what should be included in abstract dissertation

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base
• Dissertation
• How to Write an Abstract | Steps & Examples

How to Write an Abstract | Steps & Examples

Published on February 28, 2019 by Shona McCombes . Revised on July 18, 2023 by Eoghan Ryan.

An abstract is a short summary of a longer work (such as a thesis ,  dissertation or research paper ). The abstract concisely reports the aims and outcomes of your research, so that readers know exactly what your paper is about.

Although the structure may vary slightly depending on your discipline, your abstract should describe the purpose of your work, the methods you’ve used, and the conclusions you’ve drawn.

One common way to structure your abstract is to use the IMRaD structure. This stands for:

• Introduction

Abstracts are usually around 100–300 words, but there’s often a strict word limit, so make sure to check the relevant requirements.

In a dissertation or thesis , include the abstract on a separate page, after the title page and acknowledgements but before the table of contents .

Instantly correct all language mistakes in your text

Upload your document to correct all your mistakes in minutes

Table of contents

Abstract example, when to write an abstract, step 1: introduction, step 2: methods, step 3: results, step 4: discussion, tips for writing an abstract, other interesting articles, frequently asked questions about abstracts.

Hover over the different parts of the abstract to see how it is constructed.

This paper examines the role of silent movies as a mode of shared experience in the US during the early twentieth century. At this time, high immigration rates resulted in a significant percentage of non-English-speaking citizens. These immigrants faced numerous economic and social obstacles, including exclusion from public entertainment and modes of discourse (newspapers, theater, radio).

Incorporating evidence from reviews, personal correspondence, and diaries, this study demonstrates that silent films were an affordable and inclusive source of entertainment. It argues for the accessible economic and representational nature of early cinema. These concerns are particularly evident in the low price of admission and in the democratic nature of the actors’ exaggerated gestures, which allowed the plots and action to be easily grasped by a diverse audience despite language barriers.

Keywords: silent movies, immigration, public discourse, entertainment, early cinema, language barriers.

Don't submit your assignments before you do this

The academic proofreading tool has been trained on 1000s of academic texts. Making it the most accurate and reliable proofreading tool for students. Free citation check included.

Try for free

You will almost always have to include an abstract when:

• Completing a thesis or dissertation
• Submitting a research paper to an academic journal
• Writing a book or research proposal
• Applying for research grants

It’s easiest to write your abstract last, right before the proofreading stage, because it’s a summary of the work you’ve already done. Your abstract should:

• Be a self-contained text, not an excerpt from your paper
• Be fully understandable on its own
• Reflect the structure of your larger work

Start by clearly defining the purpose of your research. What practical or theoretical problem does the research respond to, or what research question did you aim to answer?

You can include some brief context on the social or academic relevance of your dissertation topic , but don’t go into detailed background information. If your abstract uses specialized terms that would be unfamiliar to the average academic reader or that have various different meanings, give a concise definition.

After identifying the problem, state the objective of your research. Use verbs like “investigate,” “test,” “analyze,” or “evaluate” to describe exactly what you set out to do.

This part of the abstract can be written in the present or past simple tense  but should never refer to the future, as the research is already complete.

• This study will investigate the relationship between coffee consumption and productivity.
• This study investigates the relationship between coffee consumption and productivity.

Next, indicate the research methods that you used to answer your question. This part should be a straightforward description of what you did in one or two sentences. It is usually written in the past simple tense, as it refers to completed actions.

• Structured interviews will be conducted with 25 participants.
• Structured interviews were conducted with 25 participants.

Don’t evaluate validity or obstacles here — the goal is not to give an account of the methodology’s strengths and weaknesses, but to give the reader a quick insight into the overall approach and procedures you used.

Next, summarize the main research results . This part of the abstract can be in the present or past simple tense.

• Our analysis has shown a strong correlation between coffee consumption and productivity.
• Our analysis shows a strong correlation between coffee consumption and productivity.
• Our analysis showed a strong correlation between coffee consumption and productivity.

Depending on how long and complex your research is, you may not be able to include all results here. Try to highlight only the most important findings that will allow the reader to understand your conclusions.

Finally, you should discuss the main conclusions of your research : what is your answer to the problem or question? The reader should finish with a clear understanding of the central point that your research has proved or argued. Conclusions are usually written in the present simple tense.

• We concluded that coffee consumption increases productivity.
• We conclude that coffee consumption increases productivity.

If there are important limitations to your research (for example, related to your sample size or methods), you should mention them briefly in the abstract. This allows the reader to accurately assess the credibility and generalizability of your research.

If your aim was to solve a practical problem, your discussion might include recommendations for implementation. If relevant, you can briefly make suggestions for further research.

If your paper will be published, you might have to add a list of keywords at the end of the abstract. These keywords should reference the most important elements of the research to help potential readers find your paper during their own literature searches.

Be aware that some publication manuals, such as APA Style , have specific formatting requirements for these keywords.

It can be a real challenge to condense your whole work into just a couple of hundred words, but the abstract will be the first (and sometimes only) part that people read, so it’s important to get it right. These strategies can help you get started.

Read other abstracts

The best way to learn the conventions of writing an abstract in your discipline is to read other people’s. You probably already read lots of journal article abstracts while conducting your literature review —try using them as a framework for structure and style.

You can also find lots of dissertation abstract examples in thesis and dissertation databases .

Reverse outline

Not all abstracts will contain precisely the same elements. For longer works, you can write your abstract through a process of reverse outlining.

For each chapter or section, list keywords and draft one to two sentences that summarize the central point or argument. This will give you a framework of your abstract’s structure. Next, revise the sentences to make connections and show how the argument develops.

Write clearly and concisely

A good abstract is short but impactful, so make sure every word counts. Each sentence should clearly communicate one main point.

To keep your abstract or summary short and clear:

• Avoid passive sentences: Passive constructions are often unnecessarily long. You can easily make them shorter and clearer by using the active voice.
• Avoid long sentences: Substitute longer expressions for concise expressions or single words (e.g., “In order to” for “To”).
• Avoid obscure jargon: The abstract should be understandable to readers who are not familiar with your topic.
• Avoid repetition and filler words: Replace nouns with pronouns when possible and eliminate unnecessary words.
• Avoid detailed descriptions: An abstract is not expected to provide detailed definitions, background information, or discussions of other scholars’ work. Instead, include this information in the body of your thesis or paper.

If you’re struggling to edit down to the required length, you can get help from expert editors with Scribbr’s professional proofreading services or use the paraphrasing tool .

Check your formatting

If you are writing a thesis or dissertation or submitting to a journal, there are often specific formatting requirements for the abstract—make sure to check the guidelines and format your work correctly. For APA research papers you can follow the APA abstract format .

Checklist: Abstract

The word count is within the required length, or a maximum of one page.

The abstract appears after the title page and acknowledgements and before the table of contents .

I have clearly stated my research problem and objectives.

I have briefly described my methodology .

I have summarized the most important results .

I have stated my main conclusions .

I have mentioned any important limitations and recommendations.

The abstract can be understood by someone without prior knowledge of the topic.

You've written a great abstract! Use the other checklists to continue improving your thesis or dissertation.

If you want to know more about AI for academic writing, AI tools, or research bias, make sure to check out some of our other articles with explanations and examples or go directly to our tools!

Research bias

• Anchoring bias
• Halo effect
• The Baader–Meinhof phenomenon
• The placebo effect
• Nonresponse bias
• Deep learning
• Generative AI
• Machine learning
• Reinforcement learning
• Supervised vs. unsupervised learning

 (AI) Tools

• Grammar Checker
• Paraphrasing Tool
• Text Summarizer
• AI Detector
• Plagiarism Checker
• Citation Generator

An abstract is a concise summary of an academic text (such as a journal article or dissertation ). It serves two main purposes:

• To help potential readers determine the relevance of your paper for their own research.
• To communicate your key findings to those who don’t have time to read the whole paper.

Abstracts are often indexed along with keywords on academic databases, so they make your work more easily findable. Since the abstract is the first thing any reader sees, it’s important that it clearly and accurately summarizes the contents of your paper.

An abstract for a thesis or dissertation is usually around 200–300 words. There’s often a strict word limit, so make sure to check your university’s requirements.

The abstract is the very last thing you write. You should only write it after your research is complete, so that you can accurately summarize the entirety of your thesis , dissertation or research paper .

Avoid citing sources in your abstract . There are two reasons for this:

• The abstract should focus on your original research, not on the work of others.
• The abstract should be self-contained and fully understandable without reference to other sources.

There are some circumstances where you might need to mention other sources in an abstract: for example, if your research responds directly to another study or focuses on the work of a single theorist. In general, though, don’t include citations unless absolutely necessary.

The abstract appears on its own page in the thesis or dissertation , after the title page and acknowledgements but before the table of contents .

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

McCombes, S. (2023, July 18). How to Write an Abstract | Steps & Examples. Scribbr. Retrieved August 12, 2024, from https://www.scribbr.com/dissertation/abstract/

Is this article helpful?

Shona McCombes

Other students also liked, how to write a thesis or dissertation introduction, shorten your abstract or summary, how to write a literature review | guide, examples, & templates, what is your plagiarism score.

• How to Write an Abstract for a Dissertation or Thesis
• Doing a PhD

What is a Thesis or Dissertation Abstract?

The Cambridge English Dictionary defines an abstract in academic writing as being “ a few sentences that give the main ideas in an article or a scientific paper ” and the Collins English Dictionary says “ an abstract of an article, document, or speech is a short piece of writing that gives the main points of it ”.

Whether you’re writing up your Master’s dissertation or PhD thesis, the abstract will be a key element of this document that you’ll want to make sure you give proper attention to.

What is the Purpose of an Abstract?

The aim of a thesis abstract is to give the reader a broad overview of what your research project was about and what you found that was novel, before he or she decides to read the entire thesis. The reality here though is that very few people will read the entire thesis, and not because they’re necessarily disinterested but because practically it’s too large a document for most people to have the time to read. The exception to this is your PhD examiner, however know that even they may not read the entire length of the document.

Some people may still skip to and read specific sections throughout your thesis such as the methodology, but the fact is that the abstract will be all that most read and will therefore be the section they base their opinions about your research on. In short, make sure you write a good, well-structured abstract.

How Long Should an Abstract Be?

If you’re a PhD student, having written your 100,000-word thesis, the abstract will be the 300 word summary included at the start of the thesis that succinctly explains the motivation for your study (i.e. why this research was needed), the main work you did (i.e. the focus of each chapter), what you found (the results) and concluding with how your research study contributed to new knowledge within your field.

Woodrow Wilson, the 28th President of the United States of America, once famously said:

The point here is that it’s easier to talk open-endedly about a subject that you know a lot about than it is to condense the key points into a 10-minute speech; the same applies for an abstract. Three hundred words is not a lot of words which makes it even more difficult to condense three (or more) years of research into a coherent, interesting story.

What Makes a Good PhD Thesis Abstract?

Whilst the abstract is one of the first sections in your PhD thesis, practically it’s probably the last aspect that you’ll ending up writing before sending the document to print. The reason being that you can’t write a summary about what you did, what you found and what it means until you’ve done the work.

A good abstract is one that can clearly explain to the reader in 300 words:

• What your research field actually is,
• What the gap in knowledge was in your field,
• The overarching aim and objectives of your PhD in response to these gaps,
• What methods you employed to achieve these,
• You key results and findings,
• How your work has added to further knowledge in your field of study.

Another way to think of this structure is:

• Introduction,
• Aims and objectives,
• Discussion,
• Conclusion.

Following this ‘formulaic’ approach to writing the abstract should hopefully make it a little easier to write but you can already see here that there’s a lot of information to convey in a very limited number of words.

How Do You Write a Good PhD Thesis Abstract?

The biggest challenge you’ll have is getting all the 6 points mentioned above across in your abstract within the limit of 300 words . Your particular university may give some leeway in going a few words over this but it’s good practice to keep within this; the art of succinctly getting your information across is an important skill for a researcher to have and one that you’ll be called on to use regularly as you write papers for peer review.

Keep It Concise

Every word in the abstract is important so make sure you focus on only the key elements of your research and the main outcomes and significance of your project that you want the reader to know about. You may have come across incidental findings during your research which could be interesting to discuss but this should not happen in the abstract as you simply don’t have enough words. Furthermore, make sure everything you talk about in your thesis is actually described in the main thesis.

Make a Unique Point Each Sentence

Keep the sentences short and to the point. Each sentence should give the reader new, useful information about your research so there’s no need to write out your project title again. Give yourself one or two sentences to introduce your subject area and set the context for your project. Then another sentence or two to explain the gap in the knowledge; there’s no need or expectation for you to include references in the abstract.

Explain Your Research

Some people prefer to write their overarching aim whilst others set out their research questions as they correspond to the structure of their thesis chapters; the approach you use is up to you, as long as the reader can understand what your dissertation or thesis had set out to achieve. Knowing this will help the reader better understand if your results help to answer the research questions or if further work is needed.

Keep It Factual

Keep the content of the abstract factual; that is to say that you should avoid bringing too much or any opinion into it, which inevitably can make the writing seem vague in the points you’re trying to get across and even lacking in structure.

Write, Edit and Then Rewrite

Spend suitable time editing your text, and if necessary, completely re-writing it. Show the abstract to others and ask them to explain what they understand about your research – are they able to explain back to you each of the 6 structure points, including why your project was needed, the research questions and results, and the impact it had on your research field? It’s important that you’re able to convey what new knowledge you contributed to your field but be mindful when writing your abstract that you don’t inadvertently overstate the conclusions, impact and significance of your work.

Thesis and Dissertation Abstract Examples

Perhaps the best way to understand how to write a thesis abstract is to look at examples of what makes a good and bad abstract.

Example of A Bad Abstract

Let’s start with an example of a bad thesis abstract:

In this project on “The Analysis of the Structural Integrity of 3D Printed Polymers for use in Aircraft”, my research looked at how 3D printing of materials can help the aviation industry in the manufacture of planes. Plane parts can be made at a lower cost using 3D printing and made lighter than traditional components. This project investigated the structural integrity of EBM manufactured components, which could revolutionise the aviation industry.

What Makes This a Bad Abstract

Hopefully you’ll have spotted some of the reasons this would be considered a poor abstract, not least because the author used up valuable words by repeating the lengthy title of the project in the abstract.

Working through our checklist of the 6 key points you want to convey to the reader:

• There has been an attempt to introduce the research area , albeit half-way through the abstract but it’s not clear if this is a materials science project about 3D printing or is it about aircraft design.
• There’s no explanation about where the gap in the knowledge is that this project attempted to address.
• We can see that this project was focussed on the topic of structural integrity of materials in aircraft but the actual research aims or objectives haven’t been defined.
• There’s no mention at all of what the author actually did to investigate structural integrity. For example was this an experimental study involving real aircraft, or something in the lab, computer simulations etc.
• The author also doesn’t tell us a single result of his research, let alone the key findings !
• There’s a bold claim in the last sentence of the abstract that this project could revolutionise the aviation industry, and this may well be the case, but based on the abstract alone there is no evidence to support this as it’s not even clear what the author did .

This is an extreme example but is a good way to illustrate just how unhelpful a poorly written abstract can be. At only 71 words long, it definitely hasn’t maximised the amount of information that could be presented and the what they have presented has lacked clarity and structure.

A final point to note is the use of the EBM acronym, which stands for Electron Beam Melting in the context of 3D printing; this is a niche acronym for the author to assume that the reader would know the meaning of. It’s best to avoid acronyms in your abstract all together even if it’s something that you might expect most people to know about, unless you specifically define the meaning first.

Example of A Good Abstract

Having seen an example of a bad thesis abstract, now lets look at an example of a good PhD thesis abstract written about the same (fictional) project:

Additive manufacturing (AM) of titanium alloys has the potential to enable cheaper and lighter components to be produced with customised designs for use in aircraft engines. Whilst the proof-of-concept of these have been promising, the structural integrity of AM engine parts in response to full thrust and temperature variations is not clear.

The primary aim of this project was to determine the fracture modes and mechanisms of AM components designed for use in Boeing 747 engines. To achieve this an explicit finite element (FE) model was developed to simulate the environment and parameters that the engine is exposed to during flight. The FE model was validated using experimental data replicating the environmental parameters in a laboratory setting using ten AM engine components provided by the industry sponsor. The validated FE model was then used to investigate the extent of crack initiation and propagation as the environment parameters were adjusted.

This project was the first to investigate fracture patterns in AM titanium components used in aircraft engines; the key finding was that the presence of cavities within the structures due to errors in the printing process, significantly increased the risk of fracture. Secondly, the simulations showed that cracks formed within AM parts were more likely to worsen and lead to component failure at subzero temperatures when compared to conventionally manufactured parts. This has demonstrated an important safety concern which needs to be addressed before AM parts can be used in commercial aircraft.

What Makes This a Good Abstract

Having read this ‘good abstract’ you should have a much better understand about what the subject area is about, where the gap in the knowledge was, the aim of the project, the methods that were used, key results and finally the significance of these results. To break these points down further, from this good abstract we now know that:

• The research area is around additive manufacturing (i.e. 3D printing) of materials for use in aircraft.
• The gap in knowledge was how these materials will behave structural when used in aircraft engines.
• The aim was specifically to investigate how the components can fracture.
• The methods used to investigate this were a combination of computational and lab based experimental modelling.
• The key findings were the increased risk of fracture of these components due to the way they are manufactured.
• The significance of these findings were that it showed a potential risk of component failure that could comprise the safety of passengers and crew on the aircraft.

The abstract text has a much clearer flow through these different points in how it’s written and has made much better use of the available word count. Acronyms have even been used twice in this good abstract but they were clearly defined the first time they were introduced in the text so that there was no confusion about their meaning.

The abstract you write for your dissertation or thesis should succinctly explain to the reader why the work of your research was needed, what you did, what you found and what it means. Most people that come across your thesis, including any future employers, are likely to read only your abstract. Even just for this reason alone, it’s so important that you write the best abstract you can; this will not only convey your research effectively but also put you in the best light possible as a researcher.

Browse PhDs Now

Join thousands of students.

Join thousands of other students and stay up to date with the latest PhD programmes, funding opportunities and advice.

Academic & Employability Skills

Subscribe to academic & employability skills.

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Email Address

Writing an abstract - a six point checklist (with samples)

Posted in: abstract , dissertations

The abstract is a vital part of any research paper. It is the shop front for your work, and the first stop for your reader. It should provide a clear and succinct summary of your study, and encourage your readers to read more. An effective abstract, therefore should answer the following questions:

• Why did you do this study or project?
• What did you do and how?
• What did you find?
• What do your findings mean?

So here's our run down of the key elements of a well-written abstract.

• Size - A succinct and well written abstract should be between approximately 100- 250 words.
• Background - An effective abstract usually includes some scene-setting information which might include what is already known about the subject, related to the paper in question (a few short sentences).
• Purpose  - The abstract should also set out the purpose of your research, in other words, what is not known about the subject and hence what the study intended to examine (or what the paper seeks to present).
• Methods - The methods section should contain enough information to enable the reader to understand what was done, and how. It should include brief details of the research design, sample size, duration of study, and so on.
• Results - The results section is the most important part of the abstract. This is because readers who skim an abstract do so to learn about the findings of the study. The results section should therefore contain as much detail about the findings as the journal word count permits.
• Conclusion - This section should contain the most important take-home message of the study, expressed in a few precisely worded sentences. Usually, the finding highlighted here relates to the primary outcomes of the study. However, other important or unexpected findings should also be mentioned. It is also customary, but not essential, to express an opinion about the theoretical or practical implications of the findings, or the importance of their findings for the field. Thus, the conclusions may contain three elements:
• The primary take-home message.
• Any additional findings of importance.
• Implications for future studies.

Example Abstract 2: Engineering Development and validation of a three-dimensional finite element model of the pelvic bone.

Abstract from: Dalstra, M., Huiskes, R. and Van Erning, L., 1995. Development and validation of a three-dimensional finite element model of the pelvic bone. Journal of biomechanical engineering, 117(3), pp.272-278.

And finally...  A word on abstract types and styles

Abstract types can differ according to subject discipline. You need to determine therefore which type of abstract you should include with your paper. Here are two of the most common types with examples.

Informative Abstract

The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the researcher presents and explains all the main arguments and the important results and evidence in the paper. An informative abstract includes the information that can be found in a descriptive abstract [purpose, methods, scope] but it also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is usually no more than 300 words in length.

Descriptive Abstract A descriptive abstract indicates the type of information found in the work. It makes no judgements about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract only describes the work being summarised. Some researchers consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short, 100 words or less.

Adapted from Andrade C. How to write a good abstract for a scientific paper or conference presentation. Indian J Psychiatry. 2011 Apr;53(2):172-5. doi: 10.4103/0019-5545.82558. PMID: 21772657; PMCID: PMC3136027 .

Share this:

• Click to print (Opens in new window)
• Click to email a link to a friend (Opens in new window)
• Click to share on WhatsApp (Opens in new window)
• Click to share on LinkedIn (Opens in new window)
• Click to share on Twitter (Opens in new window)
• Click to share on Facebook (Opens in new window)

Click here to cancel reply.

• Email * (we won't publish this)

Write a response

Navigating the dissertation process: my tips for final years

Imagine for a moment... After months of hard work and research on a topic you're passionate about, the time has finally come to click the 'Submit' button on your dissertation. You've just completed your longest project to date as part...

8 ways to beat procrastination

Whether you’re writing an assignment or revising for exams, getting started can be hard. Fortunately, there’s lots you can do to turn procrastination into action.

My takeaways on how to write a scientific report

If you’re in your dissertation writing stage or your course includes writing a lot of scientific reports, but you don’t quite know where and how to start, the Skills Centre can help you get started. I recently attended their ‘How...

• Grammar Checker
• Paraphrasing Tool
• Critique Report
• Writing Reports
• Learn Blog Grammar Guide Community Events FAQ
• Grammar Guide

How to Write an Abstract (With Examples)

By Sarah Oakley

Table of Contents

What is an abstract in a paper, how long should an abstract be, 5 steps for writing an abstract, examples of an abstract, how prowritingaid can help you write an abstract.

If you are writing a scientific research paper or a book proposal, you need to know how to write an abstract, which summarizes the contents of the paper or book.

When researchers are looking for peer-reviewed papers to use in their studies, the first place they will check is the abstract to see if it applies to their work. Therefore, your abstract is one of the most important parts of your entire paper.

In this article, we’ll explain what an abstract is, what it should include, and how to write one.

An abstract is a concise summary of the details within a report. Some abstracts give more details than others, but the main things you’ll be talking about are why you conducted the research, what you did, and what the results show.

When a reader is deciding whether to read your paper completely, they will first look at the abstract. You need to be concise in your abstract and give the reader the most important information so they can determine if they want to read the whole paper.

Remember that an abstract is the last thing you’ll want to write for the research paper because it directly references parts of the report. If you haven’t written the report, you won’t know what to include in your abstract.

If you are writing a paper for a journal or an assignment, the publication or academic institution might have specific formatting rules for how long your abstract should be. However, if they don’t, most abstracts are between 150 and 300 words long.

A short word count means your writing has to be precise and without filler words or phrases. Once you’ve written a first draft, you can always use an editing tool, such as ProWritingAid, to identify areas where you can reduce words and increase readability.

If your abstract is over the word limit, and you’ve edited it but still can’t figure out how to reduce it further, your abstract might include some things that aren’t needed. Here’s a list of three elements you can remove from your abstract:

Discussion : You don’t need to go into detail about the findings of your research because your reader will find your discussion within the paper.

Definition of terms : Your readers are interested the field you are writing about, so they are likely to understand the terms you are using. If not, they can always look them up. Your readers do not expect you to give a definition of terms in your abstract.

References and citations : You can mention there have been studies that support or have inspired your research, but you do not need to give details as the reader will find them in your bibliography.

Good writing = better grades

ProWritingAid will help you improve the style, strength, and clarity of all your assignments.

If you’ve never written an abstract before, and you’re wondering how to write an abstract, we’ve got some steps for you to follow. It’s best to start with planning your abstract, so we’ve outlined the details you need to include in your plan before you write.

Remember to consider your audience when you’re planning and writing your abstract. They are likely to skim read your abstract, so you want to be sure your abstract delivers all the information they’re expecting to see at key points.

1. What Should an Abstract Include?

Abstracts have a lot of information to cover in a short number of words, so it’s important to know what to include. There are three elements that need to be present in your abstract:

Your context is the background for where your research sits within your field of study. You should briefly mention any previous scientific papers or experiments that have led to your hypothesis and how research develops in those studies.

Your hypothesis is your prediction of what your study will show. As you are writing your abstract after you have conducted your research, you should still include your hypothesis in your abstract because it shows the motivation for your paper.

Throughout your abstract, you also need to include keywords and phrases that will help researchers to find your article in the databases they’re searching. Make sure the keywords are specific to your field of study and the subject you’re reporting on, otherwise your article might not reach the relevant audience.

2. Can You Use First Person in an Abstract?

You might think that first person is too informal for a research paper, but it’s not. Historically, writers of academic reports avoided writing in first person to uphold the formality standards of the time. However, first person is more accepted in research papers in modern times.

If you’re still unsure whether to write in first person for your abstract, refer to any style guide rules imposed by the journal you’re writing for or your teachers if you are writing an assignment.

3. Abstract Structure

Some scientific journals have strict rules on how to structure an abstract, so it’s best to check those first. If you don’t have any style rules to follow, try using the IMRaD structure, which stands for Introduction, Methodology, Results, and Discussion.

Following the IMRaD structure, start with an introduction. The amount of background information you should include depends on your specific research area. Adding a broad overview gives you less room to include other details. Remember to include your hypothesis in this section.

The next part of your abstract should cover your methodology. Try to include the following details if they apply to your study:

What type of research was conducted?

How were the test subjects sampled?

What were the sample sizes?

What was done to each group?

How long was the experiment?

How was data recorded and interpreted?

Following the methodology, include a sentence or two about the results, which is where your reader will determine if your research supports or contradicts their own investigations.

The results are also where most people will want to find out what your outcomes were, even if they are just mildly interested in your research area. You should be specific about all the details but as concise as possible.

The last few sentences are your conclusion. It needs to explain how your findings affect the context and whether your hypothesis was correct. Include the primary take-home message, additional findings of importance, and perspective. Also explain whether there is scope for further research into the subject of your report.

Your conclusion should be honest and give the reader the ultimate message that your research shows. Readers trust the conclusion, so make sure you’re not fabricating the results of your research. Some readers won’t read your entire paper, but this section will tell them if it’s worth them referencing it in their own study.

4. How to Start an Abstract

The first line of your abstract should give your reader the context of your report by providing background information. You can use this sentence to imply the motivation for your research.

You don’t need to use a hook phrase or device in your first sentence to grab the reader’s attention. Your reader will look to establish relevance quickly, so readability and clarity are more important than trying to persuade the reader to read on.

5. How to Format an Abstract

Most abstracts use the same formatting rules, which help the reader identify the abstract so they know where to look for it.

Here’s a list of formatting guidelines for writing an abstract:

Stick to one paragraph

Use block formatting with no indentation at the beginning

Put your abstract straight after the title and acknowledgements pages

Use present or past tense, not future tense

There are two primary types of abstract you could write for your paper—descriptive and informative.

An informative abstract is the most common, and they follow the structure mentioned previously. They are longer than descriptive abstracts because they cover more details.

Descriptive abstracts differ from informative abstracts, as they don’t include as much discussion or detail. The word count for a descriptive abstract is between 50 and 150 words.

Here is an example of an informative abstract:

A growing trend exists for authors to employ a more informal writing style that uses “we” in academic writing to acknowledge one’s stance and engagement. However, few studies have compared the ways in which the first-person pronoun “we” is used in the abstracts and conclusions of empirical papers. To address this lacuna in the literature, this study conducted a systematic corpus analysis of the use of “we” in the abstracts and conclusions of 400 articles collected from eight leading electrical and electronic (EE) engineering journals. The abstracts and conclusions were extracted to form two subcorpora, and an integrated framework was applied to analyze and seek to explain how we-clusters and we-collocations were employed. Results revealed whether authors’ use of first-person pronouns partially depends on a journal policy. The trend of using “we” showed that a yearly increase occurred in the frequency of “we” in EE journal papers, as well as the existence of three “we-use” types in the article conclusions and abstracts: exclusive, inclusive, and ambiguous. Other possible “we-use” alternatives such as “I” and other personal pronouns were used very rarely—if at all—in either section. These findings also suggest that the present tense was used more in article abstracts, but the present perfect tense was the most preferred tense in article conclusions. Both research and pedagogical implications are proffered and critically discussed.

Wang, S., Tseng, W.-T., & Johanson, R. (2021). To We or Not to We: Corpus-Based Research on First-Person Pronoun Use in Abstracts and Conclusions. SAGE Open, 11(2).

Here is an example of a descriptive abstract:

From the 1850s to the present, considerable criminological attention has focused on the development of theoretically-significant systems for classifying crime. This article reviews and attempts to evaluate a number of these efforts, and we conclude that further work on this basic task is needed. The latter part of the article explicates a conceptual foundation for a crime pattern classification system, and offers a preliminary taxonomy of crime.

Farr, K. A., & Gibbons, D. C. (1990). Observations on the Development of Crime Categories. International Journal of Offender Therapy and Comparative Criminology, 34(3), 223–237.

If you want to ensure your abstract is grammatically correct and easy to read, you can use ProWritingAid to edit it. The software integrates with Microsoft Word, Google Docs, and most web browsers, so you can make the most of it wherever you’re writing your paper.

Before you edit with ProWritingAid, make sure the suggestions you are seeing are relevant for your document by changing the document type to “Abstract” within the Academic writing style section.

You can use the Readability report to check your abstract for places to improve the clarity of your writing. Some suggestions might show you where to remove words, which is great if you’re over your word count.

We hope the five steps and examples we’ve provided help you write a great abstract for your research paper.

Sarah Oakley

Get started with prowritingaid.

Drop us a line or let's stay in touch via :

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Dissertation
• How to Write an Abstract | Steps & Examples

How to Write an Abstract | Steps & Examples

Published on 1 March 2019 by Shona McCombes . Revised on 10 October 2022 by Eoghan Ryan.

An abstract is a short summary of a longer work (such as a dissertation or research paper ). The abstract concisely reports the aims and outcomes of your research, so that readers know exactly what your paper is about.

Although the structure may vary slightly depending on your discipline, your abstract should describe the purpose of your work, the methods you’ve used, and the conclusions you’ve drawn.

One common way to structure your abstract is to use the IMRaD structure. This stands for:

• Introduction

Abstracts are usually around 100–300 words, but there’s often a strict word limit, so make sure to check the relevant requirements.

In a dissertation or thesis , include the abstract on a separate page, after the title page and acknowledgements but before the table of contents .

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

Table of contents

Abstract example, when to write an abstract, step 1: introduction, step 2: methods, step 3: results, step 4: discussion, tips for writing an abstract, frequently asked questions about abstracts.

Hover over the different parts of the abstract to see how it is constructed.

This paper examines the role of silent movies as a mode of shared experience in the UK during the early twentieth century. At this time, high immigration rates resulted in a significant percentage of non-English-speaking citizens. These immigrants faced numerous economic and social obstacles, including exclusion from public entertainment and modes of discourse (newspapers, theater, radio).

Incorporating evidence from reviews, personal correspondence, and diaries, this study demonstrates that silent films were an affordable and inclusive source of entertainment. It argues for the accessible economic and representational nature of early cinema. These concerns are particularly evident in the low price of admission and in the democratic nature of the actors’ exaggerated gestures, which allowed the plots and action to be easily grasped by a diverse audience despite language barriers.

Keywords: silent movies, immigration, public discourse, entertainment, early cinema, language barriers.

Prevent plagiarism, run a free check.

You will almost always have to include an abstract when:

• Completing a thesis or dissertation
• Submitting a research paper to an academic journal
• Writing a book proposal
• Applying for research grants

It’s easiest to write your abstract last, because it’s a summary of the work you’ve already done. Your abstract should:

• Be a self-contained text, not an excerpt from your paper
• Be fully understandable on its own
• Reflect the structure of your larger work

Start by clearly defining the purpose of your research. What practical or theoretical problem does the research respond to, or what research question did you aim to answer?

You can include some brief context on the social or academic relevance of your topic, but don’t go into detailed background information. If your abstract uses specialised terms that would be unfamiliar to the average academic reader or that have various different meanings, give a concise definition.

After identifying the problem, state the objective of your research. Use verbs like “investigate,” “test,” “analyse,” or “evaluate” to describe exactly what you set out to do.

This part of the abstract can be written in the present or past simple tense  but should never refer to the future, as the research is already complete.

• This study will investigate the relationship between coffee consumption and productivity.
• This study investigates the relationship between coffee consumption and productivity.

Next, indicate the research methods that you used to answer your question. This part should be a straightforward description of what you did in one or two sentences. It is usually written in the past simple tense, as it refers to completed actions.

• Structured interviews will be conducted with 25 participants.
• Structured interviews were conducted with 25 participants.

Don’t evaluate validity or obstacles here — the goal is not to give an account of the methodology’s strengths and weaknesses, but to give the reader a quick insight into the overall approach and procedures you used.

Next, summarise the main research results . This part of the abstract can be in the present or past simple tense.

• Our analysis has shown a strong correlation between coffee consumption and productivity.
• Our analysis shows a strong correlation between coffee consumption and productivity.
• Our analysis showed a strong correlation between coffee consumption and productivity.

Depending on how long and complex your research is, you may not be able to include all results here. Try to highlight only the most important findings that will allow the reader to understand your conclusions.

Finally, you should discuss the main conclusions of your research : what is your answer to the problem or question? The reader should finish with a clear understanding of the central point that your research has proved or argued. Conclusions are usually written in the present simple tense.

• We concluded that coffee consumption increases productivity.
• We conclude that coffee consumption increases productivity.

If there are important limitations to your research (for example, related to your sample size or methods), you should mention them briefly in the abstract. This allows the reader to accurately assess the credibility and generalisability of your research.

If your aim was to solve a practical problem, your discussion might include recommendations for implementation. If relevant, you can briefly make suggestions for further research.

If your paper will be published, you might have to add a list of keywords at the end of the abstract. These keywords should reference the most important elements of the research to help potential readers find your paper during their own literature searches.

Be aware that some publication manuals, such as APA Style , have specific formatting requirements for these keywords.

It can be a real challenge to condense your whole work into just a couple of hundred words, but the abstract will be the first (and sometimes only) part that people read, so it’s important to get it right. These strategies can help you get started.

Read other abstracts

The best way to learn the conventions of writing an abstract in your discipline is to read other people’s. You probably already read lots of journal article abstracts while conducting your literature review —try using them as a framework for structure and style.

You can also find lots of dissertation abstract examples in thesis and dissertation databases .

Reverse outline

Not all abstracts will contain precisely the same elements. For longer works, you can write your abstract through a process of reverse outlining.

For each chapter or section, list keywords and draft one to two sentences that summarise the central point or argument. This will give you a framework of your abstract’s structure. Next, revise the sentences to make connections and show how the argument develops.

Write clearly and concisely

A good abstract is short but impactful, so make sure every word counts. Each sentence should clearly communicate one main point.

To keep your abstract or summary short and clear:

• Avoid passive sentences: Passive constructions are often unnecessarily long. You can easily make them shorter and clearer by using the active voice.
• Avoid long sentences: Substitute longer expressions for concise expressions or single words (e.g., “In order to” for “To”).
• Avoid obscure jargon: The abstract should be understandable to readers who are not familiar with your topic.
• Avoid repetition and filler words: Replace nouns with pronouns when possible and eliminate unnecessary words.
• Avoid detailed descriptions: An abstract is not expected to provide detailed definitions, background information, or discussions of other scholars’ work. Instead, include this information in the body of your thesis or paper.

If you’re struggling to edit down to the required length, you can get help from expert editors with Scribbr’s professional proofreading services .

Check your formatting

If you are writing a thesis or dissertation or submitting to a journal, there are often specific formatting requirements for the abstract—make sure to check the guidelines and format your work correctly. For APA research papers you can follow the APA abstract format .

Checklist: Abstract

The word count is within the required length, or a maximum of one page.

The abstract appears after the title page and acknowledgements and before the table of contents .

I have clearly stated my research problem and objectives.

I have briefly described my methodology .

I have summarized the most important results .

I have stated my main conclusions .

I have mentioned any important limitations and recommendations.

The abstract can be understood by someone without prior knowledge of the topic.

You've written a great abstract! Use the other checklists to continue improving your thesis or dissertation.

An abstract is a concise summary of an academic text (such as a journal article or dissertation ). It serves two main purposes:

• To help potential readers determine the relevance of your paper for their own research.
• To communicate your key findings to those who don’t have time to read the whole paper.

Abstracts are often indexed along with keywords on academic databases, so they make your work more easily findable. Since the abstract is the first thing any reader sees, it’s important that it clearly and accurately summarises the contents of your paper.

An abstract for a thesis or dissertation is usually around 150–300 words. There’s often a strict word limit, so make sure to check your university’s requirements.

The abstract is the very last thing you write. You should only write it after your research is complete, so that you can accurately summarize the entirety of your thesis or paper.

Avoid citing sources in your abstract . There are two reasons for this:

• The abstract should focus on your original research, not on the work of others.
• The abstract should be self-contained and fully understandable without reference to other sources.

There are some circumstances where you might need to mention other sources in an abstract: for example, if your research responds directly to another study or focuses on the work of a single theorist. In general, though, don’t include citations unless absolutely necessary.

The abstract appears on its own page, after the title page and acknowledgements but before the table of contents .

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

McCombes, S. (2022, October 10). How to Write an Abstract | Steps & Examples. Scribbr. Retrieved 12 August 2024, from https://www.scribbr.co.uk/thesis-dissertation/abstract/

Is this article helpful?

Shona McCombes

Other students also liked, how to write a thesis or dissertation introduction, thesis & dissertation acknowledgements | tips & examples, dissertation title page.

• How to Write an Abstract for a Dissertation

Written by Hannah Slack

Every PhD student will have to write an abstract. Whether it’s for a conference paper , journal article or your thesis , the abstract is an important part for many academic activities. Although only a single short paragraph, writing one effectively takes practice.

This page will take you through what a dissertation abstract is, why it’s so important and how to write one.

On this page

What is an academic abstract.

An academic abstract is a short and concise summary of research . It should cover the aim or research question of your work, your methodology, results and the wider implications of your conclusions. All this needs to be covered in around 200-300 words .

One of the common mistakes people make when writing abstracts is not understanding their purpose. An abstract is not for the author, it’s for the reader . To summarise your research, as the person who knows it best, may seem easy. But to be able to communicate the complexities and importance of your work to someone else, likely outside of your field, can be difficult.

When will I need to write an academic abstract?

There are many different places that you’ll find abstracts. Some of the most common ones include:

• Grant and funding applications
• Journal articles
• Conference applications
• Conference proceedings

This guide primarily focuses on the dissertation abstract, which is the most common form of this kind of text.

What’s the difference between an abstract and an introduction?

The main differences between a PhD dissertation abstract and an introduction are the purpose and the length. An abstract is a short, paragraph-sized summary of the whole thesis, covering context, your research and results. Whereas an introduction should be much longer and only cover the context of your work. An introduction is designed to explain the background of your work and so will take up at least an entire page.

Why are abstracts important?

Abstracts are important because they are a quick and easy way to communicate your work. In many ways, academic abstracts are a promotional tool and so should be considered carefully.

For your thesis, it’s the first thing your examiners will read, forming their expectations for the rest of the dissertation.

In journal articles, their purpose is to convince the reader that they should read your article. If you’re applying for a conference, the abstract gives the organiser a taster of your paper so they can decide whether it’s suitable.

Effectively, your abstract is the first impression someone gets of your research and so it’s important to put your best foot forward.

How to write a PhD abstract

How you write a dissertation abstract will largely depend on what it’s for. For a PhD dissertation or journal article, you should have already written up the research which the abstract will summarise. You should focus on making sure your summary is an honest representation of the larger written work. However, for a conference application it’s likely you won’t yet have written the paper. In this instance, the abstract might focus more on the broader themes you intend to comment on and your methodology.

Whatever the intended purpose, all abstracts should broadly follow the same structure. To help you, we’ve put together a template to make sure you include all the important points.

PhD abstract format

Because a lot of information needs to be packed into a short paragraph, an abstract is easier to write when you break it down into the key elements. For a first draft, spend a few minutes on each of the six steps, only writing down one or two sentences.

• Rationale – Ask yourself why you are researching the topic and what is the context for your work. Here you should communicate the purpose of your study within the wider field.
• Research question – Now you should specify what the exact goal of this piece of research is. What question are you providing the answer for?
• Evidence and methods – After discussing the broader purpose of your work you now need to let the reader know what you have actually done. Try to summarise your methods and evidence with a few keywords to keep if brief. Some examples include qualitative, quantitative, archival or experimental.
• Results – Here, you should summarise your outcomes and highlight what is new or significant about your findings.
• Conclusion – The conclusion should relate back to your rationale and research question. Ask yourself, ‘what do the results mean?’
• Implications and applications – Lastly, the reader needs to know why your results are important to the field. You need to specify what is significant about this work and how it can be useful.

Once you have your framework it can be edited for a more natural flow. You may find that some points naturally merge into one sentence and others need some elaboration. But remember, the abstract must be short and concise so don’t be tempted to extend areas unnecessarily. Once you have a draft that you are happy with, consider asking for feedback from other PhD students or your supervisor.

Doing a PhD

For more information on trhe different stages of a doctorate, check out our guide to the PhD journey .

Ready to do a PhD?

Search our project listings to find out what you could be studying.

Want More Updates & Advice?

What happens during a typical PhD, and when? We've summarised the main milestones of a doctoral research journey.

The PhD thesis is the most important part of a doctoral degree. This page will introduce you to what you need to know about the PhD dissertation.

This page will give you an idea of what to expect from your routine as a PhD student, explaining how your daily life will look at you progress through a doctoral degree.

Our guide tells you everything about the application process for studying a PhD in the USA.

Postgraduate students in the UK are not eligible for the same funding as undergraduates or the free-hours entitlement for workers. So, what childcare support are postgraduate students eligible for?

The UK education system is divided into levels. This guide is your one-stop overview into what these levels are and what they mean for postgraduate students.

FindAPhD. Copyright 2005-2024 All rights reserved.

Unknown    ( change )

Have you got time to answer some quick questions about PhD study?

Select your nearest city

You haven’t completed your profile yet. To get the most out of FindAPhD, finish your profile and receive these benefits:

• Monthly chance to win one of ten £10 Amazon vouchers ; winners will be notified every month.*
• The latest PhD projects delivered straight to your inbox
• Access to our £6,000 scholarship competition
• Weekly newsletter with funding opportunities, research proposal tips and much more
• Early access to our physical and virtual postgraduate study fairs

Or begin browsing FindAPhD.com

or begin browsing FindAPhD.com

*Offer only available for the duration of your active subscription, and subject to change. You MUST claim your prize within 72 hours, if not we will redraw.

Do you want hassle-free information and advice?

Create your FindAPhD account and sign up to our newsletter:

• Find out about funding opportunities and application tips
• Receive weekly advice, student stories and the latest PhD news
• Hear about our upcoming study fairs
• Save your favourite projects, track enquiries and get personalised subject updates

Create your account

Looking to list your PhD opportunities? Log in here .

• Our Mission
• Code of Conduct
• The Consultants
• Hours and Locations
• Apply to Become a Consultant
• Make an Appointment
• Face-to-Face Appointments
• Zoom Appointments
• Written Feedback Appointments
• Support for Writers with Disabilities
• Policies and Restrictions
• Upcoming Workshops
• Class Workshops
• Meet the Consultants
• Writing Guides and Tools
• Login or Register
• Graduate Writing Consultations
• Thesis and Dissertation Consultations
• Weekly Write-Ins
• ESOL Graduate Peer Feedback Groups
• Setting Up Your Own Writing Group
• Writing Resources for Graduate Students
• Support for Multilingual Students
• ESOL Opt-In Program
• About Our Consulting Services
• Promote Us to Your Students
• Recommend Consultants

Writing an Abstract

What is an abstract.

An abstract is a 150- to 250-word paragraph that provides readers with a quick overview of your essay or report and its organization. It should express your thesis (or central idea) and your key points; it should also suggest any implications or applications of the research you discuss in the paper.

According to Carole Slade, an abstract is “a concise summary of the entire paper.”

The function of an abstract is to describe, not to evaluate or defend, the paper.

The abstract should begin with a brief but precise statement of the problem or issue, followed by a description of the research method and design, the major findings, and the conclusions reached.

The abstract should contain the most important key words referring to method and content: these facilitate access to the abstract by computer search and enable a reader to decide whether to read the entire dissertation.

Note: Your abstract should read like an overview of your paper, not a proposal for what you intended to study or accomplish. Avoid beginning your sentences with phrases like, “This essay will examine...” or “In this research paper I will attempt to prove...”  

(The examples above are taken from Form and Style (10th ed.), by Carole Slade; The Scott, Foresman Handbook for Writers (5th ed.); and the Publication Manual of the American Psychological Association (5th ed.).)

Note: The following are specifications for an abstract in APA style, used in the social sciences, such as psychology or anthropology. If you are in another discipline, check with your professor about the format for the abstract.

Writing an Abstract for an IMRaD Paper

Many papers in the social sciences, natural sciences, and engineering sciences follow IMRaD structure: their main sections are entitled Introduction, Methods, Results, and Discussion. People use the abstract to decide whether to read the rest of the paper, so the abstract for such a paper is important.

Because the abstract provides the highlights of the paper, you should draft your abstract after you have written a full draft of the paper. Doing so, you can summarize what you’ve already written in the paper as you compose the abstract.

Typically, an abstract for an IMRaD paper or presentation is one or two paragraphs long (120 – 500 words). Abstracts usually spend

25% of their space on the purpose and importance of the research (Introduction)

25% of their space on what you did (Methods)

35% of their space on what you found (Results)

15% of their space on the implications of the research

Sample IMRaD abstract:

Try to avoid these common problems in IMRaD abstracts:

1. The abstract provides a statement of what the paper will ask or explore rather than what it found:

X This report examines the causes of oversleeping. (What did it find out about these causes?) √ Individuals oversleep because they go to bed too late, forget to set their alarms, and keep their rooms dark.

2. The abstract provides general categories rather than specific details in the findings:

X The study draws conclusions about which variables are most important in choosing a movie theater. (What, specifically, are these variables?)

√ The study concludes that the most important variables in choosing a movie theater are comfortable seats and high-quality popcorn.

The Writing Center

4400 University Drive, 2G8 Fairfax, VA 22030

• Johnson Center, Room 227E
• +1-703-993-1200
• [email protected]

Quick Links

• Register with us

© Copyright 2024 George Mason University . All Rights Reserved. Privacy Statement | Accessibility

Reference management. Clean and simple.

How to write an abstract

What is an abstract?

General format of an abstract, the content of an abstract, abstract example, abstract style guides, frequently asked questions about writing an abstract, related articles.

An abstract is a summary of the main contents of a paper.

The abstract is the first glimpse that readers get of the content of a research paper. It can influence the popularity of a paper, as a well-written one will attract readers, and a poorly-written one will drive them away.

➡️ Different types of papers may require distinct abstract styles. Visit our guide on the different types of research papers to learn more.

Tip: Always wait until you’ve written your entire paper before you write the abstract.

Before you actually start writing an abstract, make sure to follow these steps:

• Read other papers : find papers with similar topics, or similar methodologies, simply to have an idea of how others have written their abstracts. Notice which points they decided to include, and how in depth they described them.
• Double check the journal requirements : always make sure to review the journal guidelines to format your paper accordingly. Usually, they also specify abstract's formats.
• Write the abstract after you finish writing the paper : you can only write an abstract once you finish writing the whole paper. This way you can include all important aspects, such as scope, methodology, and conclusion.

➡️ Read more about  what is a research methodology?

The general format of an abstract includes the following features:

• Between 150-300 words .
• An independent page , after the title page and before the table of contents.
• Concise summary including the aim of the research, methodology , and conclusion .
• Keywords describing the content.

As mentioned before, an abstract is a text that summarizes the main points of a research. Here is a break down of each element that should be included in an abstract:

• Purpose : every abstract should start by describing the main purpose or aim of the research.
• Methods : as a second point, the methodology carried out should be explained.
• Results : then, a concise summary of the results should be included.
• Conclusion : finally, a short outline of the general outcome of the research should be given.
• Keywords : along with the abstract, specific words and phrases related to the topics discussed in the research should be added. These words are usually around five, but the number can vary depending on the journal's guidelines.

This abstract, taken from ScienceDirect , illustrates the ideal structure of an abstract. It has 155 words, it's concise, and it clearly shows the division of elements necessary to write a successful abstract.

This paper explores the implicit assumption in the growing body of literature that social media usage is fundamentally different in business-to-business (B2B) companies than in the extant business-to-consumer (B2C) literature. Sashi's (2012) customer engagement cycle is utilized to compare organizational practices in relation to social media marketing in B2B, B2C, Mixed B2B/B2C and B2B2C business models. Utilizing 449 responses to an exploratory panel based survey instrument, we clearly identify differences in social media usage and its perceived importance as a communications channel. In particular we identify distinct differences in the relationship between social media importance and the perceived effectiveness of social media marketing across business models. Our results indicate that B2B social media usage is distinct from B2C, Mixed and B2B2C business model approaches. Specifically B2B organizational members perceive social media to have a lower overall effectiveness as a channel and identify it as less important for relationship oriented usage than other business models.

The exact format of an abstract depends on the citation style you implement. Whether it’s a well-known style (like APA, IEEE, etc.) or a journal's style, each format has its own guidelines, so make sure you know which style you are using before writing your abstract.

APA is one of the most commonly used styles to format an abstract. Therefore, we created a guide with exact instructions on how to write an abstract in APA style, and a template to download:

📕 APA abstract page: format and template

Additionally, you will find below an IEEE and ASA abstract guide by Purdue Online Writing Lab :

📗 IEEE General Format - Abstract

📘 ASA Manuscript Formatting - Abstract

No. You should always write an abstract once you finish writing the whole paper. This way you can include all important aspects of the paper, such as scope, methodology, and conclusion.

The length of an abstract depends on the formatting style of the paper. For example, APA style calls for 150 to 250 words. Generally, you need between 150-300 words.

No. An abstract has an independent section after the title page and before the table of contents, and should not be included in the table of contents.

Take a look at APA abstract page: format and template for exact details on how to format an abstract in APA style.

You can access any paper through Google Scholar or any other search engine; pick a paper and read the abstract. Abstracts are always freely available to read.

Writing an Abstract for Your Research Paper

Definition and Purpose of Abstracts

An abstract is a short summary of your (published or unpublished) research paper, usually about a paragraph (c. 6-7 sentences, 150-250 words) long. A well-written abstract serves multiple purposes:

• an abstract lets readers get the gist or essence of your paper or article quickly, in order to decide whether to read the full paper;
• an abstract prepares readers to follow the detailed information, analyses, and arguments in your full paper;
• and, later, an abstract helps readers remember key points from your paper.

It’s also worth remembering that search engines and bibliographic databases use abstracts, as well as the title, to identify key terms for indexing your published paper. So what you include in your abstract and in your title are crucial for helping other researchers find your paper or article.

If you are writing an abstract for a course paper, your professor may give you specific guidelines for what to include and how to organize your abstract. Similarly, academic journals often have specific requirements for abstracts. So in addition to following the advice on this page, you should be sure to look for and follow any guidelines from the course or journal you’re writing for.

The Contents of an Abstract

Abstracts contain most of the following kinds of information in brief form. The body of your paper will, of course, develop and explain these ideas much more fully. As you will see in the samples below, the proportion of your abstract that you devote to each kind of information—and the sequence of that information—will vary, depending on the nature and genre of the paper that you are summarizing in your abstract. And in some cases, some of this information is implied, rather than stated explicitly. The Publication Manual of the American Psychological Association , which is widely used in the social sciences, gives specific guidelines for what to include in the abstract for different kinds of papers—for empirical studies, literature reviews or meta-analyses, theoretical papers, methodological papers, and case studies.

Here are the typical kinds of information found in most abstracts:

• the context or background information for your research; the general topic under study; the specific topic of your research
• the central questions or statement of the problem your research addresses
• what’s already known about this question, what previous research has done or shown
• the main reason(s) , the exigency, the rationale , the goals for your research—Why is it important to address these questions? Are you, for example, examining a new topic? Why is that topic worth examining? Are you filling a gap in previous research? Applying new methods to take a fresh look at existing ideas or data? Resolving a dispute within the literature in your field? . . .
• your research and/or analytical methods
• your main findings , results , or arguments
• the significance or implications of your findings or arguments.

Your abstract should be intelligible on its own, without a reader’s having to read your entire paper. And in an abstract, you usually do not cite references—most of your abstract will describe what you have studied in your research and what you have found and what you argue in your paper. In the body of your paper, you will cite the specific literature that informs your research.

When to Write Your Abstract

Although you might be tempted to write your abstract first because it will appear as the very first part of your paper, it’s a good idea to wait to write your abstract until after you’ve drafted your full paper, so that you know what you’re summarizing.

What follows are some sample abstracts in published papers or articles, all written by faculty at UW-Madison who come from a variety of disciplines. We have annotated these samples to help you see the work that these authors are doing within their abstracts.

Choosing Verb Tenses within Your Abstract

The social science sample (Sample 1) below uses the present tense to describe general facts and interpretations that have been and are currently true, including the prevailing explanation for the social phenomenon under study. That abstract also uses the present tense to describe the methods, the findings, the arguments, and the implications of the findings from their new research study. The authors use the past tense to describe previous research.

The humanities sample (Sample 2) below uses the past tense to describe completed events in the past (the texts created in the pulp fiction industry in the 1970s and 80s) and uses the present tense to describe what is happening in those texts, to explain the significance or meaning of those texts, and to describe the arguments presented in the article.

The science samples (Samples 3 and 4) below use the past tense to describe what previous research studies have done and the research the authors have conducted, the methods they have followed, and what they have found. In their rationale or justification for their research (what remains to be done), they use the present tense. They also use the present tense to introduce their study (in Sample 3, “Here we report . . .”) and to explain the significance of their study (In Sample 3, This reprogramming . . . “provides a scalable cell source for. . .”).

Sample Abstract 1

From the social sciences.

Reporting new findings about the reasons for increasing economic homogamy among spouses

Gonalons-Pons, Pilar, and Christine R. Schwartz. “Trends in Economic Homogamy: Changes in Assortative Mating or the Division of Labor in Marriage?” Demography , vol. 54, no. 3, 2017, pp. 985-1005.

Sample Abstract 2

From the humanities.

Analyzing underground pulp fiction publications in Tanzania, this article makes an argument about the cultural significance of those publications

Emily Callaci. “Street Textuality: Socialism, Masculinity, and Urban Belonging in Tanzania’s Pulp Fiction Publishing Industry, 1975-1985.” Comparative Studies in Society and History , vol. 59, no. 1, 2017, pp. 183-210.

Sample Abstract/Summary 3

From the sciences.

Reporting a new method for reprogramming adult mouse fibroblasts into induced cardiac progenitor cells

Lalit, Pratik A., Max R. Salick, Daryl O. Nelson, Jayne M. Squirrell, Christina M. Shafer, Neel G. Patel, Imaan Saeed, Eric G. Schmuck, Yogananda S. Markandeya, Rachel Wong, Martin R. Lea, Kevin W. Eliceiri, Timothy A. Hacker, Wendy C. Crone, Michael Kyba, Daniel J. Garry, Ron Stewart, James A. Thomson, Karen M. Downs, Gary E. Lyons, and Timothy J. Kamp. “Lineage Reprogramming of Fibroblasts into Proliferative Induced Cardiac Progenitor Cells by Defined Factors.” Cell Stem Cell , vol. 18, 2016, pp. 354-367.

Sample Abstract 4, a Structured Abstract

Reporting results about the effectiveness of antibiotic therapy in managing acute bacterial sinusitis, from a rigorously controlled study

Note: This journal requires authors to organize their abstract into four specific sections, with strict word limits. Because the headings for this structured abstract are self-explanatory, we have chosen not to add annotations to this sample abstract.

Wald, Ellen R., David Nash, and Jens Eickhoff. “Effectiveness of Amoxicillin/Clavulanate Potassium in the Treatment of Acute Bacterial Sinusitis in Children.” Pediatrics , vol. 124, no. 1, 2009, pp. 9-15.

“OBJECTIVE: The role of antibiotic therapy in managing acute bacterial sinusitis (ABS) in children is controversial. The purpose of this study was to determine the effectiveness of high-dose amoxicillin/potassium clavulanate in the treatment of children diagnosed with ABS.

METHODS : This was a randomized, double-blind, placebo-controlled study. Children 1 to 10 years of age with a clinical presentation compatible with ABS were eligible for participation. Patients were stratified according to age (<6 or ≥6 years) and clinical severity and randomly assigned to receive either amoxicillin (90 mg/kg) with potassium clavulanate (6.4 mg/kg) or placebo. A symptom survey was performed on days 0, 1, 2, 3, 5, 7, 10, 20, and 30. Patients were examined on day 14. Children’s conditions were rated as cured, improved, or failed according to scoring rules.

RESULTS: Two thousand one hundred thirty-five children with respiratory complaints were screened for enrollment; 139 (6.5%) had ABS. Fifty-eight patients were enrolled, and 56 were randomly assigned. The mean age was 6630 months. Fifty (89%) patients presented with persistent symptoms, and 6 (11%) presented with nonpersistent symptoms. In 24 (43%) children, the illness was classified as mild, whereas in the remaining 32 (57%) children it was severe. Of the 28 children who received the antibiotic, 14 (50%) were cured, 4 (14%) were improved, 4(14%) experienced treatment failure, and 6 (21%) withdrew. Of the 28children who received placebo, 4 (14%) were cured, 5 (18%) improved, and 19 (68%) experienced treatment failure. Children receiving the antibiotic were more likely to be cured (50% vs 14%) and less likely to have treatment failure (14% vs 68%) than children receiving the placebo.

CONCLUSIONS : ABS is a common complication of viral upper respiratory infections. Amoxicillin/potassium clavulanate results in significantly more cures and fewer failures than placebo, according to parental report of time to resolution.” (9)

Some Excellent Advice about Writing Abstracts for Basic Science Research Papers, by Professor Adriano Aguzzi from the Institute of Neuropathology at the University of Zurich:

Academic and Professional Writing

This is an accordion element with a series of buttons that open and close related content panels.

Analysis Papers

Reading Poetry

A Short Guide to Close Reading for Literary Analysis

Using Literary Quotations

Play Reviews

Writing a Rhetorical Précis to Analyze Nonfiction Texts

Incorporating Interview Data

Grant Proposals

Planning and Writing a Grant Proposal: The Basics

Additional Resources for Grants and Proposal Writing

Job Materials and Application Essays

Writing Personal Statements for Ph.D. Programs

• Before you begin: useful tips for writing your essay
• Guided brainstorming exercises
• Get more help with your essay
• Frequently Asked Questions

Resume Writing Tips

CV Writing Tips

Cover Letters

Business Letters

Proposals and Dissertations

Resources for Proposal Writers

Resources for Dissertators

Research Papers

Planning and Writing Research Papers

Quoting and Paraphrasing

Writing Annotated Bibliographies

Creating Poster Presentations

Thank-You Notes

Advice for Students Writing Thank-You Notes to Donors

Reading for a Review

Critical Reviews

Writing a Review of Literature

Scientific Reports

Scientific Report Format

Sample Lab Assignment

Writing for the Web

Writing an Effective Blog Post

Writing for Social Media: A Guide for Academics

How to Write an Abstract for a Dissertation

At roughly 200 words, the abstract is the shortest part of the dissertation! Thankfully, it’s also one of the simplest to write – as long as you approach it sensibly…

The cardinal rule for writing an abstract is to leave it ‘til last. After all, the abstract is a summary of the entire dissertation, so it makes sense to leave it until the end.

Having said that, it’s a good idea to prepare yourself. If you learn how to write an abstract well ahead of time, there’ll be no last-minute panics. With that in mind, let’s run through the basics of writing a dissertation abstract.

What is the purpose of an abstract?

As mentioned, the abstract is essentially a summary of your dissertation. Think of it like a film synopsis or a book blurb. In roughly 200 words, it should tell the reader exactly what to expect from reading your dissertation.

A good abstract will also hint at the relevance and usefulness of the project. Indeed, in many ways, the abstract is an opportunity for you to ‘sell’ your project to the reader. The more compelling the abstract is, the more likely they are to read your dissertation.

What should an abstract include?

Later on, we’ll show you exactly how to structure an abstract. But first, it’s important to understand the elements of an abstract. In brief, an abstract should:

• Intrigue – In the first few sentences, you should introduce your topic to the reader, and highlight a key debate or issue that inspired the dissertation. If you can intrigue your reader in the opening sentence, they’re much more likely to continue reading!
• Convince – You’ll then need to convince your reader that your dissertation is necessary and worthwhile. Often, this is achieved by explaining how your dissertation extends or challenges the existing literature.
• Describe – You should describe the research methods very briefly but accurately.
• Inform – The abstract should be informative, particularly in relation to the findings of the study. It is not necessary to state all the findings, but you should highlight the key insights.
• Demonstrate relevance and usefulness – As mentioned, a good abstract finishes by saying who will find this research useful and why. Occasionally, it may also suggest directions for future research.

Remember, since the abstract is a summary of a project you’ve completed, it should be written in the present or past simple tense .

How should you structure an abstract?

The structure of an abstract can vary depending on the subject you are studying at university. Also, some universities have specific guidelines for writing an abstract, so always check with your tutor first. In particular, APA style has quite specific rules for formatting an abstract.

Though, generally speaking, the following structure is a good starting point for students in most subject areas:

1. Provide some background

The first 1-2 sentences should provide a very brief background to your topic of study. Remember, the aim is to intrigue here. These sentences are usually written in the present tense.

2. Refer to existing debates

Next, you should briefly explain the existing theory/research that has informed your chosen topic. If there are any key debates relevant to your topic, briefly mention them here. Try to limit this to 1-2 sentences and stick with the present or past tense.

3. Explain why the dissertation was worthwhile

In the next sentence or two, you’ll need to convince your reader that this study was worthwhile. Try to use the previous few sentences as a springboard, but explain why your study was unique.

4. State your research question

If it was not stated in the last section, the next sentence should clearly state your research question. You may have had more than one research question/research aim, but try to be as succinct as possible here.

5. State the methodology

In this sentence, you should clearly describe the methodology used . There is no need to explain why this method was chosen; just be as precise and succinct as possible.

6. State the key findings

The next sentence should explain the findings of your dissertation. Try not to be too technical here as your reader may be a novice. Also, there probably won’t be space to state all your findings, so present the ones that are most relevant and interesting. In fact, leaving a bit to the imagination is a good thing because it should intrigue the reader…

7. State who will find this research useful and why

In the last sentence, you should explain the usefulness and relevance of your dissertation. Consider: Who will benefit from this research? Does it have any practical applications?

8. List of keywords

Depending on your subject, you may be expected to provide a short list of keywords. This is common in Psychology research, for example. Check with your tutor if keywords are necessary. Remember, these should be listed in alphabetical order underneath the body of the abstract.

What’s the secret to writing a great abstract?

So, we’ve covered the basics of writing an abstract, but how can you write a first-class dissertation abstract? Well, we have two pieces of advice.

Firstly, be precise and succinct. Once you’ve written your abstract, you should set it aside for at least 24 hours, and then return to it with fresh eyes. As you read through it, cut out anything that’s not absolutely essential. Also, consider rewording sentences so that they are clear and readable. You can use our disseration writing services to help you with this.

Secondly, when you reveal your findings, try to find the right balance between revealing too much and revealing too little. It’s important to demonstrate that your study was interesting and relevant, but if you reveal too much, the reader may not want to bother reading your dissertation.

Indeed, writing a good dissertation is all about taking your reader on a journey and building momentum as you go. If you can manage this, you’ll keep your reader’s attention until the very last page! Creating this balance is not easy but it is a skill that can be developed through practice.

Common mistakes to avoid

So, we’ve reviewed the components of a good dissertation abstract. But what constitutes a bad abstract? Let’s finish by exploring some of the common mistakes students make when writing an abstract:

• Too long – Generally speaking, an abstract should be between 150 and 250 words, and it should fit on one page. If you make it too long, it won’t be compelling, and it’ll probably just confuse the reader.
• Lack of relevant keywords in the body of the abstract – Although an abstract should be written in reasonably non-technical language, it should include some relevant keywords. E.g. In the above example “Green marketing” and “Green purchasing behaviour” were pertinent keywords. Using appropriate keywords shows you’ve done wider reading and you understand where your project ‘fits in’ to the literature. Also, if your research were to be published, keywords would help other researchers to find it.
• Written in the wrong tense – A common mistake students make is that they write their abstract in the future tense (I.e. “This dissertation will explore the relationship between…”). The research has already been conducted, so it should be written in the past tense.
• Wrong positioning – The abstract should go after the title page and before the contents page.
• References and quotes – Generally speaking, an abstract should not contain references or quotations from other theorists. The only exception might be if your dissertation was solely focused on one particular theory/debate. In that case, keep quotes and references to an absolute minimum – your introduction and literature review will provide a comprehensive description of the theory!

You may also like

• Resources Home 🏠
• Try SciSpace Copilot
• Search research papers
• Add Copilot Extension
• Try AI Detector
• Try Paraphraser
• Try Citation Generator
• April Papers
• June Papers
• July Papers

Abstract Writing: A Step-by-Step Guide With Tips & Examples

Table of Contents

Introduction

Abstracts of research papers have always played an essential role in describing your research concisely and clearly to researchers and editors of journals, enticing them to continue reading. However, with the widespread availability of scientific databases, the need to write a convincing abstract is more crucial now than during the time of paper-bound manuscripts.

Abstracts serve to "sell" your research and can be compared with your "executive outline" of a resume or, rather, a formal summary of the critical aspects of your work. Also, it can be the "gist" of your study. Since most educational research is done online, it's a sign that you have a shorter time for impressing your readers, and have more competition from other abstracts that are available to be read.

The APCI (Academic Publishing and Conferences International) articulates 12 issues or points considered during the final approval process for conferences & journals and emphasises the importance of writing an abstract that checks all these boxes (12 points). Since it's the only opportunity you have to captivate your readers, you must invest time and effort in creating an abstract that accurately reflects the critical points of your research.

With that in mind, let’s head over to understand and discover the core concept and guidelines to create a substantial abstract. Also, learn how to organise the ideas or plots into an effective abstract that will be awe-inspiring to the readers you want to reach.

What is Abstract? Definition and Overview

The word "Abstract' is derived from Latin abstractus meaning "drawn off." This etymological meaning also applies to art movements as well as music, like abstract expressionism. In this context, it refers to the revealing of the artist's intention.

Based on this, you can determine the meaning of an abstract: A condensed research summary. It must be self-contained and independent of the body of the research. However, it should outline the subject, the strategies used to study the problem, and the methods implemented to attain the outcomes. The specific elements of the study differ based on the area of study; however, together, it must be a succinct summary of the entire research paper.

Abstracts are typically written at the end of the paper, even though it serves as a prologue. In general, the abstract must be in a position to:

• Describe the paper.
• Identify the problem or the issue at hand.
• Explain to the reader the research process, the results you came up with, and what conclusion you've reached using these results.
• Include keywords to guide your strategy and the content.

Furthermore, the abstract you submit should not reflect upon any of  the following elements:

• Examine, analyse or defend the paper or your opinion.
• What you want to study, achieve or discover.
• Be redundant or irrelevant.

After reading an abstract, your audience should understand the reason - what the research was about in the first place, what the study has revealed and how it can be utilised or can be used to benefit others. You can understand the importance of abstract by knowing the fact that the abstract is the most frequently read portion of any research paper. In simpler terms, it should contain all the main points of the research paper.

What is the Purpose of an Abstract?

Abstracts are typically an essential requirement for research papers; however, it's not an obligation to preserve traditional reasons without any purpose. Abstracts allow readers to scan the text to determine whether it is relevant to their research or studies. The abstract allows other researchers to decide if your research paper can provide them with some additional information. A good abstract paves the interest of the audience to pore through your entire paper to find the content or context they're searching for.

Abstract writing is essential for indexing, as well. The Digital Repository of academic papers makes use of abstracts to index the entire content of academic research papers. Like meta descriptions in the regular Google outcomes, abstracts must include keywords that help researchers locate what they seek.

Types of Abstract

Informative and Descriptive are two kinds of abstracts often used in scientific writing.

A descriptive abstract gives readers an outline of the author's main points in their study. The reader can determine if they want to stick to the research work, based on their interest in the topic. An abstract that is descriptive is similar to the contents table of books, however, the format of an abstract depicts complete sentences encapsulated in one paragraph. It is unfortunate that the abstract can't be used as a substitute for reading a piece of writing because it's just an overview, which omits readers from getting an entire view. Also, it cannot be a way to fill in the gaps the reader may have after reading this kind of abstract since it does not contain crucial information needed to evaluate the article.

To conclude, a descriptive abstract is:

• A simple summary of the task, just summarises the work, but some researchers think it is much more of an outline
• Typically, the length is approximately 100 words. It is too short when compared to an informative abstract.
• A brief explanation but doesn't provide the reader with the complete information they need;
• An overview that omits conclusions and results

An informative abstract is a comprehensive outline of the research. There are times when people rely on the abstract as an information source. And the reason is why it is crucial to provide entire data of particular research. A well-written, informative abstract could be a good substitute for the remainder of the paper on its own.

A well-written abstract typically follows a particular style. The author begins by providing the identifying information, backed by citations and other identifiers of the papers. Then, the major elements are summarised to make the reader aware of the study. It is followed by the methodology and all-important findings from the study. The conclusion then presents study results and ends the abstract with a comprehensive summary.

In a nutshell, an informative abstract:

• Has a length that can vary, based on the subject, but is not longer than 300 words.
• Contains all the content-like methods and intentions
• Offers evidence and possible recommendations.

Informative Abstracts are more frequent than descriptive abstracts because of their extensive content and linkage to the topic specifically. You should select different types of abstracts to papers based on their length: informative abstracts for extended and more complex abstracts and descriptive ones for simpler and shorter research papers.

What are the Characteristics of a Good Abstract?

• A good abstract clearly defines the goals and purposes of the study.
• It should clearly describe the research methodology with a primary focus on data gathering, processing, and subsequent analysis.
• A good abstract should provide specific research findings.
• It presents the principal conclusions of the systematic study.
• It should be concise, clear, and relevant to the field of study.
• A well-designed abstract should be unifying and coherent.
• It is easy to grasp and free of technical jargon.
• It is written impartially and objectively.

What are the various sections of an ideal Abstract?

By now, you must have gained some concrete idea of the essential elements that your abstract needs to convey . Accordingly, the information is broken down into six key sections of the abstract, which include:

An Introduction or Background

Research methodology, objectives and goals, limitations.

Let's go over them in detail.

The introduction, also known as background, is the most concise part of your abstract. Ideally, it comprises a couple of sentences. Some researchers only write one sentence to introduce their abstract. The idea behind this is to guide readers through the key factors that led to your study.

It's understandable that this information might seem difficult to explain in a couple of sentences. For example, think about the following two questions like the background of your study:

• What is currently available about the subject with respect to the paper being discussed?
• What isn't understood about this issue? (This is the subject of your research)

While writing the abstract’s introduction, make sure that it is not lengthy. Because if it crosses the word limit, it may eat up the words meant to be used for providing other key information.

Research methodology is where you describe the theories and techniques you used in your research. It is recommended that you describe what you have done and the method you used to get your thorough investigation results. Certainly, it is the second-longest paragraph in the abstract.

In the research methodology section, it is essential to mention the kind of research you conducted; for instance, qualitative research or quantitative research (this will guide your research methodology too) . If you've conducted quantitative research, your abstract should contain information like the sample size, data collection method, sampling techniques, and duration of the study. Likewise, your abstract should reflect observational data, opinions, questionnaires (especially the non-numerical data) if you work on qualitative research.

The research objectives and goals speak about what you intend to accomplish with your research. The majority of research projects focus on the long-term effects of a project, and the goals focus on the immediate, short-term outcomes of the research. It is possible to summarise both in just multiple sentences.

In stating your objectives and goals, you give readers a picture of the scope of the study, its depth and the direction your research ultimately follows. Your readers can evaluate the results of your research against the goals and stated objectives to determine if you have achieved the goal of your research.

In the end, your readers are more attracted by the results you've obtained through your study. Therefore, you must take the time to explain each relevant result and explain how they impact your research. The results section exists as the longest in your abstract, and nothing should diminish its reach or quality.

One of the most important things you should adhere to is to spell out details and figures on the results of your research.

Instead of making a vague assertion such as, "We noticed that response rates varied greatly between respondents with high incomes and those with low incomes", Try these: "The response rate was higher for high-income respondents than those with lower incomes (59 30 percent vs. 30 percent in both cases; P<0.01)."

You're likely to encounter certain obstacles during your research. It could have been during data collection or even during conducting the sample . Whatever the issue, it's essential to inform your readers about them and their effects on the research.

Research limitations offer an opportunity to suggest further and deep research. If, for instance, you were forced to change for convenient sampling and snowball samples because of difficulties in reaching well-suited research participants, then you should mention this reason when you write your research abstract. In addition, a lack of prior studies on the subject could hinder your research.

Your conclusion should include the same number of sentences to wrap the abstract as the introduction. The majority of researchers offer an idea of the consequences of their research in this case.

Your conclusion should include three essential components:

• A significant take-home message.
• Corresponding important findings.
• The Interpretation.

Even though the conclusion of your abstract needs to be brief, it can have an enormous influence on the way that readers view your research. Therefore, make use of this section to reinforce the central message from your research. Be sure that your statements reflect the actual results and the methods you used to conduct your research.

Good Abstract Examples

Abstract example #1.

Children’s consumption behavior in response to food product placements in movies.

The abstract:

"Almost all research into the effects of brand placements on children has focused on the brand's attitudes or behavior intentions. Based on the significant differences between attitudes and behavioral intentions on one hand and actual behavior on the other hand, this study examines the impact of placements by brands on children's eating habits. Children aged 6-14 years old were shown an excerpt from the popular film Alvin and the Chipmunks and were shown places for the item Cheese Balls. Three different versions were developed with no placements, one with moderately frequent placements and the third with the highest frequency of placement. The results revealed that exposure to high-frequency places had a profound effect on snack consumption, however, there was no impact on consumer attitudes towards brands or products. The effects were not dependent on the age of the children. These findings are of major importance to researchers studying consumer behavior as well as nutrition experts as well as policy regulators."

Abstract Example #2

Social comparisons on social media: The impact of Facebook on young women’s body image concerns and mood. The abstract:

"The research conducted in this study investigated the effects of Facebook use on women's moods and body image if the effects are different from an internet-based fashion journal and if the appearance comparison tendencies moderate one or more of these effects. Participants who were female ( N = 112) were randomly allocated to spend 10 minutes exploring their Facebook account or a magazine's website or an appearance neutral control website prior to completing state assessments of body dissatisfaction, mood, and differences in appearance (weight-related and facial hair, face, and skin). Participants also completed a test of the tendency to compare appearances. The participants who used Facebook were reported to be more depressed than those who stayed on the control site. In addition, women who have the tendency to compare appearances reported more facial, hair and skin-related issues following Facebook exposure than when they were exposed to the control site. Due to its popularity it is imperative to conduct more research to understand the effect that Facebook affects the way people view themselves."

Abstract Example #3

The Relationship Between Cell Phone Use and Academic Performance in a Sample of U.S. College Students

"The cellphone is always present on campuses of colleges and is often utilised in situations in which learning takes place. The study examined the connection between the use of cell phones and the actual grades point average (GPA) after adjusting for predictors that are known to be a factor. In the end 536 students in the undergraduate program from 82 self-reported majors of an enormous, public institution were studied. Hierarchical analysis ( R 2 = .449) showed that use of mobile phones is significantly ( p < .001) and negative (b equal to -.164) connected to the actual college GPA, after taking into account factors such as demographics, self-efficacy in self-regulated learning, self-efficacy to improve academic performance, and the actual high school GPA that were all important predictors ( p < .05). Therefore, after adjusting for other known predictors increasing cell phone usage was associated with lower academic performance. While more research is required to determine the mechanisms behind these results, they suggest the need to educate teachers and students to the possible academic risks that are associated with high-frequency mobile phone usage."

Quick tips on writing a good abstract

There exists a common dilemma among early age researchers whether to write the abstract at first or last? However, it's recommended to compose your abstract when you've completed the research since you'll have all the information to give to your readers. You can, however, write a draft at the beginning of your research and add in any gaps later.

If you find abstract writing a herculean task, here are the few tips to help you with it:

1. Always develop a framework to support your abstract

Before writing, ensure you create a clear outline for your abstract. Divide it into sections and draw the primary and supporting elements in each one. You can include keywords and a few sentences that convey the essence of your message.

2. Review Other Abstracts

Abstracts are among the most frequently used research documents, and thousands of them were written in the past. Therefore, prior to writing yours, take a look at some examples from other abstracts. There are plenty of examples of abstracts for dissertations in the dissertation and thesis databases.

3. Avoid Jargon To the Maximum

When you write your abstract, focus on simplicity over formality. You should  write in simple language, and avoid excessive filler words or ambiguous sentences. Keep in mind that your abstract must be readable to those who aren't acquainted with your subject.

4. Focus on Your Research

It's a given fact that the abstract you write should be about your research and the findings you've made. It is not the right time to mention secondary and primary data sources unless it's absolutely required.

Conclusion: How to Structure an Interesting Abstract?

Abstracts are a short outline of your essay. However, it's among the most important, if not the most important. The process of writing an abstract is not straightforward. A few early-age researchers tend to begin by writing it, thinking they are doing it to "tease" the next step (the document itself). However, it is better to treat it as a spoiler.

The simple, concise style of the abstract lends itself to a well-written and well-investigated study. If your research paper doesn't provide definitive results, or the goal of your research is questioned, so will the abstract. Thus, only write your abstract after witnessing your findings and put your findings in the context of a larger scenario.

The process of writing an abstract can be daunting, but with these guidelines, you will succeed. The most efficient method of writing an excellent abstract is to centre the primary points of your abstract, including the research question and goals methods, as well as key results.

Interested in learning more about dedicated research solutions? Go to the SciSpace product page to find out how our suite of products can help you simplify your research workflows so you can focus on advancing science.

The best-in-class solution is equipped with features such as literature search and discovery, profile management, research writing and formatting, and so much more.

But before you go,

You might also like.

Consensus GPT vs. SciSpace GPT: Choose the Best GPT for Research

Literature Review and Theoretical Framework: Understanding the Differences

Types of Essays in Academic Writing - Quick Guide (2024)

GSLC Dissertation Support Guide

• GSLC Dissertation Support Guide Home
• Digital Accessibility [alt text] Requirements from OhioLINK
• Digital Dissertations [PDF] + Supplemental Files / Font Requirements
• Essential Resources: Dissertation Handbook & Style Choices & Authoritative Manuals
• Including Multimedia Inside Your Dissertation Document- Tips From WEX This link opens in a new window
• WEX FAQs and other editing tips / checklists This link opens in a new window
• Our Archives : Where your Dissertation will "live"
• Dissertation Titles and Online Discovery

Abstract Requirements

Selecting keywords & subject headings.

• Multimedia /Data Set Inclusion - Supplemental Files
• Author Introduction - Multimedia Option
• Your Name and Your ORCID Number
• Copyright and Permissions
• Permission Request Checklist
• Final Submission - Link & Important Instructions
• Post - Submission
• Curating your Scholarly Identity This link opens in a new window
• Last Steps Workshop This link opens in a new window

The Dissertation Abstract

The abstract is your dissertation's calling card to the world.  The abstract is usually your first connection with every potential reader.   It also is a key feature in discovery of your dissertation through search engines.

Abstract Requirements and Checklist :

• Number of paragraphs  : Abstract should be ONE PARAGRAPH  [no returns]
• CC License Option: If you have chosen a Creative Commons License , this must specified in the abstract mentioning the type of license and linking back the the CC License page.
• how many supplemental files
• type of file
• whether or not they are also accessible within the PDF.  
• T his includes the author video abstract
• Length:  Abstracts no longer have length requirements in UMI/Proquest, but the print version of the database will cut off at 350 words MAXIMUM.   APA Style calls for 150-250 words, which is most reasonable.    The shorter, the better.
• Final Sentence :  To enhance discovery every abstract must carry this sentence at the end

  This dissertation is available in open access at AURA: Antioch University Repository and Archive, https://aura.antioch.edu/  and OhioLINK ETD Center, https://etd.ohiolink.edu/

Keywords are also essential to your dissertation being discovered online.

Keyword Guidelines:

• Place the keywords a few lines below the Abstract in your dissertation
• Your Keyword field is limited to 350  characters
• The Keywords in the Final Submission Form must match the Keywords in the Dissertation

Selecting Keyword :

Consider:   Which words would someone interested in my dissertation use? 

• ​ Language/ Jargon  used in your academic field? e,g, community of practice, best self
• Synonyms and Related Terms:  e.g. non-profit, not-for-profit, third sector / eating disorders,  anorexia, bulimia
• Alternate Spellings :  e.g. organisation, organization
• Methodology : e.g. grounded theory, qualitative, etc.
• Population:   e.g.  teachers, executives, African Americans, college students, grandparents
• Venue:   e.g.  workplace, corporations, elementary schools

Test your Keywords in Google and Google Scholar to see if they yield the items similar to your dissertation.

Subject Headings

On the Final Submission Form you will also be able to select Subject Headings for the Ohiolink ETD Center Archive;

• These subject headings DO NOT go into your dissertation
• This is a "Controlled Vocabulary" List.    You cannot change or add to the list.  There is no Subject Heading for LEADERSHIP. So add 'leadership' in your keyword list.
• Choose the most appropriate subject headings for your dissertation.  

Attached below is the current list from which you will choose.

• << Previous: Dissertation Titles and Online Discovery
• Next: Multimedia /Data Set Inclusion - Supplemental Files >>
• Last Updated: Jul 29, 2024 7:12 AM
• URL: https://libguides-phd.antioch.edu/AUETDCENTRAL

How to Write an Abstract for Your Thesis or Dissertation What is an Abstract? The abstract is an important component of your thesis. Presented at the beginning of the thesis, it is likely the first substantive description of your work read by an external examiner. You should view it as an opportunity to set accurate expectations. The abstract is a summary of the whole thesis. It presents all the major elements of your work in a highly condensed form. An abstract often functions, together with the thesis title, as a stand-alone text. Abstracts appear, absent the full text of the thesis, in bibliographic indexes such as PsycInfo. They may also be presented in announcements of the thesis examination. Most readers who encounter your abstract in a bibliographic database or receive an email announcing your research presentation will never retrieve the full text or attend the presentation. An abstract is not merely an introduction in the sense of a preface, preamble, or advance organizer that prepares the reader for the thesis. In addition to that function, it must be capable of substituting for the whole thesis when there is insufficient time and space for the full text. Size and Structure Currently, the maximum sizes for abstracts submitted to Canada's National Archive are 150 words (Masters thesis) and 350 words (Doctoral dissertation). To preserve visual coherence, you may wish to limit the abstract for your doctoral dissertation to one double-spaced page, about 280 words. The structure of the abstract should mirror the structure of the whole thesis, and should represent all its major elements. For example, if your thesis has five chapters (introduction, literature review, methodology, results, conclusion), there should be one or more sentences assigned to summarize each chapter. Clearly Specify Your Research Questions As in the thesis itself, your research questions are critical in ensuring that the abstract is coherent and logically structured. They form the skeleton to which other elements adhere. They should be presented near the beginning of the abstract. There is only room for one to three questions. If there are more than three major research questions in your thesis, you should consider restructuring them by reducing some to subsidiary status. Don't Forget the Results The most common error in abstracts is failure to present results. The primary function of your thesis (and by extension your abstract) is not to tell readers what you did, it is to tell them what you discovered. Other information, such as the account of your research methods, is needed mainly to back the claims you make about your results. Approximately the last half of the abstract should be dedicated to summarizing and interpreting your results. Updated 2008.09.11 © John C. Nesbit

Want to Get your Dissertation Accepted?

Discover how we've helped doctoral students complete their dissertations and advance their academic careers!

Join 200+ Graduated Students

Get Your Dissertation Accepted On Your Next Submission

Get customized coaching for:.

• Crafting your proposal,
• Collecting and analyzing your data, or
• Preparing your defense.

Trapped in dissertation revisions?

How to write a dissertation abstract, published by steve tippins on may 25, 2020 may 25, 2020.

Last Updated on: 3rd June 2022, 04:27 am

The abstract is where you “sell” your dissertation. In over 95% of the cases, the first thing people see will be your dissertation’s abstract. If others (such as potential employers or fellow researchers) are going to be looking at your dissertation, you have to get their interest in the abstract. 

How do you get people’s interest? Think about what you wanted to know when you were searching, and that’s what needs to be in the abstract (in addition to anything that your school requires). 

Normally dissertation abstracts are a page or less. You’ll want to include the problem you were looking at, the questions you wanted to answer, and the methodology you used. Also include what you found and what it means (the implications). For a more in-depth explanation of what to include, see the sample outline below.

Advice for Writing a Dissertation Abstract

Every word is important in a dissertation abstract. Because the space you have is so limited, you want to make sure that every word and phrase helps the reader understand what they’re going to gain when they read the entire document. On the other hand, you don’t want to put everything in the abstract because you want them to read the actual paper.

Avoid the temptation to make it more than a page long. The truth is, people aren’t going to read a multiple-page abstract, which means they won’t read your dissertation. Don’t think of it as condensing 100+ pages of material down into one page. Rather, think of it as giving an introduction to what is contained in the pages of your dissertation.

Some schools have a rubric to follow. If they do have one, follow it to the letter. This will save you time and help you please your committee more easily. There’s also usually a good reason behind the requirements they set out, so it will improve the quality of your abstract overall.

While it takes a certain artfulness to be concise, the abstract should be a relatively easy section to write. Basically, you just have to tell people what you did. You don’t need to report any new information or do anything you haven’t already done while writing your dissertation.

Dissertation Abstract Sample Outline

Traditionally, abstracts are less than a page in length, are not indented, and contain no citations. While different universities may have slightly different requirements, most want to see some variation of the following:

• Introduce the study topic and articulate the research problem.
• State the purpose of the study
• State the research method 
• Concisely describe the overall research design, methods, and data analysis procedures.
• Identify the participants.
• Present key results 
• Outline conclusions and recommendations

What Comes After Writing Your Dissertation Abstract?

Writing your dissertation abstract means you’ve completed your study. Congratulations! As you move through the final phases of getting your degree and into your new career path, you may need support navigating today’s competitive job market. 

Academic jobs are more competitive than ever, and starting your own business is best done with the guidance of someone who’s done it before. Take a look at my academic career coaching services and book a free 30-minute consultation .

If you’re still working on your dissertation, I also offer dissertation coaching and dissertation editing services.

Steve Tippins

Steve Tippins, PhD, has thrived in academia for over thirty years. He continues to love teaching in addition to coaching recent PhD graduates as well as students writing their dissertations. Learn more about his dissertation coaching and career coaching services. Book a Free Consultation with Steve Tippins

Related Posts

Dissertation

Dissertation memes.

Sometimes you can’t dissertate anymore and you just need to meme. Don’t worry, I’ve got you. Here are some of my favorite dissertation memes that I’ve seen lately. My Favorite Dissertation Memes For when you Read more…

Surviving Post Dissertation Stress Disorder

The process of earning a doctorate can be long and stressful – and for some people, it can even be traumatic. This may be hard for those who haven’t been through a doctoral program to Read more…

PhD by Publication

PhD by publication, also known as “PhD by portfolio” or “PhD by published works,” is a relatively new route to completing your dissertation requirements for your doctoral degree. In the traditional dissertation route, you have Read more…

Home > Blog > How To Write an Abstract (With Examples)

How To Write an Abstract (With Examples)

• Smodin Editorial Team
• Updated: August 13, 2024
• Step-by-Step Instructions for Writing

The abstract is the shop front of your thesis. It’s essentially a summary of your paper outlining what you have discovered during your research.

In academia, an abstract serves several purposes:

• Offers a summary of your findings
• Other researchers use it to determine whether your work is relevant to their own research
• Helps your peers understand what you have discovered if they don’t have time to read the entire paper
• Provides an easy way to index and categorize papers for academic journals

So a good abstract has several benefits for readers and reviewers. But, beyond that, you need to know how to write a good abstract if you want to get a high grade.

In our article, we give you some of the best tips and tricks on how to write an abstract that is concise and informative.

Step 1 – Understand the Purpose of an Abstract

Before you learn how to write an abstract, you need to know what one is and what purpose it serves. A good abstract should answer these questions:

• What is the study about?
• Why did you do this study or project?
• What did you do and how?
• What were your findings?
• What do your findings mean?

Think of an abstract like a movie trailer. It gives the reader a glimpse–a teaser–of what’s to come. It helps them decide if your paper is something they’re interested in.

Usually, an abstract is 100-250 words, so you only have a small window to rope your audience in.

There are four types of abstracts. You might use a different one depending on the nature of your research paper . The different kinds of abstracts include:

• Informative abstract: Details the background information, key points, research methods, and significant findings. There may also be further reading recommendations so that the reader can understand the main elements of the paper better.
• Descriptive abstract: Provides an overview of the content, including major points and research methods. However, descriptive abstracts don’t provide significant findings or conclusions. So, they’re less helpful for determining the relevance of the work.
• Critical abstract: Evaluates or provides analysis regarding the paper’s findings, with an overview of the paper. These abstracts are longer, sometimes up to 500 words in length. They may also refer to outside information.
• Highlight abstract: Grabs the reader’s attention to hook them in. Academic writing doesn’t usually include this type of abstract, since it doesn’t really give an overview of the text.

Typically, you’ll only see the first two in academia, but a descriptive abstract is still rarer than an informative one. An informative abstract includes everything you need to know about a research paper. So, it’s the preferred method for most students.

Step 2 – Key Elements of an Abstract

Every good abstract page has certain elements, including the background, methodology, results, and conclusion. It may also include keywords listed at the end of the abstract, helping to categorize and index the paper.

Here’s everything you need to include in your abstract.

Background and Objective

The first part of the abstract should cover the background information for your central idea. Whether you’re studying social sciences or writing a scientific paper, this section is absolutely crucial. It’s the opening line that sets the tone for your entire dissertation.

You can usually do this in around three sentences. Here is what each one should include:

• Sentence 1: Introduce the topic and define the key concepts in your study.
• Sentence 2: Define the gap in the literature, describing the main existing theories and identifying their limitations.
• Sentence 3: Explain how your research will fill this gap in the knowledge and what it adds to your field.

You can also state your research question at this point. Of course, you’ll need to do a literature review to write this effectively. So, check out other abstracts and ensure you use a good sentence structure .

Example: “Climate change poses significant challenges for worldwide agricultural productivity. Despite the numerous studies that exist on its impact on crop yields, there is a lack of comprehensive analysis. Other articles do not study how these impacts vary across different climactic regions. This study aims to fill this gap by examining the regional differences in climate change effects on wheat production.”

Methodology

Next, you can outline the specific details of your project, summarizing the methodology you intend to use. At this point, you can also outline the data, theories, and case studies that you used during your research.

Generally, this can be just a single sentence highlighting your methodology. However, it can vary greatly depending on your field. For example, in scientific writing, you might need to describe the materials you’re using in the study. Meanwhile, for social sciences, it’s likely to be more theory-based.

Example: “I conducted a meta-analysis of existing studies on wheat production under varying climatic conditions. I collected data from peer-reviewed journals published between 2000 and 2023. I used statistical methods to assess the impact of temperature and precipitation changes on wheat yield.”

The next part of your abstract should state your main point. Remember, the abstract is just a brief summary, so you don’t need to go into detail. Instead, summarize all the main arguments that your paper makes and state their contribution to the field.

Even if you feel like your main findings are significant, don’t go into too much detail yet! That comes later, in the paper itself.

Example: “The results indicated a significant negative correlation between increased temperatures and wheat yields in arid and semi-arid regions. The average yield reduction was 15%. Conversely, in temperate regions, moderate temperature increases were associated with a slight yield increase of 5%. Precipitation changes had less consistent effects across different regions.”

The final part of your abstract should provide a strong conclusion. Here, you can discuss the implications of your main findings. Often, you can also incorporate key words found within the abstract and write these in a list at the end. This makes your paper easier to index.

Example: “These findings suggest that climate change adaptation strategies for wheat production must be region-specific. In arid regions, efforts must focus on heat-resistant crop varieties and improving irrigation. Meanwhile, temperate regions may benefit from optimizing planting dates and crop management.

Keywords: Climate change, wheat production, regional analysis, agricultural adaptation, crop yield.”

Step 3 – Writing the Abstract

Now that you understand what an abstract is, you can master the art of writing one. Here are Smodin’s top tips when writing an abstract.

Write a Draft

Start by writing a draft, and don’t put too much emphasis on it being perfect. Make sure your draft includes all the key elements (background, methods, results, conclusions).

Ensure that your draft provides a clear and concise summary of your research, outlining your major findings.

Revise for Clarity and Conciseness

Once you have a draft, you can start to edit and improve it. At this point, you can start to pay more attention to the word count. It’s time to cut out the unnecessary parts and improve clarity.

You should focus on making your abstract as succinct as possible while retaining the essential information. Remember, the abstract is just one paragraph, so you might need to be quite harsh in cutting bits out.

Check for Accuracy and Consistency

Finally, check for accuracy. You’ll need to ensure that the abstract accurately reflects the main ideas in the paper. Don’t mention anything you haven’t talked about in the paper!

You should also check that all the terminology and data are correct. Getting this wrong isn’t just unprofessional, but it could lose you marks!

Step 4 – Formatting the Abstract

Depending on where you’re submitting your paper, there may be a publication manual. This is certainly the case if you’re submitting a journal article. However, your college or university might also have guidelines that they use to standardize abstracts.

It’s important to follow the format that the journal or institution provides. This includes sticking to the word count (decrease or i ncrease the number of words if necessary) but also following the specific format. For example, many journals in the social sciences, natural sciences, and engineering sciences use the IMRaD structure:

• Introduction

Tips for Writing a Compelling Abstract

Want to know how to write an amazing abstract? Not just a good one, but one that’s going to get you the best grade? Here are five tips that will guarantee success.

• Be concise: It’s crucial to be brief. Potential readers don’t want to know all the details just yet. Remember, it’s only a paragraph long! Make sure you use clear and straightforward language throughout.
• Highlight key points: Your abstract should describe the main findings of your abstract, including a range of key phrases. Emphasize these aspects, and ensure that readers understand the significance of the study.
• Avoid jargon: The abstract should be accessible to a broad audience. So, minimize the use of technical terms and acronyms.
• Focus on the reader: It’s important to focus on things that the reader needs to know. The abstract should help them understand the research that comes later. Try to spark their interest without providing too much information.

Use Smodin To Write Effective Abstracts

Abstracts are important, so getting them right is a concern for many students. After all, they’re a crucial component that summarizes your research and hooks the reader. In some cases, an abstract is essential for winning you research grants.

Fortunately, you can make writing an abstract easier by using Smodin. Smodin’s AI writer can assist in crafting well-structured, comprehensive abstracts. Here are some of its key capabilities:

• Advanced language processing
• Customizable input parameters, to make the abstract your own
• Comprehensive coverage of key elements
• Keyword generation

Beyond its amazing generative capabilities, Smodin can improve efficiency and save you time! Whether you want it to generate the full text or just the abstract, Smodin helps you on your academic journey. And because it’s trained on academic data, it’s much better than similar generative AI models.

Smodin’s AI Writer offers a powerful solution for researchers looking to create effective abstracts. It can significantly enhance the quality and efficiency of your academic writing. So what are you waiting for? Try Smodin’s AI writer today!

• EXPLORE Random Article
• Happiness Hub

How to Write a Dissertation Abstract

Last Updated: March 6, 2020 References

wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, volunteer authors worked to edit and improve it over time. This article has been viewed 23,241 times.

An abstract is a small summary of a larger paper. A dissertation is a long research paper with an original argument that you must write to graduate with a Master’s degree or doctorate. An abstract helps give your reader a map of your paper before he or she reads it. It also helps researchers to know if your paper will be helpful to them before they expend time reading it. Therefore, you should try to write as clear an abstract as possible, in simple and concise language.

Including the Necessary Information

• Start with your main thesis at the top.
• Next, read each section of your paper. As you read, write a one-sentence summary of each major chapter or section. Keep them in order on your paper. Regardless of your discipline, take time to point out the key theorists in the discipline you’ll be exploring in your paper.
• Include a summary of your conclusions, as well.
• If you’re writing an abstract for a scientific dissertation, it’s not necessary to include all of your literature review; however, you might include a sentence on how your paper fits into the larger academic discussion.

• Discuss how your research fits into the larger academic discussion.
• Talk about your methodology.
• Include your conclusions.
• Take time to discuss how it could lead to further research.

• Include any major works you’re analyzing. In other words, provide a short discussion of the source material, whether it’s the diaries of a famous historical figure for a history dissertation, a work of literature, a piece of music, or a great work of art.
• Discuss the major theories you’re applying to make your argument.
• Cover your main argument.
• Talk about your conclusions.

• Include any methodology you used to conduct research.
• Provide an overview of any studies you conducted, including participants and the purpose of the study.
• Discuss major theories that you are using for analyzing your work, as well as how your research fits into the larger discussion. Remember to keep it brief.
• Don’t forget to discuss your conclusions, as well as how your research could lead to further research.

• Include major theories you are using to analyze your research.
• Talk about your research methods, especially if you are collecting data.
• Provide specifics if you are looking at a particular company or analyzing a particular model.
• Discuss your overall conclusions.

Writing Your Abstract

• The name of the article you have written.
• Publication information, if there is any.

• Remember, you’re just trying to give your reader an overview of your dissertation, not every detail.

• You should also include the sentence about your conclusion.

• Remember, you are not just summarizing your individual thoughts in your abstract, you are recreating the argument you make in your paper in a shortened form.

• For instance, if you’re an archaeologist, you need to reference your primary materials.
• If you’re a librarian, you should talk about the methods you’ve used to collect your research.
• If you’re a psychologist, talk about the way you conducted your study.

• Only include information that is in the paper; do not bring new ideas into the abstract.

• The way you implement your research in science includes methodology (how you carried out your experiment), but in a humanities paper, you’ll likely be talking about the theories you applied in your research (such as applying Foucault’s theories to a book like Wuthering Heights).

Expert Q&A

• If you wrote a scientific, sociological, or psychological dissertation (or any other type of dissertation requiring field research), be sure to include information on your methodology. Thanks Helpful 0 Not Helpful 0
• If you’re writing an abstract on a literature paper, be sure to include the major works you’re reviewing. Thanks Helpful 0 Not Helpful 0
• You can use some technical language if it is a technical paper. Thanks Helpful 0 Not Helpful 0

You Might Also Like

• ↑ http://www.sciencebuddies.org/science-fair-projects/project_abstract.shtml
• ↑ http://writingcenter.unc.edu/handouts/abstracts/
• ↑ http://libguides.usc.edu/content.php?pid=83009&sid=621164
• ↑ http://librarybissell.act.edu/content.php?pid=136789&sid=1171531
• ↑ http://users.ece.cmu.edu/~koopman/essays/abstract.html
• ↑ https://owl.english.purdue.edu/owl/resource/656/01/

About this article

To write a dissertation abstract, start with a condensed version of your thesis that's no more than 1 sentence long. Then, include sentences about the methodology you used for your research and any major points or theories you analyzed. You should also include a sentence about the conclusions you drew based on your research. In general, try to keep your dissertation abstract between 100 and 200 words. To learn how to use an outline of your dissertation to write your abstract, keep reading! Did this summary help you? Yes No

Did this article help you?

• About wikiHow
• Terms of Use
• Privacy Policy
• Do Not Sell or Share My Info
• Not Selling Info

• Cookies & Privacy
• GETTING STARTED
• Introduction
• FUNDAMENTALS
• Acknowledgements
• Research questions & hypotheses
• Concepts, constructs & variables
• Research limitations
• Getting started
• Sampling Strategy
• Research Quality
• Research Ethics
• Data Analysis

How to structure your dissertation abstract

Abstracts written for undergraduate and master's level dissertations have a number of structural components [ NOTE ]. Even though every dissertation is different, these structural components are likely to be relevant for most dissertations. When writing the dissertation abstract, the most important thing to remember is why your research was significant. This should have been clearly explained in the introductory chapter of your dissertation ( Chapter One: Introduction ). Understanding the significance of your research is important because how much you write for each component of the abstract (in terms of word count or number of sentences) will depend on the relative importance of each of these components to your research.

There are four major structural components, which aim to let the reader know about the background to and significance of your study, the research strategy being followed, the findings of the research, and the conclusions that were made. You should write one or a number of sentences for each of these components, with each making up a part of the 150 to 350 words that are typically written in dissertation abstracts. This section sets out and explains these structural components. These four major components are:

• COMPONENT #1: Study background and significance
• COMPONENT #2: Components of your research strategy
• COMPONENT #3: Findings
• COMPONENT #4: Conclusions

COMPONENT #1 Study background and significance

The first few sentences of the dissertation abstract highlight the background to your research, as well as the significance of the study. Hopefully, by the time you come to write the abstract, you will already know why your study is significant.

In explaining the significance of your study, you will also need to provide some context for your research. This includes the problem that you are addressing and your motivation for conducting the study. In building the background to the study, this part of the abstract should address questions such as:

What is the purpose of the research?

Why did you carry out the research?

How is the study significant? Why should anyone care or why do they care (is the study interesting)?

Remember, all of this needs to be encompassed within just a few sentences. Therefore, only outline those aspects of your study that you feel are the most important; those aspects that you think will catch the reader's attention.

COMPONENT #2 Components of your research strategy

The relative importance of the methodological components discussed in the dissertation abstract will depend on whether any of these components made the study significant in some way. Ask yourself the question: Did any of the following components of research strategy help make my study significant?

The broad research design (e.g., qualitative, quantitative, mixed, etc.)

The type of research design (e.g., experimental research, case study approach, grounded theory, ethnography, etc.)

The research methods (e.g., survey, interviews, focus groups, observation, etc.)

The analytical techniques used (e.g., content analysis, statistical analyses, etc.)

If the answer is YES , greater focus (and word count) should probably be dedicated to explaining these components of research strategy in the dissertation abstract. If not, try and summarise the components used more succinctly (i.e., in fewer words). Since the way that you would write the research strategy part of your dissertation abstract will vary depending on the relative significance of these components to your study, we have produced examples to help.

In explaining the approach to research strategy that you adopted in this part of your dissertation abstract, addressing some of the following questions may help:

What research design guided your study?

What was the scope of your study?

What research methods did you use?

What were the main ideas, constructs and/or variables that you examined, measured, controlled and/or ignored?

What was your unit of analysis?

What was your sample (and population)?

What analysis techniques did you use to arrive at your findings?

Often, you will be able to combine the answer to a number of these questions in a single sentence, which will help make the abstract more concise and succinct.

COMPONENT #3 Major findings

Following a discussion of the components of your research strategy, the dissertation abstract should move on to present the main findings from your research. We use the word findings and not results to emphasise the fact that the abstract is not the section where you should include lots of data; and it should definitely not include any analysis. Leave this to the Results/Findings chapter of your dissertation (often Chapter Four: Results/Findings ). Remember that the findings part of the dissertation abstract should focus on answering your research questions and/or hypotheses.

It may help to answer some of the following questions in order to write this part of the dissertation abstract:

Did the findings answer your research questions and/or hypotheses?

What did the findings show in terms of these research questions and/or hypotheses?

What are the most important findings?

What is the significance of your findings?

To what extent are your findings trustworthy (i.e., reliable, generalisable, consistent, dependable, etc.)?

You should avoid making comments that are vague or over-exaggerate your findings. You should also ensure that you explain the findings in a way that non-experts could understand without having to read additional parts of your dissertation.

COMPONENT #4 Conclusions

The final part of your dissertation abstract should focus on the conclusions from your research and the resultant implications. Bearing in mind the findings that have just been discussed, you need to address questions such as:

What has been learned?

What are the implications of the findings?

Is there potential for generalisation of your findings?

What are the limitations of your research?

When writing the conclusion part of your abstract, remember that these conclusions should be precise and concise. There is no need to re-summarise what you have already discussed or the contents of your dissertation. This is an informative abstract, not a descriptive one. If you are unsure of the difference, you may find the section, Choosing between dissertation abstract styles: Descriptive and informative , helpful. Furthermore, be careful not to make claims that cannot be supported by your findings. There is always a danger to over-exaggerate and/or over-generalise in this part of the abstract, which should be avoided. It is unlikely that you will have changed the world through your study, but you may still have added something significant to the literature, so try and strike the right balance.

NOTE: This article is based on the use of the informative abstract style, not the descriptive style; the former being the typical style adopted in undergraduate and master's dissertations and theses. For a comparison of the two styles - descriptive and informative - see the article, Choosing between dissertation abstract styles: Descriptive or informative .

In the next section, Useful phrases when writing a dissertation abstract , we set out some phrases that you may find useful when writing up your dissertation abstract.

Dissertation Structure & Layout 101: How to structure your dissertation, thesis or research project.

By: Derek Jansen (MBA) Reviewed By: David Phair (PhD) | July 2019

So, you’ve got a decent understanding of what a dissertation is , you’ve chosen your topic and hopefully you’ve received approval for your research proposal . Awesome! Now its time to start the actual dissertation or thesis writing journey.

To craft a high-quality document, the very first thing you need to understand is dissertation structure . In this post, we’ll walk you through the generic dissertation structure and layout, step by step. We’ll start with the big picture, and then zoom into each chapter to briefly discuss the core contents. If you’re just starting out on your research journey, you should start with this post, which covers the big-picture process of how to write a dissertation or thesis .

*The Caveat *

In this post, we’ll be discussing a traditional dissertation/thesis structure and layout, which is generally used for social science research across universities, whether in the US, UK, Europe or Australia. However, some universities may have small variations on this structure (extra chapters, merged chapters, slightly different ordering, etc).

So, always check with your university if they have a prescribed structure or layout that they expect you to work with. If not, it’s safe to assume the structure we’ll discuss here is suitable. And even if they do have a prescribed structure, you’ll still get value from this post as we’ll explain the core contents of each section.  

Overview: S tructuring a dissertation or thesis

• Acknowledgements page
• Abstract (or executive summary)
• Table of contents , list of figures and tables
• Chapter 1: Introduction
• Chapter 2: Literature review
• Chapter 3: Methodology
• Chapter 4: Results
• Chapter 5: Discussion
• Chapter 6: Conclusion
• Reference list

As I mentioned, some universities will have slight variations on this structure. For example, they want an additional “personal reflection chapter”, or they might prefer the results and discussion chapter to be merged into one. Regardless, the overarching flow will always be the same, as this flow reflects the research process , which we discussed here – i.e.:

• The introduction chapter presents the core research question and aims .
• The literature review chapter assesses what the current research says about this question.
• The methodology, results and discussion chapters go about undertaking new research about this question.
• The conclusion chapter (attempts to) answer the core research question .

In other words, the dissertation structure and layout reflect the research process of asking a well-defined question(s), investigating, and then answering the question – see below.

To restate that – the structure and layout of a dissertation reflect the flow of the overall research process . This is essential to understand, as each chapter will make a lot more sense if you “get” this concept. If you’re not familiar with the research process, read this post before going further.

Right. Now that we’ve covered the big picture, let’s dive a little deeper into the details of each section and chapter. Oh and by the way, you can also grab our free dissertation/thesis template here to help speed things up.

The title page of your dissertation is the very first impression the marker will get of your work, so it pays to invest some time thinking about your title. But what makes for a good title? A strong title needs to be 3 things:

• Succinct (not overly lengthy or verbose)
• Specific (not vague or ambiguous)
• Representative of the research you’re undertaking (clearly linked to your research questions)

Typically, a good title includes mention of the following:

• The broader area of the research (i.e. the overarching topic)
• The specific focus of your research (i.e. your specific context)
• Indication of research design (e.g. quantitative , qualitative , or  mixed methods ).

For example:

A quantitative investigation [research design] into the antecedents of organisational trust [broader area] in the UK retail forex trading market [specific context/area of focus].

Again, some universities may have specific requirements regarding the format and structure of the title, so it’s worth double-checking expectations with your institution (if there’s no mention in the brief or study material).

Acknowledgements

This page provides you with an opportunity to say thank you to those who helped you along your research journey. Generally, it’s optional (and won’t count towards your marks), but it is academic best practice to include this.

So, who do you say thanks to? Well, there’s no prescribed requirements, but it’s common to mention the following people:

• Your dissertation supervisor or committee.
• Any professors, lecturers or academics that helped you understand the topic or methodologies.
• Any tutors, mentors or advisors.
• Your family and friends, especially spouse (for adult learners studying part-time).

There’s no need for lengthy rambling. Just state who you’re thankful to and for what (e.g. thank you to my supervisor, John Doe, for his endless patience and attentiveness) – be sincere. In terms of length, you should keep this to a page or less.

Abstract or executive summary

The dissertation abstract (or executive summary for some degrees) serves to provide the first-time reader (and marker or moderator) with a big-picture view of your research project. It should give them an understanding of the key insights and findings from the research, without them needing to read the rest of the report – in other words, it should be able to stand alone .

For it to stand alone, your abstract should cover the following key points (at a minimum):

• Your research questions and aims – what key question(s) did your research aim to answer?
• Your methodology – how did you go about investigating the topic and finding answers to your research question(s)?
• Your findings – following your own research, what did do you discover?
• Your conclusions – based on your findings, what conclusions did you draw? What answers did you find to your research question(s)?

So, in much the same way the dissertation structure mimics the research process, your abstract or executive summary should reflect the research process, from the initial stage of asking the original question to the final stage of answering that question.

In practical terms, it’s a good idea to write this section up last , once all your core chapters are complete. Otherwise, you’ll end up writing and rewriting this section multiple times (just wasting time). For a step by step guide on how to write a strong executive summary, check out this post .

Need a helping hand?

Table of contents

This section is straightforward. You’ll typically present your table of contents (TOC) first, followed by the two lists – figures and tables. I recommend that you use Microsoft Word’s automatic table of contents generator to generate your TOC. If you’re not familiar with this functionality, the video below explains it simply:

If you find that your table of contents is overly lengthy, consider removing one level of depth. Oftentimes, this can be done without detracting from the usefulness of the TOC.

Right, now that the “admin” sections are out of the way, its time to move on to your core chapters. These chapters are the heart of your dissertation and are where you’ll earn the marks. The first chapter is the introduction chapter – as you would expect, this is the time to introduce your research…

It’s important to understand that even though you’ve provided an overview of your research in your abstract, your introduction needs to be written as if the reader has not read that (remember, the abstract is essentially a standalone document). So, your introduction chapter needs to start from the very beginning, and should address the following questions:

• What will you be investigating (in plain-language, big picture-level)?
• Why is that worth investigating? How is it important to academia or business? How is it sufficiently original?
• What are your research aims and research question(s)? Note that the research questions can sometimes be presented at the end of the literature review (next chapter).
• What is the scope of your study? In other words, what will and won’t you cover ?
• How will you approach your research? In other words, what methodology will you adopt?
• How will you structure your dissertation? What are the core chapters and what will you do in each of them?

These are just the bare basic requirements for your intro chapter. Some universities will want additional bells and whistles in the intro chapter, so be sure to carefully read your brief or consult your research supervisor.

If done right, your introduction chapter will set a clear direction for the rest of your dissertation. Specifically, it will make it clear to the reader (and marker) exactly what you’ll be investigating, why that’s important, and how you’ll be going about the investigation. Conversely, if your introduction chapter leaves a first-time reader wondering what exactly you’ll be researching, you’ve still got some work to do.

Now that you’ve set a clear direction with your introduction chapter, the next step is the literature review . In this section, you will analyse the existing research (typically academic journal articles and high-quality industry publications), with a view to understanding the following questions:

• What does the literature currently say about the topic you’re investigating?
• Is the literature lacking or well established? Is it divided or in disagreement?
• How does your research fit into the bigger picture?
• How does your research contribute something original?
• How does the methodology of previous studies help you develop your own?

Depending on the nature of your study, you may also present a conceptual framework towards the end of your literature review, which you will then test in your actual research.

Again, some universities will want you to focus on some of these areas more than others, some will have additional or fewer requirements, and so on. Therefore, as always, its important to review your brief and/or discuss with your supervisor, so that you know exactly what’s expected of your literature review chapter.

Now that you’ve investigated the current state of knowledge in your literature review chapter and are familiar with the existing key theories, models and frameworks, its time to design your own research. Enter the methodology chapter – the most “science-ey” of the chapters…

In this chapter, you need to address two critical questions:

• Exactly HOW will you carry out your research (i.e. what is your intended research design)?
• Exactly WHY have you chosen to do things this way (i.e. how do you justify your design)?

Remember, the dissertation part of your degree is first and foremost about developing and demonstrating research skills . Therefore, the markers want to see that you know which methods to use, can clearly articulate why you’ve chosen then, and know how to deploy them effectively.

Importantly, this chapter requires detail – don’t hold back on the specifics. State exactly what you’ll be doing, with who, when, for how long, etc. Moreover, for every design choice you make, make sure you justify it.

In practice, you will likely end up coming back to this chapter once you’ve undertaken all your data collection and analysis, and revise it based on changes you made during the analysis phase. This is perfectly fine. Its natural for you to add an additional analysis technique, scrap an old one, etc based on where your data lead you. Of course, I’m talking about small changes here – not a fundamental switch from qualitative to quantitative, which will likely send your supervisor in a spin!

You’ve now collected your data and undertaken your analysis, whether qualitative, quantitative or mixed methods. In this chapter, you’ll present the raw results of your analysis . For example, in the case of a quant study, you’ll present the demographic data, descriptive statistics, inferential statistics , etc.

Typically, Chapter 4 is simply a presentation and description of the data, not a discussion of the meaning of the data. In other words, it’s descriptive, rather than analytical – the meaning is discussed in Chapter 5. However, some universities will want you to combine chapters 4 and 5, so that you both present and interpret the meaning of the data at the same time. Check with your institution what their preference is.

Now that you’ve presented the data analysis results, its time to interpret and analyse them. In other words, its time to discuss what they mean, especially in relation to your research question(s).

What you discuss here will depend largely on your chosen methodology. For example, if you’ve gone the quantitative route, you might discuss the relationships between variables . If you’ve gone the qualitative route, you might discuss key themes and the meanings thereof. It all depends on what your research design choices were.

Most importantly, you need to discuss your results in relation to your research questions and aims, as well as the existing literature. What do the results tell you about your research questions? Are they aligned with the existing research or at odds? If so, why might this be? Dig deep into your findings and explain what the findings suggest, in plain English.

The final chapter – you’ve made it! Now that you’ve discussed your interpretation of the results, its time to bring it back to the beginning with the conclusion chapter . In other words, its time to (attempt to) answer your original research question s (from way back in chapter 1). Clearly state what your conclusions are in terms of your research questions. This might feel a bit repetitive, as you would have touched on this in the previous chapter, but its important to bring the discussion full circle and explicitly state your answer(s) to the research question(s).

Next, you’ll typically discuss the implications of your findings . In other words, you’ve answered your research questions – but what does this mean for the real world (or even for academia)? What should now be done differently, given the new insight you’ve generated?

Lastly, you should discuss the limitations of your research, as well as what this means for future research in the area. No study is perfect, especially not a Masters-level. Discuss the shortcomings of your research. Perhaps your methodology was limited, perhaps your sample size was small or not representative, etc, etc. Don’t be afraid to critique your work – the markers want to see that you can identify the limitations of your work. This is a strength, not a weakness. Be brutal!

This marks the end of your core chapters – woohoo! From here on out, it’s pretty smooth sailing.

The reference list is straightforward. It should contain a list of all resources cited in your dissertation, in the required format, e.g. APA , Harvard, etc.

It’s essential that you use reference management software for your dissertation. Do NOT try handle your referencing manually – its far too error prone. On a reference list of multiple pages, you’re going to make mistake. To this end, I suggest considering either Mendeley or Zotero. Both are free and provide a very straightforward interface to ensure that your referencing is 100% on point. I’ve included a simple how-to video for the Mendeley software (my personal favourite) below:

Some universities may ask you to include a bibliography, as opposed to a reference list. These two things are not the same . A bibliography is similar to a reference list, except that it also includes resources which informed your thinking but were not directly cited in your dissertation. So, double-check your brief and make sure you use the right one.

The very last piece of the puzzle is the appendix or set of appendices. This is where you’ll include any supporting data and evidence. Importantly, supporting is the keyword here.

Your appendices should provide additional “nice to know”, depth-adding information, which is not critical to the core analysis. Appendices should not be used as a way to cut down word count (see this post which covers how to reduce word count ). In other words, don’t place content that is critical to the core analysis here, just to save word count. You will not earn marks on any content in the appendices, so don’t try to play the system!

Time to recap…

And there you have it – the traditional dissertation structure and layout, from A-Z. To recap, the core structure for a dissertation or thesis is (typically) as follows:

• Acknowledgments page

Most importantly, the core chapters should reflect the research process (asking, investigating and answering your research question). Moreover, the research question(s) should form the golden thread throughout your dissertation structure. Everything should revolve around the research questions, and as you’ve seen, they should form both the start point (i.e. introduction chapter) and the endpoint (i.e. conclusion chapter).

I hope this post has provided you with clarity about the traditional dissertation/thesis structure and layout. If you have any questions or comments, please leave a comment below, or feel free to get in touch with us. Also, be sure to check out the rest of the  Grad Coach Blog .

Psst... there’s more!

This post was based on one of our popular Research Bootcamps . If you're working on a research project, you'll definitely want to check this out ...

36 Comments

many thanks i found it very useful

Glad to hear that, Arun. Good luck writing your dissertation.

Such clear practical logical advice. I very much needed to read this to keep me focused in stead of fretting.. Perfect now ready to start my research!

what about scientific fields like computer or engineering thesis what is the difference in the structure? thank you very much

Thanks so much this helped me a lot!

Very helpful and accessible. What I like most is how practical the advice is along with helpful tools/ links.

Thanks Ade!

Thank you so much sir.. It was really helpful..

You’re welcome!

Hi! How many words maximum should contain the abstract?

Thank you so much 😊 Find this at the right moment

You’re most welcome. Good luck with your dissertation.

best ever benefit i got on right time thank you

Many times Clarity and vision of destination of dissertation is what makes the difference between good ,average and great researchers the same way a great automobile driver is fast with clarity of address and Clear weather conditions .

I guess Great researcher = great ideas + knowledge + great and fast data collection and modeling + great writing + high clarity on all these

You have given immense clarity from start to end.

Morning. Where will I write the definitions of what I’m referring to in my report?

Thank you so much Derek, I was almost lost! Thanks a tonnnn! Have a great day!

Thanks ! so concise and valuable

This was very helpful. Clear and concise. I know exactly what to do now.

Thank you for allowing me to go through briefly. I hope to find time to continue.

Really useful to me. Thanks a thousand times

Very interesting! It will definitely set me and many more for success. highly recommended.

Thank you soo much sir, for the opportunity to express my skills

Usefull, thanks a lot. Really clear

Very nice and easy to understand. Thank you .

That was incredibly useful. Thanks Grad Coach Crew!

My stress level just dropped at least 15 points after watching this. Just starting my thesis for my grad program and I feel a lot more capable now! Thanks for such a clear and helpful video, Emma and the GradCoach team!

Do we need to mention the number of words the dissertation contains in the main document?

It depends on your university’s requirements, so it would be best to check with them 🙂

Such a helpful post to help me get started with structuring my masters dissertation, thank you!

Great video; I appreciate that helpful information

It is so necessary or avital course

This blog is very informative for my research. Thank you

Doctoral students are required to fill out the National Research Council’s Survey of Earned Doctorates

wow this is an amazing gain in my life

This is so good

How can i arrange my specific objectives in my dissertation?

Trackbacks/Pingbacks

• What Is A Literature Review (In A Dissertation Or Thesis) - Grad Coach - […] is to write the actual literature review chapter (this is usually the second chapter in a typical dissertation or…

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

ZSR Library

• Thu 8/15 8AM – 5PM
• Fri 8/16 8AM – 5PM
• Sat 8/17 CLOSED
• Sun 8/18 CLOSED
• Mon 8/19 8AM – 5PM
• Tue 8/20 8AM – 5PM
• Wed 8/21 8AM – 6PM
• See more hours ›

Tips for Abstracts and Keywords

When submitting your ETD, you must include an abstract for your thesis or dissertation. The abstract will be included in the public record of your thesis or dissertation.

Keywords are also required for your ETD. When selecting keywords, choose keywords that describe the content of your thesis or dissertation. Use keywords that will be easily recognized by others in your discipline.

• personality
• atomic emission spectroscopy
• Renaissance music
• Pride and Prejudice
• Jane Austen
• global feminism

Try not to use adjectives by themselves as keywords. For example, the word long-term doesn’t convey meaning by itself. However, if used in conjunction with a noun (e.g. long-term care), the meaning has greater significance. If possible include at least one keyword that does not appear in the abstract or title.

• How It Works
• PhD thesis writing
• Master thesis writing
• Bachelor thesis writing
• Dissertation writing service
• Dissertation abstract writing
• Thesis proposal writing
• Thesis editing service
• Thesis proofreading service
• Thesis formatting service
• Coursework writing service
• Research paper writing service
• Architecture thesis writing
• Computer science thesis writing
• Engineering thesis writing
• History thesis writing
• MBA thesis writing
• Nursing dissertation writing
• Psychology dissertation writing
• Sociology thesis writing
• Statistics dissertation writing
• Buy dissertation online
• Write my dissertation
• Cheap thesis
• Cheap dissertation
• Custom dissertation
• Dissertation help
• Pay for thesis
• Pay for dissertation
• Senior thesis
• Write my thesis

How to Craft a Killer Dissertation Abstract 2023

Learn how you can write a top-rated dissertation abstract thick and fast, with our professional guide.

Special tip – maintain a hawk-eye to the end.

What is an Abstract in a Dissertation?

A dissertation abstract is a summary of the entire thesis. It gives the significant proponents of your paper in a highly condensed form.

An abstract in a dissertation serves the following functions:

• Acts as an introduction to your dissertation article
• Sets the stage for the thesis
• Can substitute the whole thesis

The elements of an abstract include:

• Research problem and objectives
• Major results
• The conclusion

It is an essential component of the thesis that can either earn you a top grade or be the reason for your academic downfall.

How to Write a Dissertation Abstract

It is essential to determine the type of abstract for your dissertation. In writing a dissertation abstract, take note of the following types:

• Descriptive Abstract

It gives the kind of information found in your paper. A descriptive outline is usually concise and can be about 100 words or less.

• Critical Abstract

It describes the main findings and, additionally, a comment on the validity, completeness, or reliability of the study. Due to its interpretive nature, it generally contains 400-500 words in length.

• Informative Abstract

As the name suggests, this type presents and explains the main arguments, essential results, and evidence in the thesis. Although the length varies, it is not more than 300 words in length.

• Highlight Abstract

It serves to attract the reader’s attention to the paper. It uses leading remarks to spark the interest of the audience.

We are now going to see how to write an abstract for a dissertation in ten significant steps:

Ten Top-Notch Steps to Writing an Abstract for a Dissertation

Step 1: Define the purpose of your research

Start by making plain the purpose of your study. State the research question you are going to handle or the practical problem of your paper.

Do not delve into much detailed information here. For starters, you can have a brief context on the social or academic relevance of your topic.

Write the objectives of your research after stating the problem. When indicating the goals, use verbs such as:

To test To investigate, To evaluate To analyze

Use either the present or simple past tense for this section. Do not use the future tense in any case since the research is complete already.

Dissertation abstract example for this section:

Correct: This study evaluates the relationship between COVID-19 and flu. Incorrect: This study will determine the relationship between COVID-19 and influenza.

Step 2: Identify the methods you are going to use for your research

Now in this stage, clearly make mention of the ways you are going to use to answer your research question.

Write it in one to two sentences without making it too long. Ensure that the points are precise and to the end.

It should be in the simple past tense. Why? Because you have already done your research and completed it using these methods.

Do not go into the strengths and weaknesses of the research methods. The reader should be able to read through it fast and still understand the strategy and methodology of your thesis.

Correct: Direct observation was conducted on 40 COVID-19 patients. Correct: Questionnaires were administered to 20 doctors dealing with COVID-19 patients. Incorrect: Laboratory experiments will be done with ten specimens.

Step 3: Make a summary of the results

After collecting data, it is time to give brief but elaborate results in the abstract for the dissertation.

The results section depends on the length and complexity of the research. However, ensure that it doesn’t make the abstract longer than is recommended.

Do not include irrelevant results which may not add any value to your paper. Strive to point out the essential outcomes of the article which support or answer your research question.

Write the results in either the present or simple past tense.

Correct: Our findings show a substantial similarity in the symptoms of both COVID-19 and flu. Correct: Our analysis showed a significant similarity between the symptoms of both COVID-19 and flu. Incorrect: Our study has shown a considerable similarity in the symptoms of both COVID-19 and flu. Incorrect: Our findings will be showing a substantial similarity in the symptoms of both COVID-19 and flu.

Step 4: Finish off with the conclusions from your research

Your abstract should have an answer to the research question, which is in this part. Your reader should get the main point of your thesis at this point. What has your research found or proved? The conclusion should be able to tell this to the reader.

Improve the credibility of your dissertation by adding any relevant limitations in this section of the abstract. From the thesis abstract examples, we are going to see below; it is evident that the conclusion is as brief as possible.

You can also have recommendations or suggestions for further research in your conclusion. Nevertheless, they should be as brief as possible. Do not write a long list that will interfere with the length of the abstract.

Write the conclusion in the present simple tense. Here are examples for your inspiration:

Correct: We conclude that flu is a primary symptom of COVID-19. Incorrect: We found that influenza is a primary symptom of COVID-19.

Bonus Tips for Writing a Dissertation Abstract

Now that we have looked at the essential steps to follow, here are some expert tips to crank up your abstract:

Follow the recommended formatting requirements for the abstract. The format will include; word limit, length, and spacing, style (APA, MLA, etc.)

The standard formatting requires that you do not write more than one double-spaced page.

• Avoid verbosity

Each word in a sentence counts due to the brevity of an abstract. Therefore, use short but communicating sentences.

Do not add unnecessary words or jargon, as this will obscure your abstract. Remember that the reader should be able to understand your abstract in the shortest time possible.

Ensure that you maintain the proper balance between the different elements of the abstract.

Checklist for Writing an Abstract

• The type of abstract identified
• The conformity of the abstract to the conventions of the type chosen
• Is the problem interesting to write on
• What is your approach? (Prototype models, analytical models, etc.)
• What’s the answer (results)
• What is the implication of your solution? (Conclusion)

Writing a successful abstract requires both hard work and determination, but its fruits are worth the struggle. As you plan to write yours, ensure that all the elements discussed above appear in your paper.

For expert writing help , we have professional dissertation writers to get you started. What are you waiting for now?

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Comment * Error message

Name * Error message

Email * Error message

Save my name, email, and website in this browser for the next time I comment.

As Putin continues killing civilians, bombing kindergartens, and threatening WWIII, Ukraine fights for the world's peaceful future.

Ukraine Live Updates

• Dissertation & Thesis Guides
• Basics of Dissertation & Thesis Writing
• How to Write an Abstract for a Dissertation or Thesis: Guide & Examples
• Speech Topics
• Basics of Essay Writing
• Essay Topics
• Other Essays
• Main Academic Essays
• Research Paper Topics
• Basics of Research Paper Writing
• Miscellaneous
• Chicago/ Turabian
• Data & Statistics
• Methodology
• Admission Writing Tips
• Admission Advice
• Other Guides
• Student Life
• Studying Tips
• Understanding Plagiarism
• Academic Writing Tips

• Essay Guides
• Research Paper Guides
• Formatting Guides
• Basics of Research Process
• Admission Guides

How to Write an Abstract for a Dissertation or Thesis: Guide & Examples

Table of contents

Use our free Readability checker

A dissertation abstract is a brief summary of a dissertation, typically between 150-300 words. It is a standalone piece of writing that gives the reader an overview of the main ideas and findings of the dissertation.

Generally, this section should include:

• Research problem and questions
• Research methodology
• Key findings and results
• Original contribution
• Practical or theoretical implications.

You need to write an excellent abstract for a dissertation or thesis, since it's the first thing a comitteee will review. Continue reading through to learn how to write a dissertation abstract. In this article, we will discuss its purpose, length, structure and writing steps. Moreover, for reference purposes, this article will include abstract examples for a dissertation and thesis and offer extra guidance on top of that.

In case you are in a hurry, feel free to buy dissertation from our professional writers. Our experts are qualified and have solid experience in writing Ph.D. academic works.

What Is a Dissertation Abstract?

Dissertation abstracts, by definition, are summaries of a thesis's content, usually between 200 and 300 words, used to inform readers about the contents of the study in a quick way. A thesis or dissertation abstract briefly overviews the entire thesis. Dissertation abstracts are found at the beginning of every study, providing the research recap, results, and conclusions. It usually goes right after your title page and before your dissertation table of contents . An abstract for a dissertation (alternatively called “précis” further in the article) should clearly state the main topic of your paper, its overall purpose, and any important research questions or findings. It should also contain any necessary keywords that direct readers to relevant information. In addition, it addresses any implications for further research that may stem from its field. Writing strong précis requires you to think carefully, as they are the critical components that attract readers to peruse your paper.

Purpose of a Dissertation or Thesis Abstract

The primary purpose of an abstract in a dissertation or thesis is to give readers a basic understanding of the completed work. Also, it should create an interest in the topic to motivate readers to read further. Writing an abstract for a dissertation is essential for many reasons: 

• Offers a summary and gives readers an overview of what they should expect from your study.
• Provides an opportunity to showcase the research done, highlighting its importance and impact.
• Identifies any unexplored research gaps to inform future studies and direct the current state of knowledge on the topic.

In general, an abstract of a thesis or a dissertation is a bridge between the research and potential readers.

What Makes a Good Abstract for a Dissertation?

Making a good dissertation abstract requires excellent organization and clarity of thought. Proper specimens must provide convincing arguments supporting your thesis. Writing an effective dissertation abstract requires students to be concise and write engagingly. Below is a list of things that makes it outstanding:

• Maintains clear and concise summary style
• Includes essential keywords for search engine optimization
• Accurately conveys the scope of the thesis
• Strictly adheres to the word count limit specified in your instructions
• Written from a third-person point of view
• Includes objectives, approach, and findings
• Uses simple language without jargon
• Avoids overgeneralized statements or vague claims.

How Long Should a Dissertation Abstract Be?

Abstracts should be long enough to convey the key points of every thesis, yet brief enough to capture readers' attention. A dissertation abstract length should typically be between 200-300 words, i.e., 1 page. But usually, length is indicated in the requirements. Remember that your primary goal here is to provide an engaging and informative thesis summary. Note that following the instructions and templates set forth by your university will ensure your thesis or dissertation abstract meets the writing criteria and adheres to all relevant standards.

Dissertation Abstract Structure

Dissertation abstracts can be organized in different ways and vary slightly depending on your work requirements. However, each abstract of a dissertation should incorporate elements like keywords, methods, results, and conclusions. The structure of a thesis or a dissertation abstract should account for the components included below:

• Title Accurately reflects the topic of your thesis.
• Introduction Provides an overview of your research, its purpose, and any relevant background information.
• Methods/ Approach Gives an outline of the methods used to conduct your research.
• Results Summarizes your findings.
• Conclusions Provides an overview of your research's accomplishments and implications.
• Keywords Includes keywords that accurately describe your thesis.

Below is an example that shows how a dissertation abstract looks, how to structure it and where each part is located. Use this template to organize your own summary. 

Things to Consider Before Writing a Dissertation Abstract

There are several things you should do beforehand in order to write a good abstract for a dissertation or thesis. They include:

• Reviewing set requirements and making sure you clearly understand the expectations
• Reading other research works to get an idea of what to include in yours
• Writing a few drafts before submitting your final version, which will ensure that it's in the best state possible.

Write an Abstract for a Dissertation Last

Remember, it's advisable to write an abstract for a thesis paper or dissertation last. Even though it’s always located in the beginning of the work, nevertheless, it should be written last. This way, your summary will be more accurate because the main argument and conclusions are already known when the work is mostly finished - it is incomparably easier to write a dissertation abstract after completing your thesis. Additionally, you should write it last because the contents and scope of the thesis may have changed during the writing process. So, create your dissertation abstract as a last step to help ensure that it precisely reflects the content of your project.

Carefully Read Requirements

Writing dissertation abstracts requires careful attention to details and adherence to writing requirements. Refer to the rubric or guidelines that you were presented with to identify aspects to keep in mind and important elements, such as correct length and writing style, and then make sure to comprehensively include them. Careful consideration of these requirements ensures that your writing meets every criterion and standard provided by your supervisor to increase the chances that your master's thesis is accepted and approved.   

Choose the Right Type of Dissertation Abstracts

Before starting to write a dissertation or thesis abstract you should choose the appropriate type. Several options are available, and it is essential to pick one that best suits your dissertation's subject. Depending on their purpose, there exist 3 types of dissertation abstracts: 

• Informative
• Descriptive

Informative one offers readers a concise overview of your research, its purpose, and any relevant background information. Additionally, this type includes brief summaries of all results and dissertation conclusions .  A descriptive abstract in a dissertation or thesis provides a quick overview of the research, but it doesn't incorporate any evaluation or analysis because it only offers a snapshot of the study and makes no claims.

Critical abstract gives readers an in-depth overview of the research and include an evaluative component. This means that this type also summarizes and analyzes research data, discusses implications, and makes claims about the achievements of your study. In addition, it examines the research data and recounts its implications. 

Choose the correct type of dissertation abstract to ensure that it meets your paper’s demands.

How to Write an Abstract for a Dissertation or Thesis?

Writing a good abstract for a dissertation or thesis is essential as it provides a brief overview of the completed research. So, how to write a dissertation abstract? First of all, the right approach is dictated by an institution's specific requirements. However, a basic structure should include the title, an introduction to your topic, research methodology, findings, and conclusions. Composing noteworthy precis allows you to flaunt your capabilities and grants readers a concise glimpse of the research. Doing this can make an immense impact on those reviewing your paper.

1. Identify the Purpose of Your Study

An abstract for thesis paper or dissertation is mainly dependent on the purpose of your study. Students need to identify all goals and objectives of their research before writing their précis - the reason being to ensure that the investigation’s progress and all its consequent findings are described simply and intelligibly. Additionally, one should provide some background information about their study. A short general description helps your reader acknowledge and connect with the research question. But don’t dive too deep into details, since more details are provided when writing a dissertation introduction . Scholars should write every dissertation abstract accurately and in a coherent way to demonstrate their knowledge and understanding of the area. This is the first section that potential readers will see, and it should serve as a precise overview of an entire document. Therefore, researchers writing abstracts of a thesis or dissertation should do it with great care and attention to details.

2. Discuss Methodology

A writer needs to elaborate on their methodological approach in an abstract of PhD dissertation since it acts as a brief summary of a whole research and should include an explanation of all methods used there. Dissertation and thesis abstracts discuss the research methodology by providing information sufficient enough to understand the underlying research question, data collection methods, and approach employed. Additionally, they should explain the analysis or interpretation of the data. This will help readers to gain a much better understanding of the research process and allow them to evaluate the data quality. Mention whether your methodology is quantitative or qualitative since this information is essential for readers to grasp your study's context and scope. Additionally, comment on the sources used and any other evidence collected. Furthermore, explain why you chose the method in the first place. All in all, addressing methodology is a crucial part of writing abstracts of a thesis or dissertation, as it will allow people to understand exactly how you arrived at your conclusions.

3. Describe the Key Results

Write your abstract for dissertation in a way that includes an overview of the research problem, your proposed solution, and any limitations or constraints you faced. Students need to briefly and clearly describe all key findings from the research. You must ensure that the results mentioned in an abstract of a thesis or dissertation are supported with evidence from body chapters.  Write about any crucial trends or patterns that emerged from the study. They should be discussed in detail, as this information can often provide valuable insight into your topic. Be sure to include any correlations or relationships found as a result of the study. Correlation, in this context, refers to any association between two or more variables.  Finally, write about any implications or conclusions drawn from your results: this is an essential element when writing an abstract for dissertation since it allows readers to firmly comprehend the study’s significance.

4. Summarize an Abstract for a Dissertation

Knowing how to write an abstract for dissertation is critical in conveying your work to a broad audience. Summarizing can be challenging (since precis is a summary in itself), but it is an essential part of any successful work. So, as a final step, conclude this section with a brief overview of the topic, outline the course of your research and its main results, and answer the paper’s central question.  Summarizing an abstract of your dissertation is done to give readers a succinct impression of the entire paper, making an accurate and concise overview of all its key points and consequent conclusions. In every PhD dissertation abstract , wrap up its summary by addressing any unanswered questions and discussing any potential implications of the research.

How to Format an Abstract in Dissertation

Format depends on the style (APA, MLA, Harvard, Chicago), which varies according to your subject's discipline. Style to use is usually mentioned in the instructions, and students should follow them closely to ensure formatting accuracy. These styles have guidelines that inform you about the formatting of titles, headings and subheadings, margins, page numbers, abstracts, and tell what font size and family or line spacing are required. Using a consistent formatting style ensures proper readability and might even influence paper’s overall structure. Another formatting concern to consider when writing dissertation and thesis abstracts is their layout. Most commonly, your paper should have a one-inch margin on all sides with double spacing. Be sure to familiarize yourself with the right guidelines to get the correct information on how to write dissertation abstract in APA format and ensure that it meets formatting standards.

Keywords in a Dissertation Abstract

When writing thesis abstracts, it is essential to include keywords. Keywords are phrases or words that help readers identify main topics of your paper and make it easier for them to find any information they need. Keywords should usually be placed at the end of a dissertation abstract and written in italics. In addition, include keywords that represent your paper's primary research interests and topics. Lastly, use keywords throughout your thesis to ensure that your précis accurately reflect an entire paper's content.

Thesis and Dissertation Abstract Examples

When writing, checking out thesis and dissertation abstracts examples from experts can provide a valuable reference point for structuring and formatting your own précis. When searching for an excellent sample template, engaging the assistance of a professional writer can be highly beneficial. Their expertise and knowledge offer helpful insight into creating an exemplary document that exceeds all expectations. Examples of dissertation abstracts from different topics are commonly available in scholarly journals and websites. We also encourage you to go and search your university or other local library catalogue -  multiple useful samples can surely be found there. From our part, we will attach 2 free examples for inspiration.

Dissertation abstract example

Thesis abstract example

Need a custom summary or a whole work? Contact StudyCrumb and get proficient assistance with PhD writing or dissertation proposal help .

Extra Tips on Writing a Dissertation Abstract

Writing a dissertation or PhD thesis abstract is not an easy task. You must ensure that it accurately reflects your paper's content. In this context, we will provide top-class tips on how to write an abstract in a dissertation or thesis for you to succeed. Combined with an example of a dissertation abstract above, you can rest assured that you'll do everything correctly. Below are extra tips on how to write a thesis abstract:

• Keep it concise, not lengthy - around 300 words.
• Focus on the “what”, “why”, “how”, and “so what” of your research.
• Be specific and concrete: avoid generalization.
• Use simple language: précis should be easy to understand for readers unfamiliar with your topic.
• Provide enough relevant information so your readers can grasp a main idea without necessarily reading your paper in its entirety.
• Write and edit your abstract several times until every sentence is clear and concise.
• Verify accuracy: make sure that précis reflect your content precisely.

Bottom Line on How to Write a Dissertation or Thesis Abstract

The bottom line when it comes to how to write a dissertation abstract is that you basically need to mirror your study's essence on a much lower scale. Specifically, students should keep their précis concise, use simple language, include relevant information, and write several drafts. Don't forget to review your précis and make sure they are precise enough. In addition, make sure to include all keywords so readers can find your paper quickly. You are encouraged to examine several sample dissertation abstracts to understand how to write your own.

Are you still struggling with your abstract? Contact our dissertation writing service and our qualified writers will gladly help you with this uneasy task. They will make sure it is delivered strictly on time and meets all requirements!  

FAQ About Dissertation Abstract Writing

1. why is a dissertation abstract important.

Dissertation abstracts are important because they give readers a brief overview of your research. They succinctly introduce critical information and study’s key points to help readers decide if reading your thesis is worth their time. During indexing, an abstract allows categorizing and filtering papers through keyword searches. Consequently, this helps readers to easily find your paper when searching for information on a specific topic.

2. When should I write an abstract for a dissertation or thesis?

You are supposed to write a dissertation or thesis abstract after completing research and finishing work on your paper. This way, you can write précis that accurately reflects all necessary information without missing any important details. Writing your thesis précis last also lets you provide the right keywords to help readers find your dissertation.

3. What should a dissertation abstract include?

A dissertation abstract should include a research problem, goals and objectives, methods, results, and study implications. Ensure that you incorporate enough information so readers can get an idea of your thesis's content without reading it through. Use relevant keywords to ensure readers can easily find your paper when searching for information on a specific topic.

4. How to write a strong dissertation abstract?

To write a strong abstract for a dissertation, you should state your research problem, write in an active voice, use simple language, and provide relevant information. Additionally, write and edit your précis several times until it is clear and concise, and verify that it accurately mirrors your paper’s content. Reviewing several samples is also helpful for understanding how to write your own.

Joe Eckel is an expert on Dissertations writing. He makes sure that each student gets precious insights on composing A-grade academic writing.

You may also like

Free Al Office Suite with PDF Editor

Edit Word, Excel, and PPT for FREE.

Read, edit, and convert PDFs with the powerful PDF toolkit.

Microsoft-like interface, easy to use.

Windows • MacOS • Linux • iOS • Android

• Articles of Word

How to Write an Abstract - Steps with Examples

Writing reports, papers, and assignments is a significant part of college life, and it often involves complex writing and analysis. One of the most challenging aspects can be crafting an effective abstract. After completing your report, summarizing it concisely can seem daunting. In this guide, I’ll walk you through how to write an abstract for paper that clearly and effectively summarizes your work, making it easier for your readers to grasp the main points.

What to Include & How to Structure Your Abstract?

A.what to include.

An abstract serves as a concise summary of a research paper, providing readers with a quick overview of its essential aspects. It typically begins by setting the context and significance of the research, outlining the broader field and specific topic under study. Central to the abstract is a clear articulation of the research question or problem that the study addresses, emphasizing its relevance and importance within the discipline. Building upon existing literature, the abstract succinctly summarizes previous research while highlighting gaps or limitations that motivate the current study.

Context or Background: Briefly introduce the general and specific topics of your research.

Central Question or Problem: Clearly state the research question or problem addressed.

Previous Research: Summarize what is already known and highlight gaps or limitations.

Methods: Outline the research or analytical methods used.

Findings: Present the main findings or arguments.

Significance: Explain the implications or significance of your findings.

B.How to Structure

Introduction:

Begin with a sentence that sets the context and importance of your research topic.

Briefly mention the specific aspect of the topic that your paper focuses on.

Provide a concise summary of the methods used in your study.

Mention any unique approaches or innovations in your methodology.

Summarize the most significant findings of your research.

Highlight any unexpected results or patterns observed.

Conclusion:

Conclude with the significance of your findings.

Discuss how your research contributes to the field and suggest areas for future study.

C.Things to Avoid

Citing References: Avoid including citations or detailed literature reviews.

Detailed Explanations: Keep descriptions of methods and data concise.

Jargon and Technical Language: Use clear and accessible language to ensure understanding

Types of Abstract

There are two primary types of abstracts: descriptive and informative.

1.Descriptive Abstract:

A descriptive abstract provides a brief overview of the purpose and scope of the research without delving into specific details of findings or conclusions. It aims to give readers a snapshot of what the paper is about.

An example of a descriptive abstract would be where in a study analyzing economic homogamy among spouses, a descriptive abstract might introduce the topic and outline the general findings about increasing economic resemblance between partners without specifying the detailed methods or specific results.

2.Informative Abstract:

An informative abstract offers a comprehensive summary of the entire research paper, including the purpose, methods, results, and conclusions. It provides readers with a clear understanding of the study's objectives and outcomes.

For instance, in a research paper on reprogramming fibroblasts into induced cardiac progenitor cells, an informative abstract would detail the methods used (such as specific gene factors and signaling pathways), summarize the main findings (including the types of cells generated and their potential applications), and discuss the broader implications for cardiac regenerative therapy.

Both types of abstracts serve distinct purposes: descriptive abstracts give a broad overview suitable for quickly understanding the topic, while informative abstracts provide detailed insights into the research, making them ideal for readers seeking in-depth knowledge without reading the full paper.

How to Write an Abstract for paper in 4 Steps [With Examples]

Now that we know an abstract is simply a concise summary of our entire research, the next step is to learn how to write an abstract for a research paper. Remember, the structure of an abstract needs to be followed strictly, and it should be within 300 words to ensure it is impactful and fulfills its purpose. The structure includes:

Problem Statement (1-2 sentences)

Methodology (1-2 sentences)

Results (2-3 sentences)

Significance (1-2 sentences)

With this structure in mind, I will be writing an abstract on the topic 'Ethical Implications of Facial Recognition Technology in Public Surveillance'. To assist me, I will be using WPS Writer as my writing tool because it not only provides me with the necessary editing tools for writing my research paper but also utilizes WPS AI to save time and enhance the meaning of my abstract.

Problem Statement

So first of all, in an abstract, we have the Problem Statement. A problem statement, or research gap, serves as a concise description of the issue or challenge addressed in the research. Students and researchers often end up writing line after line when discussing the research gap, although just 1-2 lines will suffice.

Let's take a look at the draft I have written for the problem statement on WPS Writer.

To shorten this problem statement effectively while ensuring it describes the issue concisely, I'll use WPS AI for assistance. Here's how:

Step 1: Highlight the problem statement using your mouse.

Step 2: After highlighting the text, you will see a floating menu with quick edit tools. Click on the "WPS AI" icon.

Step 3: Upon clicking the WPS AI icon, a list of WPS AI options will appear. Select "Make Shorter".

Step 4: WPS AI will process the text, and once shortened, review it. If satisfactory, click “Replace”; otherwise, opt for “Rewrite” to refine further.

Step 5: With the problem statement shortened, I'll add a human touch by making final adjustments before moving to the next part of our abstract.

Methodology

Next up, we need to discuss the methods used during our research. This includes outlining the specific techniques, procedures, or approaches employed to gather data and analyze findings, ensuring transparency and replicability in scholarly work.

And now, with the help of WPS AI, I'll be shortening my methodology statement to make it more concise and fit my abstract.

Ensure to review any changes made because WPS AI is a writing assistant designed to help you write better, but reviewing is critical to ensure the end result meets your expectations.

After discussing the methodology, we present the results of our research. This section summarizes the key findings and outcomes obtained through the applied methods, providing a clear picture of what was discovered or achieved.

Similar to other sections, I have created a rough draft of my research findings, which I believe are important to include in my abstract.

Now with the assistance of WPS AI, I can further condense my draft. Remember, results can be a bit longer compared to other sections of our abstract, so I'll aim for 2-3 sentences to maintain relevance.

Significance

Finally, we need to discuss the significance of our research and its contributions to the field. This involves explaining how our findings will impact the topic of research and provide a foundation for future studies.

With my significance statement further shortened using WPS AI, I now have my complete abstract statement totaling over 220 words, providing a brief overview of my entire research.

Once you have completed writing your abstract, the next step is to include keywords—a crucial element in learning how to write an abstract for a project or research paper in APA style. When publishing your paper, it's essential to include these keywords at the end of the abstract.

They should highlight important aspects of your research, aiding readers in finding your paper during literature searches. APA Style guidelines specify the formatting rules for these keywords, ensuring consistency and clarity in scholarly publications.

Place keywords directly below the abstract.

Indent the first line of keywords by 0.5 inches.

Use an italicized heading for "Keywords:"

Separate each keyword with a comma and maintain standard font style for keywords.

Remember, the abstract is written once the entire research paper has been completed, so it is the final step before you submit your research paper for publication or to your college professor.

When inputting keywords, think from a reader's perspective about what they are searching for, and include those search terms as your keywords.

While writing your abstract, remember that your research findings are already completed, so the abstract is always in the present or past simple tense.

Avoid delving deeply into the problem when describing your problem statement.

Use verbs like "investigate, test, analyze, evaluate, calculate" to describe the purpose of your research.

In the results section, highlight the most important findings because sometimes research findings are extensive and it might leave you confused about which ones to include.

Mention any limitations encountered during your research.

Bonus Tips: How to Perfect your Abstract with WPS AI

When crafting your essay with WPS AI, you're setting yourself up for success. WPS AI offers a suite of tools designed to elevate your writing to new heights, ensuring your paper is not only well-written but also perfectly formatted and crystal clear. Whether you're brainstorming ideas or fine-tuning your final draft, WPS AI is your comprehensive writing assistant.

Content Generation and Idea Formation:

WPS AI aids in generating and refining ideas, helping you structure your thoughts cohesively. It provides guidance on developing strong arguments and organizing your essay logically, ensuring your content flows smoothly.

Grammar and Style Correction:

WPS AI acts as a meticulous proofreader, detecting and correcting grammatical errors, punctuation mistakes, and stylistic inconsistencies. It ensures your writing adheres to standard grammar rules and enhances readability.

Coherence Enhancement:

Beyond surface-level corrections, WPS AI enhances the coherence of your writing. It identifies areas where transitions between paragraphs or ideas could be smoother, ensuring your paper maintains a clear and logical progression of thought.

Clarity Check:

Clarity is paramount in effective writing. WPS AI evaluates the clarity of your sentences and paragraphs, suggesting improvements to eliminate ambiguity and enhance understanding. It helps refine your tone and ensures your message is conveyed effectively to your audience.

Formatting Assistance:

Formatting can often be a tedious task. WPS AI automates the process, ensuring your paper meets the required formatting guidelines effortlessly. Whether it's APA, MLA, Chicago, or any other style, WPS AI ensures your paper looks polished and professional.

Real-time Feedback and Iterative Improvement:

As you write, WPS AI provides real-time feedback, offering suggestions for improvement as you draft your essay. This iterative process allows you to refine your writing continuously, incorporating feedback on the go.

FAQs about writing an abstract for paper

1. is it necessary for an abstract to adhere to a standard structure.

No, an abstract does not always need to follow a standard structure. While a standard format offers familiarity, focusing on the most compelling aspects of your research is crucial. Here are some key points to keep in mind:

Significant Discoveries: If your research unveils groundbreaking results, prioritizing these can immediately capture attention, even if it diverges slightly from the traditional structure.

Innovative Method: Highlighting a fresh or distinct approach from the outset can captivate readers interested in your research methodology.

2. Does the use of technical jargon in an Abstract enhance the reader's comprehension?

Using too much technical language in an abstract usually doesn't help readers. Here's why it might cause trouble:

Excludes Readers: An excessive use of jargon can create a barrier, potentially alienating readers who could otherwise benefit from your research.

Hides Important Ideas: Sometimes, technical language makes it hard to understand your thoughts clearly. Utilizing clear and everyday language enhances your ability to communicate complex ideas effectively.

When to Incorporate Technical Language:

Clarify Terms: If technical terms are necessary, provide clear explanations upon their initial use.

Maintain Balance: Strive for clarity while demonstrating proficiency in the technical vocabulary of your field.

3. When should I write the Abstract?

Once you've finished your research, write the abstract as the final step. This allows you to concisely summarize your entire thesis, dissertation, or research paper, capturing all its main points and findings.

4. How long should an Abstract be?

Abstract lengths for theses and dissertations typically range between 200 and 300 words. Many universities enforce strict word limits, so it's crucial to check your institution's specific requirements before submitting your abstract.

Ease Your Academic Life With WPS Office

Writing a paper can be a challenging journey, but when you're creating your abstract, you're figuratively and literally wrapping it up. WPS Office is a great companion to have on this journey. From generating ideas to perfecting your final draft, WPS AI equips you with the tools and guidance on how to write an abstract for paper. It ensures that your essay not only meets academic standards but also stands out for its coherence, clarity, and impeccable presentation. Download WPS Office now and make your academic life easier.

• 1. How to Write A Literature Review - Steps with Examples
• 2. How to Write an Argumentative Essay- Steps with Examples
• 3. How to Write a Hook- Steps With Examples
• 4. How to Write a Call to Action - Steps with Examples
• 5. How to Write a Proposal [ Steps & Examples]
• 6. How to Write A thesis statement - Steps with Examples

15 years of office industry experience, tech lover and copywriter. Follow me for product reviews, comparisons, and recommendations for new apps and software.