How-To Geek

How to loop a powerpoint presentation.

4

Your changes have been saved

Email is sent

Email has already been sent

Please verify your email address.

You’ve reached your account maximum for followed topics.

Quick Links

Set up your slideshow to be looped, apply automatic slide transitions.

Slideshows are sometimes used to display images at events, such as weddings or trade shows. Whatever the occasion might be, you’ll want to loop your PowerPoint presentation so your guests aren’t staring at a blank screen. Here’s how it’s done.

First, open your PowerPoint presentation in which you would like to loop. Once open, navigate to the “Set Up” group of the “Slide Show” tab and then select the “Set Up Slide Show” button.

The “Set Up Show” window will appear. In the “Show options” group, check the box next to “Loop Continuously until Esc.” Once selected, click “OK” in the bottom-right corner of the window.

Now, when you play your slideshow, it will end only when you press the “Esc” key instead of when you've finished the last slide.

Related: How to Make YouTube Videos Loop Continuously

One caveat: With the way we currently have it set up, the slideshow will proceed only when someone clicks the mouse button. That’s fine if there will be a speaker present at all times. Otherwise, you’ll need to set up automatic slide transitions.

Head back to the “Set Up Show” window by selecting “Set Up Slide Show” in the “Set Up” group of the “Slide Show” tab.

There are a couple of options you need to select, but one important note is that you must first select “Using Timings, If Present” under the “Advance Slides” group.

The next option we select will lock a few things in place (which is why you need to select “Using Timings, If Present” first).

Under the “Show Type” group, select “Browsed at a Kiosk (Full Screen)." The “Loop Continuously until Esc” option will be enabled automatically if you haven’t already turned it on, and the option you’ve selected under “Advance Slides” will remain unchanged.

Select “OK” when ready to proceed.

Without the “Browsed at a Kiosk” option enabled, the automatic slide progressions would be disabled if someone were to press the Back key. With it enabled, the Forward and Back keys are locked, allowing the slideshow to automatically progress unattended without fear of someone breaking it.

Now it’s time to set the timings of the slides. Head over to the “Transitions” tab. In the “Timing” group, check the box next to “After” and set the timing at which you’d like each slide to progress. Note that it doesn’t matter if the box next to “On Mouse Click” is checked or not---it won’t work.

After that, select the “Apply to All” option in the same group.

Now, when you play your slideshow, it will continuously loop without interruption. To exit the slideshow, press the “Esc” button.

  • Microsoft Office

Avantix Learning

How to Loop a PowerPoint Slide Show to Repeat Automatically

Loop a PowerPoint slide show to replay automatically represented by two circular arrows on top of a board room.

Set up a PowerPoint Presentation That Loops or Repeats Continuously

by Avantix Learning Team | Updated November 12, 2021

Applies to: Microsoft ®  PowerPoint ®  2013, 2016, 2019 and 365 (Windows)

You can set up a PowerPoint slide show to loop or repeat automatically. A looping presentation can be used at events, trade shows or even in a reception area in an office. The easiest way to set up a slide show to loop or replay continuously is to apply automatic transitions and then configure Slide Show settings.

Recommended article: 5 PowerPoint Keyboard Shortcuts to Run a Slide Show

Do you want to learn more about PowerPoint? Check out our virtual classroom or in-person PowerPoint courses >

Screenshots in this article are from PowerPoint 365 but are similar in older versions of PowerPoint.

Step 1: Apply transitions to automatically advance slides during a slide show

Transitions occur between slides when you run a slide show.

To apply transitions to automatically advance slides during a slide show:

  • In Normal View or Slide Sorter View, display or select a slide.
  • Click the Transitions tab in the Ribbon.
  • Select a transition in the Transitions gallery (such as Fade).
  • Click Effect Options and choose the desired option. Effect Options change depending on the transition you selected.
  • In the Timing group, click the arrows beside Duration to set the timing you want (in seconds) for the transition. You may also type a duration.
  • In the Timing group, under Advance Slides, deselect or uncheck On mouse click and beside After, select or click the up and down arrows to set the timing to transition to the next slide. You may also type a duration.
  • In the Timing group, click Apply to All.

In the Transitions tab in PowerPoint, you can select the type of transition (such as Fade) as well as timing options:

Transitions tab in the Ribbon in PowerPoint to apply transitions and timings.

Step 2: Set up a presentation to loop during a slide show

To set up a PowerPoint presentation to loop during a slide show:

  • Click the Slide Show tab in the Ribbon and then click Set Up Slide Show. A dialog box appears.
  • Under Show type, if you select Presented by a speaker (full screen), the speaker or those watching the slide show will have control over when they advance slides. This is the default setting for slide shows. If you select Browsed by an individual (window), those watching the slide show do NOT have control over when slides advance. If you select Browsed at kiosk (full screen), those watching the slide show do NOT have control over when slides advance and the presentation automatically loops until those watching press Escape (Esc).
  • Under Show options, select Loop continuously until 'Esc'. You will be able to select this option if you selected one of the first two options under Show type.

Below is the Set Up Show dialog box with Presented by speaker selected and looping enabled:

PowerPoint Slide Show dialog box to set up looping in a presentation.

If you want to set specific timings for slides to advance or to add narration, check out the article How to Run a PowerPoint Slide Show Automatically (Set Up a Self-Running Presentation) . If you have audio or video in the presentation, you'll need to set the media to play automatically (on the Playback tab in the Ribbon) and animations will also need to be set to run automatically.

Subscribe to get more articles like this one

Did you find this article helpful? If you would like to receive new articles, JOIN our email list.

More resources

How to Embed a YouTube Video in PowerPoint

How to Hide and Unhide Slides in PowerPoint (with Shortcuts)

How to Insert Video in PowerPoint (from a File on Your PC or a Shared Drive)

PowerPoint Keyboard Shortcuts to Play and Control Video During a Slide Show

How to Add Animation in PowerPoint (Animate Images, Text and Other Objects)

Related courses

Microsoft PowerPoint: Intermediate / Advanced

Microsoft PowerPoint: Design for Non-Designers

Microsoft PowerPoint: Animations Bootcamp

Microsoft Excel: Intermediate / Advanced

VIEW MORE COURSES >

Our instructor-led courses are delivered in virtual classroom format or at our downtown Toronto location at 18 King Street East, Suite 1400, Toronto, Ontario, Canada (some in-person classroom courses may also be delivered at an alternate downtown Toronto location). Contact us at [email protected] if you'd like to arrange custom instructor-led virtual classroom or onsite training on a date that's convenient for you.

Copyright 2024 Avantix ® Learning

You may also like

How to Insert or Type the Copyright Symbol in PowerPoint (4 Ways with Shortcuts)

How to Insert or Type the Copyright Symbol in PowerPoint (4 Ways with Shortcuts)

You can insert or type the copyright symbol (©) in PowerPoint using the Insert Symbol command or by using keyboard shortcuts. In this article, we'll review 4 ways to insert the copyright symbol in PowerPoint. You can insert the copyright symbol in Normal View or Slide Master View.

How to Insert or Type U with an Accent Mark in PowerPoint (Ù, Ú, Û, Ü, ù, ú, û, or ü)

How to Insert or Type U with an Accent Mark in PowerPoint (Ù, Ú, Û, Ü, ù, ú, û, or ü)

You can insert or type u with an accent mark in PowerPoint using built-in tools or keyboard shortcuts (including Alt code shortcuts). The letter u can be inserted with an accent in both upper or lower case. The following are common accented characters that you can insert or type in PowerPoint in upper or lower case: grave (Ù or ù), acute (Ú or ú), circumflex (Û or û) and umlaut (Ü or ü).

How to Insert or Type O with an Accent Mark in PowerPoint (Ò, Ó, Ô, Õ, Ö, ò, ó, ô, õ or ö)

How to Insert or Type O with an Accent Mark in PowerPoint (Ò, Ó, Ô, Õ, Ö, ò, ó, ô, õ or ö)

You can insert or type o with an accent mark in PowerPoint using built-in tools or keyboard shortcuts (including Alt code shortcuts). The letter o can be inserted with an accent in both upper or lower case. The following are common accented characters that you can insert or type in PowerPoint in upper or lower case: grave (Ò or ò), acute (Ó or ó), circumflex (Ô or ô), tilde (Õ or õ) and umlaut (Ö or ö).

Microsoft, the Microsoft logo, Microsoft Office and related Microsoft applications and logos are registered trademarks of Microsoft Corporation in Canada, US and other countries. All other trademarks are the property of the registered owners.

Avantix Learning |18 King Street East, Suite 1400, Toronto, Ontario, Canada M5C 1C4 | Contact us at [email protected]

How to Loop a PowerPoint Slide Show to Repeat Automatically

Our Courses

Avantix Learning courses are offered online in virtual classroom format or as in-person classroom training. Our hands-on, instructor-led courses are available both as public scheduled courses or on demand as a custom training solution.

All Avantix Learning courses include a comprehensive course manual including tips, tricks and shortcuts as well as sample and exercise files.

VIEW COURSES  >

Contact us at  [email protected]  for more information about any of our courses or to arrange custom training.

Privacy Overview

Pin it on pinterest.

  • Print Friendly

How to Loop a Powerpoint Office 365 Slideshow

For typical Powerpoint presentations that you just show to one person, you likely aren’t concerned with what happens when the slideshow is over.

But some situations call for a slideshow to continue playing for an extended period of time.

This means that you will need to learn how to loop a Powerpoint Office 365 presentation so that it plays continuously.

How to Do a Powerpoint for Office 365 Slideshow Loop

  • Open the presentation.
  • Select the Slide Show tab.
  • Choose Set Up Slide Show .
  • Check the Loop continuously until Esc box.
  • Click the top slide, hold down Shift , then click the last slide.
  • Choose the Transitions tab.
  • Uncheck On Mouse Click , check After , then set a duration for each slide.

Our guide continues below with more information on how to loop a Powerpoint Office 365 presentation, including pictures of these steps.

Sometimes you will create a presentation in Powerpoint that is going to be shown someplace where it will be unattended.

This could be at a trade show, in an office, or anywhere else where there is a TV or computer screen.

Constantly having to restart that slideshow yourself is often impractical, and would be tedious even if you were physically able to attend to it.

Fortunately, it’s possible to create a slideshow loop in Powerpoint so that the presentation will play continuously once it has concluded.

Our guide below will show you how to create a Powerpoint slideshow loop in Microsoft Powerpoint for Office 365.

Documents with pictures often need some adjustments before they look their best. You can find out more with our how to flip an image in Word article .

How to Make a Powerpoint Slideshow Loop (Guide with Pictures)

The steps in this article were performed in the Microsoft Powerpoint for Office 365 version of the application, but will work in most other versions of the application as well.

Note that the presentation can loop on its own, but you may need to adjust any screensaver or hibernation settings on your computer so that the screen will remain on.

Step 1: Open your slideshow in Powerpoint.

Step 2: click the slide show tab at the top of the window..

click the Slide Show tab

Step 3: Click the Set Up Slide Show button.

click the Set Up Slide Show button

Step 4: Check the box to the left of Loop continuously until Esc , then click OK .

how to loop a slideshow in Powerpoint for Office 365

Step 5: Click your first slide in the column at the left side of the window, then hold down the Shift key, scroll down and click the last slide.

select all your slides

Step 6: Select the Transitions tab at the top of the window.

click the Transitions tab

Step 7: Click the box to the left of On Mouse Click to remove the check mark, check the box to the left of After , then choose the amount of time to display each slide.

set timings for the slides

I have set my slideshow to display each slide for 5 seconds in the image above.

You can start your slideshow at any time by pressing the F5 key on your keyboard.

You can stop the slideshow by pressing the Esc key on your keyboard.

You should now know how to loop a Powerpoint Office 365 presentation so that it continuously plays on repeat until you press the Esc key on your keyboard to terminate it.

Find out how to change your slide size in Powerpoint if you need a different orientation or slide dimensions for your presentation.

Matt Jacobs Support Your Tech

Matt Jacobs has been working as an IT consultant for small businesses since receiving his Master’s degree in 2003. While he still does some consulting work, his primary focus now is on creating technology support content for SupportYourTech.com.

His work can be found on many websites and focuses on topics such as Microsoft Office, Apple devices, Android devices, Photoshop, and more.

Share this:

  • Click to share on Twitter (Opens in new window)
  • Click to share on Facebook (Opens in new window)

Related Posts

  • How to Rotate a Powerpoint Slide Presentation
  • How to Mirror Image in PPT Files (An Easy 6 Step Guide)
  • How to Change Slide Size in Powerpoint 2016
  • How to Do a Powerpoint Google Slides Presentation Conversion
  • How to Add a Hyperlink on Google Slides
  • Can You Print a Google Slide?
  • How to Make Google Slides Vertical (5 Quick Steps)
  • How to Save a Picture to Your Computer from Powerpoint for Office 365
  • How to Stop Hiding a Slide in Google Slides
  • How to Skip a Slide in Google Slides
  • How to Make Columns in Word Office 365
  • How to Make Text Vertical in Google Docs
  • How to Set Google Docs Background Image
  • Can You Download Google Slides Files?
  • How to Save a Single Slide as a Picture in Google Slides
  • How to Change Page Color in Word for Office 365 (An Easy 4 Step Guide)
  • How to Get the Excel 365 Developer Tab in Microsoft Excel for Office Today
  • How to Not Print Comments in Word (An Easy 5 Step Guide)
  • How to Double Space in Word Office 365
  • How to Bring an Image to the Front in Google Slides

Get Our Free Newsletter

How-to guides and tech deals

You may opt out at any time. Read our Privacy Policy

How to Loop a PowerPoint Presentation?

How to Loop a PowerPoint Presentation?

Table of Contents

PowerPoint presentations are a go-to for clear and informative content delivery. But what if you want your presentation to run on repeat, like at a kiosk or digital sign? The good news is, that PowerPoint has a built-in feature to loop your slideshow, ensuring your message stays on display without interruption. 

This blog post will guide you through the simple steps to set your presentation on a loop, keeping your audience engaged and informed around the clock.

What is PowerPoint Looping?

Normally, in a PowerPoint presentation, you have to manually move from one slide to the next by pressing keys on the keyboard or clicking buttons on a mouse or presentation remote.

However, when you enable looping in PowerPoint, the presentation progresses automatically from one slide to the next without requiring manual input. This eliminates the need for the presenter to interact with the computer or mouse during the presentation.

With PowerPoint looping, you can also set each slide to display automatically for a specified duration, determined by you. Once the preset time elapses, the next slide seamlessly appears. Additionally, upon reaching the final slide, the slideshow automatically starts over from the beginning.

Why Do You Need to Loop Your Slideshow in PowerPoint? 

There are several reasons why you might want to loop your slideshow in PowerPoint:

  • Unattended Presentations: Looping is ideal for situations where the presentation runs without a presenter. This could be at a kiosk, trade show booth, or in a waiting room. Looping ensures the information is continuously displayed for viewers to come and go as they please.
  • Automated Playback: Looping allows for a hands-off presentation experience. Once started, the presentation progresses automatically, freeing you up to greet attendees or answer questions.
  • Self-Paced Learning: Looping can be useful for self-paced learning environments. Viewers can revisit slides or take breaks without needing someone to control the flow.
  • Continuous Engagement: Looping keeps the audience engaged with a constant stream of information. This can be beneficial for displaying menus, directions, or other ongoing updates.

Create presentation slides with AI in Seconds in Google Slides

10M+ Installs

Works with Google Slides

slidesai

How to Make a PowerPoint Presentation loop?

Ready to loop your presentation? Here’s how it’s done:

Step 1:  Open your PowerPoint and head over to the “Slide Show” tab.

Step 2:  Click the button that says “Set Up Slide Show.” A new window will pop up.

Step 3:  Under “Show options,” find the magic checkbox that says “Loop continuously until ‘Esc’.” Check that box to make your presentation run on repeat.

Step 4:  Want to control how long each slide shows? Look for the option “Automatically advance slides” and check it. Then, use the up and down arrows to set the display time for each slide.

Step 5:  Once you’re happy with the settings, click “OK” to save them.

Step 6: Time to loop! Go back to the “Slide Show” tab and click “From Beginning” (or “From Start”). Your presentation will start playing and keep going until you press the “Esc” key.

How To Loop a PowerPoint SlideShow from Selected Slides?

PowerPoint lets you loop a customized selection of slides, creating engaging presentations that run unattended. This eliminates the need for manual slide changes while maintaining audience interest. Here’s how to loop specific slides:

Step 1:  Select Slides: In the Slide Sorter view, hold “Shift” and click the first and last slides you want to loop.

Step 2:  Enable Looping: Go to the “Slide Show” tab and click “Set Up Show.” Check the box for “Loop continuously until ‘Esc'” and choose “Show slides” from the dropdown menu. Select “From” and enter the slide number where your loop should begin.

Step 3:  Create Custom Show (Optional): For easier access, name your looped sequence as a “Custom Show” within the “Set Up Show” dialog.

Step 4:  Start Looping: Navigate back to the “Slide Show” tab and choose “Custom Slide Show” to launch your looped presentation.

Closing Thoughts

Looping your PowerPoint presentation is a simple yet powerful technique that unlocks a variety of use cases. By following these steps, you can ensure your message runs continuously, keeping your audience informed and engaged, whether it’s at a kiosk, trade show booth, waiting room, or any other scenario that demands unattended playback. 

  • No design skills required
  • 3 presentations/month free
  • Don’t need to learn a new software

slidesai

Frequently Asked Questions

My presentation has animations and transitions. will they loop as well.

Absolutely! When you loop your presentation, animations and transitions will also repeat continuously, regardless of the looping method you choose.

Does looping affect animation timing?

There’s a possibility. Looping might affect how your animations play out, especially if they have specific timings set. To avoid any hiccups, be sure to thoroughly test your looped presentation. This will ensure your animations sync smoothly with the slide transitions.

Can I loop specific slides in my PowerPoint presentation?

Yes! PowerPoint gives you the flexibility to loop a selected group of slides, creating engaging presentations that run unattended.

How do I stop or pause a looped slideshow in PowerPoint?

Need a break? Simply press the “Esc” key on your keyboard to interrupt the looped slideshow at any time.

Can I customize the duration of each slide in a looped PowerPoint presentation?

Yes, you can! PowerPoint allows you to adjust the slide transition settings for each slide. This lets you control how long each slide displays, creating a tailored and dynamic looping experience.

Related Posts

How to Create Agenda Slide in Powerpoint?

How to Create Agenda Slide in Powerpoint?

Ever feel like your PowerPoint presentations could benefit from a strong start? Using an agenda slide at the beginning can be a helpful way to take charge of your presentation from the get-go.

How to End a PowerPoint Presentation?

How to End a PowerPoint Presentation?

Picture this: The lights dim, the room hushes, and your presentation is in full swing. But as you near the end, there’s a sense of anticipation, not boredom. Your audience leans in, hungry for that final spark to ignite their minds. That’s the power of a captivating conclusion. The secret sauce that leaves your audience […]

7X7 Rule in PPT (PowerPoint Presentation)

7X7 Rule in PPT (PowerPoint Presentation)

Captivate your audience with impactful presentations using the 7×7 rule. This design principle encourages a clear and focused approach by limiting slides to a mere 7 lines of text, each containing a maximum of 7 words. By adhering to this format, you can craft presentations that are not only easy to digest but also leave a lasting impression on your viewers. Let’s jump into the article and find out how it works.

Save Time and Effortlessly Create Presentations with SlidesAI

App screenshot

IMAGES

  1. How to Loop a PowerPoint Presentation

    how do i loop a ppt presentation

  2. How To Loop A Slide Show Presentation in Microsoft PowerPoint? « tips4msword

    how do i loop a ppt presentation

  3. How to Loop Powerpoint

    how do i loop a ppt presentation

  4. How to Loop a PowerPoint

    how do i loop a ppt presentation

  5. Loop your PPT to Run it Automatically

    how do i loop a ppt presentation

  6. How to Loop a PowerPoint Presentation

    how do i loop a ppt presentation

VIDEO

  1. Loop your Animations in PPT #powerpoint #powerpointdesign #pptanimation #tutorial

  2. iPad How To: Create a looped Google slide presentation

  3. How To Make PowerPoint Animations Loop

  4. How to Loop Canva Presentation

  5. How to configure Google Slide Presentation to Auto Loop

  6. How to Make Google Slides Loop 3 Methods

COMMENTS

  1. How to Loop a PowerPoint Presentation - How-To Geek

    If you're showing off a lot of photos at a special event, set your presentation to progress at a continuous, automatic loop. Here's how.

  2. How to Loop a PowerPoint Slide Show to Repeat Automatically

    You can set up a PowerPoint slide show to loop or repeat automatically. A looping presentation can be used at events, trade shows or even in a reception area in an office. The easiest way to set up a slide show to loop or replay continuously is to apply automatic transitions and then configure Slide Show settings.

  3. How to Loop a Powerpoint Presentation: Step-by-Step Guide

    Looping a PowerPoint presentation is an easy way to keep your slides on repeat for an audience or a display. It’s perfect for trade shows, informational kiosks, and even personal use when you don’t want to manually control the presentation.

  4. How to make a PowerPoint Presentation loop / repeat itself ...

    In this Microsoft PowerPoint tutorial we are going to teach you how to loop a PowerPoint Presentation so your PowerPoint Slideshow will run again and again ...

  5. How to Loop a Powerpoint Office 365 Slideshow

    Step 1: Open your slideshow in Powerpoint. Step 2: Click the Slide Show tab at the top of the window. Step 3: Click the Set Up Slide Show button. Step 4: Check the box to the left of Loop continuously until Esc, then click OK.

  6. How to Loop a PowerPoint Presentation? - SlidesAI

    The good news is, that PowerPoint has a built-in feature to loop your slideshow, ensuring your message stays on display without interruption. This blog post will guide you through the simple steps to set your presentation on a loop, keeping your audience engaged and informed around the clock.