it. This wikiHow article will show you how to make your PowerPoint presentation loop indefinitely.

• If you haven't yet created your presentation, make one and save it as a file before proceeding.

• For example, to change the amount of time spent on each slide to 10 seconds, you would change the 00:00.00 text box to read 00:10.00 .

• Click File in the upper-left side of the window.
• Click Save As on the left side of the page.
• Double-click the This PC tab in the middle of the page.
• Click the "Save as type" drop-down box, then click PowerPoint Show in the drop-down menu.
• Enter a file name and select a save location.
• Click Save .

• If you're unhappy with a slide's display time, you can change the time by opening the presentation, going back to the Transitions tab, and adjusting the "After" text box.
• You can open a Show file in PowerPoint by dragging the Show file into the PowerPoint window.

• For example, to change the amount of time spent on each slide to 10 seconds, you would type 10.00 into the text box.

• Click File .
• Click Save As... .
• Click the "Format" drop-down box.
• Click PowerPoint Show (.ppsx) in the drop-down menu.

Expert Q&A

• If you use Microsoft Office 365, you can save your PowerPoint presentation as a video instead of a PowerPoint file and then loop the video using your computer's video player's "Loop" function. Thanks Helpful 0 Not Helpful 0

You Might Also Like

• ↑ https://support.office.com/en-us/article/create-a-self-running-presentation-57fc41ae-f36a-4fb5-94a3-52d5bc466037#OfficeVersion=Mac
• ↑ https://support.office.com/en-us/article/file-formats-for-saving-and-exporting-presentations-in-powerpoint-for-mac-a4b76110-697c-496f-b9c5-e318f2bd6eba

About This Article

• Send fan mail to authors

Is this article up to date?

Featured Articles

Trending Articles

Watch Articles

• Terms of Use
• Privacy Policy
• Do Not Sell or Share My Info
• Not Selling Info

wikiHow Tech Help Pro:

Level up your tech skills and stay ahead of the curve

How To Loop a PowerPoint: A Step-by-Step Guide

Microsoft PowerPoint is a well-known tool for making and delivering presentations. Do you know how to use the looping feature? This feature makes it easy for presenters to move from slide to slide without having to click a mouse or computer key. Setting up and customizing this feature is simple.

In this article, you will learn the following:

What is PowerPoint looping?

How to set up powerpoint looping, how to stop looping on powerpoint presentations.

Typically, a PowerPoint presentation will only move from one slide to the next when prompted. A presenter will have to press the arrow key on the computer keyboard, right-click on the mouse, or press the button on a hand-held presentation remote in order to move to the next slide.

When you loop a PowerPoint, you set the presentation to move from one slide to the next without being prompted. For presenters, this means that you do not need to click the arrow key on the computer or click a mouse.

PowerPoint looping allows you to display each slide automatically for a certain amount of time, which you determine. Once the slide displays for that set time, the next slide automatically displays. After the final slide of the presentation, the slideshow repeats from the beginning.

To set up looping on a PowerPoint presentation, complete the following steps:

Create your PowerPoint presentation.

In the main menu of your PowerPoint (along the top of the screen), select “Slide Show.”

Click “Slide Show” to begin customizing your presentation’s display

In the menu that pops up at the top of your screen, select “Set Up Slide Show.”

Click “Set Up Slide Show” to begin customizing your presentation’s display

In the box that appears, locate “Show options” and check the box next to “Loop continuously until ‘Esc.’”

Check the box next to “Loop continuously until ‘Esc.’”

Click “OK.”

Setting up timing between slides

Microsoft PPT will automatically set your slides to transition every two minutes, but you can easily customize how long you want each slide to display before moving to the next slide.

In the main menu, select “Transitions.”

Click “Transitions”

Select the slide that you want to customize for the display time. If you would like all of the slides to have the same transition time, select all slides instead of just one.

Select the slide for which you want to customize the display time. If you’d like all of the slides to have the same transition time, highlight all slides instead of just one.

In the “Timing” group under “Advance Slide,” check the box next to “After:.”

Under “Advance Slide,” check the box next to “After:”

In the box next to “After:,” move the arrows up and down to determine how long you’d like the slides to display.

Once you loop your slideshow, it will display on a loop while you present. To stop this looping, simply press “Esc” on your keyboard. This will end your presentation looping.

Enhancing PowerPoint with graphics

Microsoft PowerPoint is just the beginning when it comes to creating useful presentations. If you would like to enhance the visual aspects of your PowerPoint presentations, consider add-on software that will help create graphics such as timelines, Gantt charts, and more.

Disclaimer:

The steps to loop a PowerPoint were researched in November 2021, and desktop screenshots reflect the platform layout of PowerPoint on a desktop PC. Applications and layouts are liable to change; see Microsoft’s “PowerPoint help & learning” page for additional information.