dissertation font and size

Thesis and Dissertation Guide

• « Thesis & Dissertation Resources
• The Graduate School Home

• Introduction
• Copyright Page
• Dedication, Acknowledgements, Preface (optional)
• Table of Contents
• List of Tables, Figures, and Illustrations
• List of Abbreviations
• List of Symbols

Non-Traditional Formats

Font type and size, spacing and indentation, tables, figures, and illustrations, formatting previously published work.

• Internet Distribution
• Open Access
• Registering Copyright
• Using Copyrighted Materials
• Use of Your Own Previously Published Materials
• Submission Steps
• Submission Checklist
• Sample Pages

II. Formatting Guidelines

All copies of a thesis or dissertation must have the following uniform margins throughout the entire document:

• Left: 1″ (or 1 1/4" to ensure sufficient room for binding the work if desired)
• Right: 1″
• Bottom: 1″ (with allowances for page numbers; see section on Pagination )
• Top: 1″

Exceptions : The first page of each chapter (including the introduction, if any) begins 2″ from the top of the page. Also, the headings on the title page, abstract, first page of the dedication/ acknowledgements/preface (if any), and first page of the table of contents begin 2″ from the top of the page.

Non-traditional theses or dissertations such as whole works comprised of digital, artistic, video, or performance materials (i.e., no written text, chapters, or articles) are acceptable if approved by your committee and graduate program. A PDF document with a title page, copyright page, and abstract at minimum are required to be submitted along with any relevant supplemental files.

Fonts must be 10, 11, or 12 points in size. Superscripts and subscripts (e.g., formulas, or footnote or endnote numbers) should be no more than 2 points smaller than the font size used for the body of the text.

Space and indent your thesis or dissertation following these guidelines:

• The text must appear in a single column on each page and be double-spaced throughout the document. Do not arrange chapter text in multiple columns.
• New paragraphs must be indicated by a consistent tab indentation throughout the entire document.
• The document text must be left-justified, not centered or right-justified.
• For blocked quotations, indent the entire text of the quotation consistently from the left margin.
• Ensure headings are not left hanging alone on the bottom of a prior page. The text following should be moved up or the heading should be moved down. This is something to check near the end of formatting, as other adjustments to text and spacing may change where headings appear on the page.

Exceptions : Blocked quotations, notes, captions, legends, and long headings must be single-spaced throughout the document and double-spaced between items.

Paginate your thesis or dissertation following these guidelines:

• Use lower case Roman numerals (ii, iii, iv, etc.) on all pages preceding the first page of chapter one. The title page counts as page i, but the number does not appear. Therefore, the first page showing a number will be the copyright page with ii at the bottom.
• Arabic numerals (beginning with 1, 2, 3, 4, etc.) start at chapter one or the introduction, if applicable. Arabic numbers must be included on all pages of the text, illustrations, notes, and any other materials that follow. Thus, the first page of chapter one will show an Arabic numeral 1, and numbering of all subsequent pages will follow in order.
• Do not use page numbers accompanied by letters, hyphens, periods, or parentheses (e.g., 1., 1-2, -1-, (1), or 1a).
• Center all page numbers at the bottom of the page, 1/2″ from the bottom edge.
• Pages must not contain running headers or footers, aside from page numbers.
• If your document contains landscape pages (pages in which the top of the page is the long side of a sheet of paper), make sure that your page numbers still appear in the same position and direction as they do on pages with standard portrait orientation for consistency. This likely means the page number will be centered on the short side of the paper and the number will be sideways relative to the landscape page text. See these additional instructions for assistance with pagination on landscape pages in Microsoft Word .

Format footnotes for your thesis or dissertation following these guidelines:

• Footnotes must be placed at the bottom of the page separated from the text by a solid line one to two inches long.
• Begin at the left page margin, directly below the solid line.
• Single-space footnotes that are more than one line long.
• Include one double-spaced line between each note.
• Most software packages automatically space footnotes at the bottom of the page depending on their length. It is acceptable if the note breaks within a sentence and carries the remainder into the footnote area of the next page. Do not indicate the continuation of a footnote.
• Number all footnotes with Arabic numerals. You may number notes consecutively within each chapter starting over with number 1 for the first note in each chapter, or you may number notes consecutively throughout the entire document.
• Footnote numbers must precede the note and be placed slightly above the line (superscripted). Leave no space between the number and the note.
• While footnotes should be located at the bottom of the page, do not place footnotes in a running page footer, as they must remain within the page margins.

Endnotes are an acceptable alternative to footnotes. Format endnotes for your thesis or dissertation following these guidelines:

• Always begin endnotes on a separate page either immediately following the end of each chapter, or at the end of your entire document. If you place all endnotes at the end of the entire document, they must appear after the appendices and before the references.
• Include the heading “ENDNOTES” in all capital letters, and center it 1″ below the top of the first page of your endnotes section(s).
• Single-space endnotes that are more than one line long.
• Number all endnotes with Arabic numerals. You may number notes consecutively within each chapter starting over with number 1 for the first note in each chapter, or you may number notes consecutively throughout the entire document.
• Endnote numbers must precede the note and be placed slightly above the line (superscripted). Leave no space between the number and the note.

Tables, figures, and illustrations vary widely by discipline. Therefore, formatting of these components is largely at the discretion of the author.

For example, headings and captions may appear above or below each of these components.

These components may each be placed within the main text of the document or grouped together in a separate section.

Space permitting, headings and captions for the associated table, figure, or illustration must be on the same page.

The use of color is permitted as long as it is consistently applied as part of the finished component (e.g., a color-coded pie chart) and not extraneous or unprofessional (e.g., highlighting intended solely to draw a reader's attention to a key phrase). The use of color should be reserved primarily for tables, figures, illustrations, and active website or document links throughout your thesis or dissertation.

The format you choose for these components must be consistent throughout the thesis or dissertation.

Ensure each component complies with margin and pagination requirements.

Refer to the List of Tables, Figures, and Illustrations section for additional information.

If your thesis or dissertation has appendices, they must be prepared following these guidelines:

• Appendices must appear at the end of the document (before references) and not the chapter to which they pertain.
• When there is more than one appendix, assign each appendix a number or a letter heading (e.g., “APPENDIX 1” or “APPENDIX A”) and a descriptive title. You may number consecutively throughout the entire work (e.g., 1, 2 or A, B), or you may assign a two-part Arabic numeral with the first number designating the chapter in which it appears, separated by a period, followed by a second number or letter to indicate its consecutive placement (e.g., “APPENDIX 3.2” is the second appendix referred to in Chapter Three).
• Include the chosen headings in all capital letters, and center them 1″ below the top of the page.
• All appendix headings and titles must be included in the table of contents.
• Page numbering must continue throughout your appendix or appendices. Ensure each appendix complies with margin and pagination requirements.

You are required to list all the references you consulted. For specific details on formatting your references, consult and follow a style manual or professional journal that is used for formatting publications and citations in your discipline.

Your reference pages must be prepared following these guidelines:

• If you place references after each chapter, the references for the last chapter must be placed immediately following the chapter and before the appendices.
• If you place all references at the end of the thesis or dissertation, they must appear after the appendices as the final component in the document.
• Select an appropriate heading for this section based on the style manual you are using (e.g., “REFERENCES”, “BIBLIOGRAPHY”, or “WORKS CITED”).
• Include the chosen heading in all capital letters, and center it 1″ below the top of the page.
• References must be single-spaced within each entry.
• Include one double-spaced line between each reference.
• Page numbering must continue throughout your references section. Ensure references comply with margin and pagination requirements.

In some cases, students gain approval from their academic program to include in their thesis or dissertation previously published (or submitted, in press, or under review) journal articles or similar materials that they have authored. For more information about including previously published works in your thesis or dissertation, see the section on Use of Your Own Previously Published Materials and the section on Copyrighting.

If your academic program has approved inclusion of such materials, please note that these materials must match the formatting guidelines set forth in this Guide regardless of how the material was formatted for publication.

Some specific formatting guidelines to consider include:

• Fonts, margins, chapter headings, citations, and references must all match the formatting and placement used within the rest of the thesis or dissertation.
• If appropriate, published articles can be included as separate individual chapters within the thesis or dissertation.
• A separate abstract to each chapter should not be included.
• The citation for previously published work must be included as the first footnote (or endnote) on the first page of the chapter.
• Do not include typesetting notations often used when submitting manuscripts to a publisher (i.e., insert table x here).
• The date on the title page should be the year in which your committee approves the thesis or dissertation, regardless of the date of completion or publication of individual chapters.
• If you would like to include additional details about the previously published work, this information can be included in the preface for the thesis or dissertation.

Previous: Order and Components

Next: Distribution

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base

Dissertation layout and formatting

Published on October 21, 2015 by Koen Driessen . Revised on February 20, 2019.

The layout requirements for a dissertation are often determined by your supervisor or department. However, there are certain guidelines that are common to almost every program, such as including page numbers and a table of contents.

If you are writing a paper in the MLA citation style , you can use our  MLA format guide .

Table of contents

Font, font size, and line spacing, tables and figures, referencing, paragraph marks, headers and footers, page numbering, dissertation printing.

Use a clear and professional font. Some examples include Verdana, Times New Roman, and Calibri (which is the default font in Microsoft Word). Font size is best set to 10 or 11.

In scientific articles and theses, a line spacing of 1.15 or 1.5 is generally preferred, as it makes the document more readable and enables your supervisor to post comments between the lines of text.

Receive feedback on language, structure, and formatting

Professional editors proofread and edit your paper by focusing on:

• Academic style
• Vague sentences
• Style consistency

See an example

With tables, the number and title should be placed above; with figures and all other illustrations, the number and title should be placed below.

Microsoft Word has a feature that can help you to automatically place these numbers and titles in the correct position. Select the graphic, right-click, and choose “Insert Caption…” In the dialogue box that appears, specify whether it is a table or figure and enter a title. Once you click “Okay,” the number and the title will be generated in the right place.

Another advantage of using this Word feature to label your graphics is that you will later be able to generate lists of tables and figures with a push of a button.

Different heading styles are frequently used to help the reader differentiate between chapters, sections, and subsections of your dissertation. For instance, you may choose to bold all chapter headings but to italicize all lower-level headings.

Once you decide on the scheme you will use, it is important that you apply it consistently throughout your entire dissertation. Using the “Styles” feature of Microsoft Word can be very helpful in this regard. After you have created a heading, just highlight it and select a style (such as Heading 1 or Heading 2) from the home tool bar. Keeping a list may help you keep track of what style to use when.

Citing sources in a correct and appropriate manner is crucial in a dissertation, as failing to do so can make you guilty of plagiarism . It is important that these references follow certain standards.

The APA standard is most commonly used. After realizing how difficult it is to create correctly formatted citations manually, we developed the APA Citation Generator  to assist you. You can use this free and simple tool to easily generate citations that follow the official APA style.

We also recommend that you use a plagiarism scanner to check for unintended plagiarism.

Prevent plagiarism. Run a free check.

Using the “Show paragraph marks” feature can help you to avoid this scenario. To turn it on, click on the paragraph symbol in your home tool bar (as shown in the above illustration). A black paragraph symbol will then be shown after every paragraph and “hard return” in your document, which allows you to see how the layout is constructed.

This can be very helpful when you are trying to determine the cause of mysterious jumps and other problems.

Headers and footers can give your dissertation a very professional look. They also make it immediately clear to readers what document is before them.

A header or footer can be added by double-clicking respectively at the top or bottom of a page in your document. There are generally no firm rules about what you must include; the following are common choices:

• The name/logo of your home educational institution
• The name/logo of the company or organization where you completed a placement
• The title of your dissertation (which may be shortened if necessary)
• Page numbers

Page numbers are commonly placed in the lower right-hand corner of the page. They can easily be added by simply creating a footer. Bear in mind that a page number is usually not included on the title page of a dissertation.

• To ensure that the page numbering doesn’t start on the cover page, but the numbering begins on page 1, place the cursor on the bottom of the page where you want to start with page numbering (if you want to start on page 2, click at the bottom of the first page).
• Next go to “Page layout” and then “Breaks”. Next, choose the submenu “Next page”.
• Switch to the side, where the numbering should begin (in this case, page 2). In the edit mode of the header or footer, choose “link to previous”, after that click on “Move to footer” and click on the “Link to previous” again.
• Now, to add a page number, click on the “Insert” tab, then on the “Header and footer” group, and then click “Page number”. Now you can also choose where the page number should be (top of the page, bottom of the page or page margins) and you can choose a design.
• Finally select the option “format page number” and enter the page numbers, in what page you want the numbering to begin. After you have pressed “ok”, the page number then begins with the number from the previously selected break.

A clear and well-presented title page is a nice finishing touch for your dissertation. Certain information should be included here by default. We have prepared a separate article on title pages that includes a handy checklist you can use to make sure you don’t forget anything.

Always make sure that everything in your dissertation is in the correct order and placed in the appropriate chapter. More information on how to put your document together can be found in our article on structure a dissertation .

If you are interested in seeing how other students have tackled preparing their theses, you may find it useful to check out these dissertation examples .

The last step is usually to prepare a hardcopy of your final document. There are many issues to think about, such as whether you will make it single- or double-sided.

Before you print, however, we recommend that you check one last time that your document meets all of the below requirements!

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

Driessen, K. (2019, February 20). Dissertation layout and formatting. Scribbr. Retrieved August 26, 2024, from https://www.scribbr.com/tips/dissertation-layout-and-formatting/

Is this article helpful?

Koen Driessen

Get unlimited documents corrected.

✔ Free APA citation check included ✔ Unlimited document corrections ✔ Specialized in correcting academic texts

• Formatting Your Dissertation
• Introduction

Harvard Griffin GSAS strives to provide students with timely, accurate, and clear information. If you need help understanding a specific policy, please contact the office that administers that policy.

• Application for Degree
• Credit for Completed Graduate Work
• Ad Hoc Degree Programs
• Acknowledging the Work of Others
• Dissertation Advisory Committee
• Publishing Options
• Subject, Invention, and Patents
• Submitting Your Dissertation
• English Language Proficiency
• PhD Program Requirements
• Secondary Fields
• Year of Graduate Study (G-Year)
• Master's Degrees
• Grade and Examination Requirements
• Conduct and Safety
• Financial Aid
• Non-Resident Students
• Registration
• Residence Halls
• Student Groups

When preparing the dissertation for submission, students must meet the following minimum formatting requirements. The Registrar’s Office will review the dissertation for compliance and these formatting elements and will contact the student to confirm acceptance or to request revision. The Harvard Griffin GSAS resource on dissertation formatting best practices expands on many of the elements below.

Please carefully review your dissertation before submitting it to ProQuestETD. The Registrar’s Office will email you through ProQuest if they have identified major formatting errors that need correction. Students will be provided with a brief extended deadline to make only the requested formatting updates.  

• Embedded Fonts : If fonts are not embedded, non-English characters may not appear as intended. It is the student’s responsibility to make sure that fonts are embedded properly prior to submission. Instructions for embedding fonts can be found on the Dissertation Formatting Guidance resource .  
• Thesis Acceptance Certificate: A copy of the Thesis Acceptance Certificate (TAC) should appear as the first page. This page should not be counted or numbered. The TAC will appear in the online version of the published dissertation. The author name and date on the TAC and title page should be the same.  
• Title Page: The dissertation begins with the title page; the title should be as concise as possible and should provide an accurate description of the dissertation. The author name and date on the TAC and title page should be the same. Do not print a page number on the title page. It is understood to be page  i  for counting purposes only. 
• Abstract : An abstract, numbered as page  iii , should immediately follow the copyright page and should state the problem, describe the methods and procedures used, and give the main results or conclusions of the research. The abstract will appear in the online version of the dissertation and will be made available by ProQuest and DASH. There is no maximum word count for the abstract.  
• Preliminary pages (abstract, table of contents, list of tables, graphs, illustrations, and preface) should use small Roman numerals (i, ii, iii, iv, v, etc.). 
• All pages must contain text or images.  
• Count the title page as page i and the copyright page as page ii, but do not print page numbers on either page. 
• For the body of text, use Arabic numbers (1, 2, 3, 4, 5, etc.) starting with page 1 on the first page of text.
• Page numbers must be centered throughout the manuscript at the top or bottom. 
• Every numbered page must be consecutively ordered, including tables, graphs, illustrations, and bibliography/index (if included); letter suffixes (such as 10a, 10b, etc.) are not allowed. 
• It is customary not to have a page number on the page containing a chapter heading. Check pagination carefully. Account for all pages. 
• Copyright Statement: A copyright notice should appear on a separate page immediately following the title page and include the copyright symbol ©, the year of first publication of the work, and the name of the author: © [ year ] [ Author’s Name ]. All rights reserved. Alternatively, students may choose to license their work openly under a Creative Commons license. The author remains the copyright holder while at the same time granting upfront permission to others to read, share, and—depending on the license—adapt the work so long as proper attribution is given. (If a student chooses a Creative Commons license, the copyright statement must not include the “all rights reserved” disclaimer and should instead indicate the specific Creative Commons license.) Please note: The copyright statement applies only to the student’s own work; the copyright status of third-party material incorporated into the dissertation will not change. Do not  print a page number on the copyright page. It is understood to be page  ii  for counting purposes only. 
• Abstract 
• Table of Contents 
• Front Matter 
• Body of Text 
• Back Matter 

Students can refer to the resource on Dissertation Formatting Best Practice Resource for information on best practices for front and back matter

Individual academic programs may require additional formatting elements to meet the standards of a specific field or discipline. Students are responsible to ensure that their Dissertation Advisory Committee is in support of the final formatting as signified by the sign off on the Thesis Acceptance Certificate. Any deviation from these requirements may lead to rejection of the dissertation and delay in the conferral of the degree. 

CONTACT INFO

Katie riggs, academic programs, explore events.

• KU Libraries
• Subject & Course Guides
• KU Thesis and Dissertation Formatting
• Fonts and Spacing

KU Thesis and Dissertation Formatting: Fonts and Spacing

• Formatting Specifics
• Title and Acceptance Pages
• Page Numbering
• Table of Contents
• List of Figures
• Rotating Charts or Tables
• Working with Footnotes
• Converting to PDF
• Embedding Fonts
• Completed KU Dissertations & Theses
• About: Survey of Earned Doctorates
• Copyright and ETD Release Form
• Resources for KUMC Students
• Thesis/Dissertation Filenames
• LaTeX/BibTeX Support

Office of Graduate Studies Thesis and Dissertation Formatting Guidelines

These rules are taken from the KU Office of Graduate Studies Thesis or Dissertation Formatting Guidelines. To see the full thesis or dissertation formatting requirements, visit https://graduate.ku.edu/submitting

• Students should use the same font size (11- or 12-point) and style (typically Times New Roman) through the thesis, including labels and references.
• Tables, captions, and footnotes should use the same font style but may be smaller in size (usually 10-point).
• Chapter and section headings may be bold and no more than 2 points larger than the text size.
• Non-standard typefaces, such as script, are generally not acceptable except for commonly used symbols.
• The Office of Graduate Studies recommends that students get their font choice approved by their department and their graduate division before the thesis defense.
• Lettering and symbols in tables and figures should be no less than 10 points.
• Normally theses and dissertations use double-spaced formatting.
• Single-spaced formatting is acceptable in the table of contents, footnotes, end notes, charts, graphs, tables, block quotations, captions, glossary, appendices and bibliography.
• Students may use singe- or one-and-a-half-spacing for the body of the text with prior written approval of their thesis committee and graduate division.

Subject Guide

• << Previous: Title and Acceptance Pages
• Next: Page Numbering >>
• Last Updated: May 9, 2024 9:48 AM
• URL: https://guides.lib.ku.edu/etd

• Langson Library
• Science Library
• Grunigen Medical Library
• Law Library
• Connect From Off-Campus
• Accessibility
• Gateway Study Center

Email this link

Thesis / dissertation formatting manual (2024).

• Filing Fees and Student Status
• Submission Process Overview
• Electronic Thesis Submission
• Paper Thesis Submission
• Formatting Overview
• Fonts/Typeface
• Pagination, Margins, Spacing
• Paper Thesis Formatting
• Preliminary Pages Overview
• Copyright Page
• Dedication Page
• Table of Contents
• List of Figures (etc.)
• Acknowledgments
• Text and References Overview
• Figures and Illustrations
• Using Your Own Previously Published Materials
• Using Copyrighted Materials by Another Author
• Open Access and Embargoes
• Copyright and Creative Commons
• Ordering Print (Bound) Copies
• Tutorials and Assistance
• FAQ This link opens in a new window

Selecting a font (typeface)

Be consistent in the use of font/typeface throughout your manuscript. All text material must be in the same font/typeface; all headings and figure/table titles/captions must be in a consistent typeface.

Please select a font, size, and color that are highly legible and will reproduce clearly. Ornate or decorative fonts such as script, calligraphy, gothic, italics, or specialized art fonts are not acceptable. For electronic submissions, embedded fonts are required.

Any symbols, equations, figures, drawings, diacritical marks, or lines that cannot be typed, and therefore are drawn, must be added in permanent black ink.

Below are suggested fonts and sizes.

Establish and follow a consistent pattern for layout of all headings.  All headings should use the same font size, font weight, typeface, etc.

For example: center all major headings; place secondary headings at least two lines below major headings.

Typeface/printing quality (paper submissions only)

If you are submitting your manuscript on paper, printer quality is critical to produce a clean, clear image. You are strongly urged to use a laser printer, as ink jet and line printers generally do not produce fully clear, legible results. Dot matrix-type printers are not acceptable.

• << Previous: Formatting Overview
• Next: Pagination, Margins, Spacing >>
• Last Updated: Aug 26, 2024 11:00 AM
• URL: https://guides.lib.uci.edu/gradmanual

Off-campus? Please use the Software VPN and choose the group UCIFull to access licensed content. For more information, please Click here

Software VPN is not available for guests, so they may not have access to some content when connecting from off-campus.

/images/cornell/logo35pt_cornell_white.svg" alt="dissertation font and size"> Cornell University --> Graduate School

Formatting requirements.

Requirements for format and final production of the dissertation and thesis, as specified below, meet UMI standards and American Library Association (ALA) suggestions for preserving archival copies of the dissertation and thesis.

1. Language

The dissertation or thesis must be written in English.

2. Page Size and Specifications

• Page size must be 8.5 x 11 inches (or 216 x 279 millimeters), also known as “letter” size in U.S. standards. (ISO standard paper sizes, such as A4, are not allowed.)
• The inclusion of oversized pages or sheets of paper larger than 8.5 x 11 inches (known as “foldouts”) is discouraged. When necessary, 11 x 17 inch pages may be used for large tables, illustrations, etc.
• Text must be embedded, 11-point or larger font.
• Smaller font size may be appropriate for footnotes or other material outside of the main text.
• Black text is recommended; although, color may be appropriate in some limited parts of the document.
• Font requirements apply to all text, including captions, footnotes, citations, etc.

Margins should be at least 1 inch with page numbers at least 3/4 inch from the edge of the page. The templates use 1.6 inches for the left margin and 1.1 inches for the right.

Document must be double-spaced with the exception of quotations as paragraphs, captions, lists, graphs, charts, footnotes/endnotes, bibliographic entries, items within tables, and lists in appendices.

Exceptions may include the following:

• Quotations and footnotes may be single-spaced within each entry.
• Lengthy tables may be single-spaced.
• Irregular spacing may be used to accommodate poetry or other creative writing.

Tables should be consecutively numbered.

Figures should be consecutively numbered.

Format Requirements for Your Dissertation or Thesis

Main navigation.

The final dissertation or thesis manuscript must have a ready-for-publication appearance and standard features.

The Office of the University Registrar does not endorse or verify the accuracy of any dissertation or thesis formatting templates that may be available to you.

It is your student responsibility to make sure that the formatting meets these requirements. Introductory material, text, and appendices must all be clearly and consistently prepared and must meet all of the specifications outlined below.

Once you upload and submit your dissertation or thesis in Axess, and it has been approved by the university, the submission is considered final and no further changes are permitted.

The digital file of the dissertation or thesis, which is sent to Stanford Libraries for cataloging, must meet certain technical requirements to ensure that it can be easily accessed by readers now and into the future. 

Follow the specifications outlined below.

Style and Format

Word and text divisions, style guides, content and layout, special instructions for d.m.a. students, order and content, page orientation, embedded links, supplementary material and publishing, supplementary material, scholarly reference, published papers and multiple authorship, use of copyrighted material, copyrighting your dissertation, file security and file name, stanford university thesis & dissertation publication license.

Pages should be standard U.S. letter size (8.5 x 11 inches).

In order to ensure the future ability to render the document, standard fonts must be used. 

For the main text body, type size should be 10, 11, or 12 point. Smaller font sizes may be used in tables, captions, etc. 

The font color must be black. 

Font Families

Acceptable font styles include:

• Times New Roman (preferred)
• Courier, Courier Bold, Courier Oblique, Courier Bold-Oblique;
• Helvetica, Helvetica Bold, Helvetica Oblique, Helvetica Bold-Oblique;
• Times, Times Bold, Times Italic, Times Bold-Italic;
• Computer Modern (or Computer Modern Roman).

Note: Do not use script or ornamental fonts. Do not use proprietary fonts.

If you use mathematical or other scientific notation in your dissertation or thesis using a font other than Symbol, you must embed the font into the PDF that is submitted to the university. 

Inner margins (left edge if single-sided; right edge for even-numbered pages, and left edge for odd-numbered pages if double-sided) must be 1.5 inches. All other margins must be one inch.

Pagination, headers, and/or footers may be placed within the margin, but no closer than one-half inch from the edge of the page.

For double-sided copies, 1.5 inches must be maintained as the inner margin. Margin requirements should apply to the entire document, including the title page.

The main body text of the manuscript should be one-and-a-half or double-spaced lines, except where conventional usage calls for single spacing, such as footnotes, indented quotations, tables, appendices, etc.

Words should be divided correctly at the end of a line and may not be divided from one page to the next. Use a standard dictionary to determine word division. 

Avoid short lines that end a paragraph at the top of a page, and any heading or subheading at the bottom of a page that is not followed by text.

The dissertation and thesis must be in English. 

Language Exceptions for Dissertations Only

Approval for writing the dissertation in another language is normally granted only in cases where the other language or literature in that language is also the subject of the discipline. 

Exceptions are granted by the school dean upon submission of a written request from the chair of your major department. Approval is routinely granted for dissertations in the Division of Literature, Cultures, and Languages within department specifications.

Prior to submitting in Axess, you must send a copy of the approval letter (or email message chain) from the department dean to [email protected]    

Dissertations written in another language must include an extended summary in English (usually 15 to 20 pages in length). In this case, you should upload your English summary as a supplemental file, during Step 4 of the online submission process.

Select a standard style approved by your department or dissertation advisor and use it consistently. 

Some reliable style guides are:

• K.A. Turabian’s A Manual for Writers of Term Papers, 
• Theses and Dissertations (University of Chicago Press), and 
• the MLA Handbook for Writers of Research Papers, Theses, and Dissertations (Modern Language Association).

If you are a student in the Doctor of Musical Arts program, you may submit musical scores formatted at 11 x 17 inches in size. 

If you are submitting a performance as your dissertation, submit the audio file in WAV format as a supplemental file. 

Note: The maximum file size accepted for submission is 100 MB. If a performance recording exceeds the maximum file size, break the file into multiple files and submit the parts individually as supplemental files.

Your dissertation or thesis must contain the following sections. All sections must be included in a single digital file for upload.

• Title Page — The format must be followed exactly. View these title page examples for Ph.D. Dissertation and this title page sample for an Engineer Thesis . Use uppercase letters. The title of the dissertation or thesis should be a meaningful description of the content of the manuscript. Use word substitutes for formulas, symbols, superscripts, subscripts, Greek letters, etc. The month and year must be the actual month and year in which you submit your dissertation or thesis electronically to the university. (Note: A student who submits in Autumn quarter is conferred his/her degree in the following calendar year.)
• Copyright Page — The dissertation or thesis PDF uploaded in Axess should not contain a copyright page. The copyright page will be created automatically by the online submission system and inserted into the file stored by Stanford Libraries.
• Signature Page — The dissertation or thesis PDF uploaded in Axess should also not contain a signature page. The submission process has moved away from ink-signatures, so a digital facsimile of the signature page will be created automatically by the online submission system and inserted into the dissertation or thesis in its final format stored by Stanford Libraries.
• Abstract — An abstract may be included in the preliminary section of the dissertation or thesis. The abstract in the body of the dissertation or thesis follows the style used for the rest of the manuscript and should be placed following the signature page. There is no maximum permissible length for the abstract in the dissertation or thesis.    Dissertation authors must enter an abstract using the online submission form for uploading the digital dissertation or thesis file to the library. This abstract, which will be indexed for online searching, must be formatted in plain text (no HTML or special formatting). It should be a pithy and succinct version of the abstract included in the dissertation or thesis itself.
• Preface, an Acknowledgment, or a Dedication.   This is optional.
• Table of Contents – Include page references.
• List of Tables –  Include titles and page references. This list is optional.
• List of Illustrations – Include titles and page references. This list is optional
• Introduction/Main body – Include suitable, consistent headings for the larger divisions and more important sub-divisions.
• Appendices.   This is optional.
• Bibliography or List of References.

Except for the title page, which counts as 'i' but is not physically numbered, each page of the manuscript, including all blank pages, pages between chapters, pages with text, photographs, tables, figures, maps, or computer code must be assigned a number. 

Consistent placement of pagination, at least one-half inch from the paper’s edge, should be used throughout the manuscript.

Follow these pagination instructions exactly:

• For the preliminary pages, use small Roman numerals (e.g., iv, v, vi).
• The title page is not physically numbered, but counts as page i.
• Keep in mind that a copyright page ii and augmented signature page iii (based off your student record) will automatically be inserted to your manuscript during submission.  This means you must ensure to remove pages ii and iii from your dissertation or thesis.
• Failing to remove pages ii and iii is most common formatting mistake: you must remove your copyright page ii and signature page iii from the pdf file before you submit your dissertation or thesis, and begin pagination on your abstract with page number "iv". If the document is formatted for double-sided printing with each section starting on the right page, then pagination will begin on a blank page (page"iv") and the Abstract should be numbered as page "v", and so forth.
• For the remainder of the manuscript, starting with the Introduction or Chapter 1 of the Main Body, use continuous Arabic pagination only (1, 2, 3, etc) for text, illustrations, images, appendices, and the bibliography. Remember to start with Arabic numbered page 1, as this is not a continuation of the Roman numeral numbering from the preliminary pages.
• The placement of page numbers should be consistent throughout the document.

For text, illustrations, charts, graphs, etc., printed in landscape form, the orientation should be facing away from the bound edge of the paper.

Images (color, grayscale, and monochrome) included in the dissertation or thesis should be clearly discernible both on screen and when printed. The dimensions should not exceed the size of the standard letter-size page (8.5” x 11”).

Image resolution should be 150 dots per inch (dpi), though resolutions as low as 72 dpi (and no lower) are acceptable. 

The format of images embedded in the PDF should be JPEG or EPS (the format JPEG2000 is also acceptable when it is supported in future versions of the PDF format). GIF and PNG are not preferred image file formats.

Large images, including maps and charts or other graphics that require high resolution, should not be included in the main dissertation or thesis file. Instead, they can be submitted separately as supplemental files and formatted in other formats as appropriate. 

Multimedia, such as audio, video, animation, etc., must not be embedded in the body of the dissertation or thesis. These media types add size and complexity to the digital file, introducing obstacles to users of the dissertation or thesis who wish to download and read (and “play back”) the content, and making it more difficult to preserve over time.

If you wish to include multimedia with your submission, upload the media separately as a stand-alone file in an appropriate media format. See Supplementary Material section below.

It is acceptable to include “live” (i.e., clickable) web URLs that link to online resources within the dissertation or thesis file. Spell out each URL in its entirety (e.g., http://www.stanford.edu ) rather than embedding the link in text (e.g., Stanford homepage ). By spelling out the URL, you improve a reader’s ability to understand and access the link reference.

Supplementary material may be submitted electronically with the dissertation or thesis. This material includes any supporting content that is useful for understanding the dissertation or thesis, but is not essential to the argument. It also covers core content in a form that can not be adequately represented or embedded in the PDF format, such as an audio recording of a musical performance.

Supplementary materials are submitted separately than the dissertation or thesis file, and are referred to as supplemental files.

A maximum of twenty supplemental files can be submitted. There are no restrictions on the file formats. The maximum file size is 1 GB.

You are encouraged to be judicious about the volume and quality of the supplemental files, and to employ file formats that are widely used by researchers generally, if not also by scholars of the discipline.

The following table outlines recommended file formats for different content types. By following these recommendations, the author is helping to ensure ongoing access to the material.

After uploading each supplemental file, it is important to enter a short description or label (maximum 120 characters for file name and the description). This label will be displayed to readers in a list of the contents for the entire submission.

If copyrighted material is part of the supplementary material, permission to reuse and distribute the content must be obtained from the owner of the copyright. Stanford Libraries requires copies of permission letters (in PDF format) to be uploaded electronically when submitting the files, and assumes no liability for copyright violations. View this sample permission letter .

System restrictions allow for a maximum of 10 individually uploaded permission files. If you have more than 10 permission files we recommend combining all permission letters into a single PDF file for upload.

In choosing an annotation or reference system, you should be guided by the practice of your discipline and the recommendations of your departments. In addition to the general style guides listed in the Style section above, there are specific style guides for some fields. When a reference system has been selected, it should be used consistently throughout the dissertation or thesis. The placement of footnotes is at your discretion with reading committee approval.

An important aspect of modern scholarship is the proper attribution of authorship for joint or group research. If the manuscript includes joint or group research, you must clearly identify your contribution to the enterprise in an introduction.

The inclusion of published papers in a dissertation or thesis is the prerogative of the major department. Where published papers or ready-for-publication papers are included, the following criteria must be met:

• There must be an introduction that integrates the general theme of the research and the relationship between the chapters. The introduction may also include a review of the literature relevant to the dissertation or thesis topic that does not appear in the chapters.
• Multiple authorship of a published paper should be addressed by clearly designating, in an introduction, the role that the dissertation or thesis author had in the research and production of the published paper. The student must have a major contribution to the research and writing of papers included in the dissertation or thesis.
• There must be adequate referencing of where individual papers have been published.
• Written permission must be obtained for all copyrighted materials. Letters of permission must be uploaded electronically in PDF form when submitting the dissertation or thesis. 
• The published material must be reformatted to meet the university's format requirements (e.g., appropriate margins and pagination) of the dissertation. The Office of the University Registrar will approve a dissertation or thesis if there are no deviations from the normal specifications that would prevent proper dissemination and utilization of the dissertation or thesis. If the published material does not correspond to these standards, it will be necessary for you to reformat that portion of the dissertation or thesis.
• Multiple authorship has implications with respect to copyright and public release of the material. Be sure to discuss copyright clearance and embargo options with your co-authors and your advisor well in advance of preparing your thesis for submission.

If copyrighted material belonging to others is used in your dissertation or thesis or is part of your supplementary materials, you must give full credit to the author and publisher of the work in all cases, and obtain permission from the copyright owner for reuse of the material unless you have determined that your use of the work is clearly fair use under US copyright law (17 USC §107). 

The statute sets out four factors that must be considered when assessing Fair Use:

• the purpose and character of the use, including whether such use is of a commercial nature or is for nonprofit educational purpose;
• the nature of the copyrighted work;
• the amount and substantiality of the portion used in relation to the copyrighted work as a whole; and
• the effect of the use upon the potential market for or value of the copyrighted work.

The Association of American University Presses requires permission for any quotations that are reproduced as complete units (poems, letters, short stories, essays, journal articles, complete chapters or sections of books, maps, charts, graphs, tables, drawings, or other illustrative materials). You can find this guideline and other detailed information on Fair Use at http://fairuse.stanford.edu . 

If you are in doubt, it is safest to obtain permission. Permission to use copyrighted material must be obtained from the owner of the copyright. Stanford Libraries requires copies of permission letters (in PDF format) to be uploaded electronically when submitting the dissertation or thesis, and assumes no liability for copyright violations. For reference, view this sample permission letter .

Copyright protection is automatically in effect from the time the work is in fixed form. A proper copyright statement consisting of the copyright symbol, the author’s name, year of degree conferral, and the phrase “All Rights Reserved” will be added automatically to the dissertation or thesis in its final form.

Registration of copyright is not required, but it establishes a public record of your copyright claim and enables copyright owners to litigate against infringement. You need not register your copyright with the U.S. Copyright Office at the outset, although registration must be made before the copyright may be enforced by litigation in case of infringement. 

Early registration does have certain advantages: it establishes a public record of your copyright claim, and if registration has been made prior to the infringement of your work, or within three months after its publication, qualifies you to be awarded statutory damages and attorney fees in addition to the actual damages and profits available to you as the copyright owner (should you ever have to sue because of infringement).

For more information about copyright, see the Stanford Libraries' resource on Copyright Considerations .

For further information on Registration of Copyright, see https://www.copyright.gov/registration/ .

Do not require a password to make changes to your submitted PDF file, or apply other encryption or security measures. Password-protected files will be rejected.

The file name and description will be printed on a page added to your dissertation or thesis, so choose a file name accordingly.

Important note: File names may only consist of alphanumeric characters, hyphen, underscore, at sign, space, ampersand, and comma – before the ending period and file extension.  Specifically,

• A file name cannot start with a space, period (nor contain a period), underscore, or hyphen.
• Files names must be 120 characters or less.

Here is an example of a filename that is allowed, including all of the possible characters:

• A Study of Social Media with a Focus on @Twitter Accounts, Leland Student_30AUG2023.pdf

In submitting a thesis or dissertation to Stanford, the author grants The Trustees of Leland Stanford Junior University (Stanford) the non-exclusive, worldwide, perpetual, irrevocable right to reproduce, distribute, display and transmit author's thesis or dissertation, including any supplemental materials (the Work), in whole or in part in such print and electronic formats as may be in existence now or developed in the future, to sub-license others to do the same, and to preserve and protect the Work, subject to any third-party release or display restrictions specified by Author on submission of the Work to Stanford.

Author further represents and warrants that Author is the copyright holder of the Work, and has obtained all necessary rights to permit Stanford to reproduce and distribute third-party materials contained in any part of the Work, including use of third-party images, text, or music, as well as all necessary licenses relating to any non-public, third-party software necessary to access, display, and run or print the Work. Author is solely responsible and will indemnify Stanford for any third party claims related to the Work as submitted for publication.

Author warrants that the Work does not contain information protected by the Health Insurance Portability and Accountability Act (HIPAA), the Family Educational Rights and Privacy Act (FERPA), confidentiality agreements, or contain Stanford Prohibited, Restricted or Confidential data described on the University IT website , or other data of a private nature.

Stanford is under no obligation to use, display or host the work in any way and may elect not to use the work for any reason including copyright or other legal concerns, financial resources, or programmatic need.

Graduate School

• Make a Gift

Organizing and Formatting Your Thesis and Dissertation

Learn about overall organization of your thesis or dissertation. Then, find details for formatting your preliminaries, text, and supplementaries.

Overall Organization

A typical thesis consists of three main parts – preliminaries, text, and supplementaries. Each part is to be organized as explained below and in the order indicated below:

1. Preliminaries:

• Title page (required)
• Copyright page (required)
• Abstract (required) only one abstract allowed
• Acknowledgments (optional) located in the Preliminary Section only
• Preface (optional)
• Autobiography (optional)
• Dedication (optional)
• Table of Contents (required)
• List of Tables (optional)
• List of Figures (optional)
• List of Plates (optional)
• List of Symbols (optional)
• List of Keywords (optional)
• Other Preliminaries (optional) such as Definition of Terms

3. Supplementaries:

• References or bibliography (optional)
• Appendices (optional)
• Glossary (optional)
• List of Abbreviations (optional)

Preliminaries

These are the general requirements for all preliminary pages.

• Preliminary pages are numbered with lower case Roman numerals.
• Page numbers are ½” from the bottom of the page and centered.
• The copyright page is included in the manuscript immediately after the title page and is not assigned a page number nor counted.
• The abstract page is numbered with the Roman numeral “ii”.
• The remaining preliminary pages are arranged as listed under “Organizing and Formatting the Thesis/Dissertation” and numbered consecutively.
• Headings for all preliminary pages must be centered in all capital letters 1” from the top of the page.
• Do not bold the headings of the preliminary pages.

A sample Thesis title page pdf is available here ,  and a sample of a Dissertation title page pdf is available here.

Refer to the sample page as you read through the format requirements for the title page.

• Do not use bold.
• Center all text except the advisor and committee information.

The heading “ Thesis ” or “ Dissertation ” is in all capital letters, centered one inch from the top of the page.

• Your title must be in all capital letters, double spaced and centered.
• Your title on the title page must match the title on your GS30 – Thesis/Dissertation Submission Form

Submitted by block

Divide this section exactly as shown on the sample page. One blank line must separate each line of text.

• Submitted by
• School of Advanced Materials Discovery 
• School of Biomedical Engineering
• Graduate Degree Program in Cell and Molecular Biology
• Graduate Degree Program in Ecology

If your department name begins with “School of”, list as:

• School of Education
• School of Music, Theatre and Dance
• School of Social Work

If you have questions about the correct name of your department or degree, consult your department. Areas of Study or specializations within a program are not listed on the Title Page.

Degree and Graduating Term block

• In partial fulfillment of the requirements
• For the Degree of
• Colorado State University
• Fort Collins, Colorado (do not abbreviate Colorado)

Committee block

• Master’s students will use the heading Master’s Committee:
• Doctoral students will use the heading Doctoral Committee:
• The Master’s Committee and Doctoral Committee headings begin at the left margin.
• One blank line separates the committee heading and the advisor section.
• One blank line separates the advisor and committee section.
• Advisor and committee member names are indented approximately half an inch from the left margin.
• Titles before or after the names of your advisor and your members are not permitted (Examples – Dr., Professor, Ph.D.).

Copyright Page

• A sample copyright page pdf is available here.
• A copyright page is required.
• A copyright page is included in the manuscript immediately after the title page.
• This page is not assigned a number nor counted.
• Center text vertically and horizontally.
• A sample abstract page pdf is available here – refer to the sample page as you read through the format requirements for the abstract.
• Only one abstract is permitted.
• The heading “ Abstract ” is in all capital letters, centered one inch from the top of the page.
• Three blank lines (single-spaced) must be between the “ Abstract ” heading and your title.
• Your title must be in all capital letters and centered.
• The title must match the title on your Title Page and the GS30 – Thesis/Dissertation Submission Form
• Three blank lines (single-spaced) must be between the title and your text.
• The text of your abstract must be double-spaced.
• The first page of the abstract is numbered with a small Roman numeral ii.

Table of Contents

• A sample Table of Contents page pdf is available.
• The heading “ Table of Contents ” is in all capital letters centered one inch from the top of the page.
• Three blank lines (single-spaced) follow the heading.
• List all parts of the document (except the title page) and the page numbers on which each part begins.
• The titles of all parts are worded exactly as they appear in the document.
• Titles and headings and the page numbers on which they begin are separated by a row of dot leaders.
• Major headings are aligned flush with the left margin.
• Page numbers are aligned flush with the right margin.

The text of a thesis features an introduction and several chapters, sections and subsections. Text may also include parenthetical references, footnotes, or references to the bibliography or endnotes.

Any references to journal publications, authors, contributions, etc. on your chapter pages or major heading pages should be listed as a footnote .

• The entire document is 8.5” x 11” (letter) size.
• Pages may be in landscape position for figures and tables that do not fit in “portrait” position.
• Choose one type style (font) and font size and use it throughout the text of your thesis. Examples: Times New Roman and Arial.
• Font sizes should be between 10 point and 12 point.
• Font color must be black. 
• Hyperlinked text must be in blue. If you hyperlink more than one line of text, such as the entire table of contents, leave the text black. 
• Margins are one inch on all sides (top, bottom, left, and right).
• Always continue the text to the bottom margin except at the end of a chapter.

• Please see preliminary page requirements .
• Body and references are numbered with Arabic numerals beginning with the first page of text (numbered 1).
• Page numbers must be centered ½” from the bottom of the page.

Major Headings

• A sample page pdf for major headings and subheadings is available here.
• Use consistent style for major headings.
• Three blank lines (single-spaced) need to be between the major heading and your text.
• Each chapter is started on a new page.
• The References or Bibliography heading is a major heading and the formatting needs to match chapter headings.

Subheadings

• A sample page pdf for major headings and subheadings is available here .
• Style for subheadings is optional but the style should be consistent throughout.
• Subheadings within a chapter (or section) do not begin on a new page unless the preceding page is filled. Continue the text to the bottom of the page unless at the end of a chapter.
• Subheadings at the bottom of a page require two lines of text following the heading and at least two lines of text on the next page.

Running Head

Do not insert a running head.

When dividing paragraphs, at least two lines of text should appear at the bottom of the page and at least two lines of text on the next page.

Hyphenation

The last word on a page may not be divided. No more than three lines in succession may end with hyphens. Divide words as indicated in a standard dictionary.

• The text of the thesis is double-spaced.
• Bibliography or list of reference entries and data within large tables may be single-spaced. Footnotes should be single spaced.
• Footnotes and bibliography or list of reference entries are separated by double-spacing.
• Quoted material of more than three lines is indented and single-spaced. Quoted material that is three lines or fewer may be single-spaced for emphasis.

Poems should be double-spaced with triple-spacing between stanzas. Stanzas may be centered if lines are short.

• Consult a style manual approved by your department for samples of footnotes.
• Footnotes are numbered consecutively throughout the entire thesis.
• Footnotes appear at the bottom of the page on which the reference is made.
• Footnotes are single-spaced.
• Consult a style manual approved by your department for samples of endnotes.
• Endnotes are numbered consecutively throughout the entire thesis.
• Endnotes may be placed at the end of each chapter or following the last page of text.
• The form for an endnote is the same as a footnote. Type the heading “endnote”.

Tables and Figures

• Tables and figures should follow immediately after first mentioned in the text or on the next page.
• If they are placed on the next page, continue the text to the bottom of the preceding page.
• Do not wrap text around tables or figures. Text can go above and/or below.
• If more clarity is provided by placing tables and figures at the end of chapters or at the end of the text, this format is also acceptable.
• Tables and Figures are placed before references.
• Any diagram, drawing, graph, chart, map, photograph, or other type of illustration is presented in the thesis as a figure.
• All tables and figures must conform to margin requirements.
• Images can be resized to fit within margins
• Table captions go above tables.
• Figure captions go below figures.
• Captions must be single spaced.

Landscape Tables and Figures

• Large tables or figures can be placed on the page landscape or broadside orientation.
• Landscape tables and figures should face the right margin (unbound side).
• The top margin must be the same as on a regular page.
• Page numbers for landscape or broadside tables or figures are placed on the 11” side.

Supplementaries

These are the general requirements for all supplementary pages.

• Supplementary pages are arranged as listed under “Organizing and Formatting the Thesis/Dissertation” and numbered consecutively.
• Headings for all supplementary pages are major headings and the formatting style needs to match chapter headings.

References or Bibliography

• The References or Bibliography heading is always a major heading and the formatting style needs to match chapter headings.
• References or Bibliography are ordered after each chapter, or at the end of the text.
• References or Bibliography must start on a new page from the chapter text.
• References are aligned flush with the left margin.
• The style for references should follow the format appropriate for the field of study.
• The style used must be consistent throughout the thesis.
• Appendices are optional and used for supplementary material.
• The Appendices heading is a major heading and the formatting style needs to match chapter headings.
• As an option the appendix may be introduced with a cover page bearing only the title centered vertically and horizontally on the page. The content of the appendix then begins on the second page with the standard one inch top margin.
• Quality and format should be consistent with requirements for other parts of the thesis including margins.
• Page numbers used in the appendix must continue from the main text.

A Foreign Language Thesis

Occasionally, theses are written in languages other than English. In such cases, an English translation of the title and abstract must be included in the document.

• Submit one title page in the non-English language (no page number printed).
• Submit one title page in English (no page number printed).
• Submit one abstract in the non-English language (page number is ii).
• Submit one abstract in English (page number is numbered consecutively from previous page – example: if the last page of the abstract in the foreign language is page ii the first page of the abstract in English is numbered page iii).

Multipart Thesis

In some departments, a student may do research on two or more generally related areas which would be difficult to combine into a single well-organized thesis. The solution is the multi-part thesis.

• Each part is considered a separate unit, with its own chapters, bibliography or list of references, and appendix (optional); or it may have a combined bibliography or list of references and appendix.
• A single abstract is required.
• The pages of a multi-part thesis are numbered consecutively throughout the entire thesis, not through each part (therefore, the first page of Part II is not page 1).
• The chapter numbering begins with Chapter 1 for each part, or the chapters may be numbered consecutively.
• Pagination is consecutive throughout all parts, including numbered separation sheets between parts.
• Each part may be preceded by a separation sheet listing the appropriate number and title.

Center for Digital Scholarship

Additional information regarding formatting may be found in The Chicago Manual of Style or other style manuals. Choose an appropriate style for your field and use that style correctly and consistently. Contact the Dissertation Office for assistance with dissertations that have special formatting issues such as musical compositions, multi-volume dissertations, or multimedia works.

• Script, italic, or ornamental fonts should not be used.
• Italics may be used as appropriate—to set off titles, for example, or for non-English words.
• Some departments may specify a font.
• Font size should be 12pt. or 10 characters per inch.
• Smaller font size for footnotes, for super- and subscript characters, and for text in tables, figures, and their captions is acceptable.
• Font color must be black, without highlighting.

Line Spacing

• Double-space basic text.
• Set 0 pt spacing before and after paragraphs.
• Single-space material as appropriate. It is customary to single-space footnotes, items in tables, lists, and graphs, and sometimes block quotations.
• It is customary to single-space entries within the table of contents and within reference lists or bibliographies with a line between each entry.
• Set one inch margin on all sides.
• Page numbers and footnotes should be no less than half an inch from edge of page.
• All other material must appear within the margins, including equations, urls, and images.

Page Numbers

• Each page must have a page number printed on it except for the title, copyright, dedication, part-opening, and epigraph pages. Although page numbers should not appear on these pages, a page number is implied. Every sheet must be counted for purposes of numbering pages, with no page missing.
• Preliminary pages must be numbered consecutively, using lowercase Roman numerals. The title page counts as "i" although the page number does not appear on the title page.
• Regardless of the number of preliminary pages, the first text page must be Arabic numeral "1," and the pagination must continue with consecutive Arabic page numbers throughout the body and the end matter of the dissertation.
• Centering page numbers at the bottom of the page is recommended. This will maintain consistency when printing.
• The page number should be visible, without footnotes or other text covering it.

Parts of the Dissertation

• Preliminary pages or front matter may be included in the following order: title page, copyright page, dedication, epigraph, table of contents, list of tables, list of figures, list of illustrations, list of maps, other lists, other preliminary pages, acknowledgments, preface).
• Text or main body (usually divided into parts, chapters, or sections).
• End matter (appendices and bibliographies, references, or works cited).
• The layout and style of the title page must follow the model provided by the Dissertation Office.
• The font should be the same as the font used in the rest of the dissertation.
• Line spacing and margins should be the same also. Double-space, set 0 pt spacing before and after paragraphs, and set one inch margins on all sides.
• Text on the title page should be in upper case. Text should not be bold.
• Use your diploma name.
• The last line should be the month and year you receive your degree, with no date and no comma. The month will be either August, December, March, or June.
• The title page counts as page “i” but the page number should not appear on the page.

Table of Contents

• All major sections appearing after the table of contents must be listed in the table of contents—front matter (lists of tables and other lists, acknowledgments, preface), body (opening pages for parts, chapter titles, section titles as appropriate), and end matter (appendices, supplemental files, reference lists or bibliographies)
• Title, copyright, dedication, and epigraph pages should not be listed in the table of contents. The table of contents follows these initial pages, next any lists (of tables, figures, illustrations, maps, etc. with each list beginning on a new page), then the acknowledgments, and then other preliminary pages.
• There should not be an entry for the table of contents itself.
• Chapter titles should be listed in the table of contents. Subheadings may be listed if this will be useful. If any subheadings are included, then all other subheadings of the same level must be included.
• If the dissertation is divided into parts, the division should be noted in the table of contents. Page numbers should not be listed for separate part-opening pages.
• Generating the table of contents automatically will ensure consistency. Titles and page numbers appearing in the table of contents must match the contents of the dissertation exactly.
• Supplemental files should be treated as appendices and be listed in the table of contents.

List of Tables, List of Figures, and Other Lists

• All dissertations with tables, figures, or other images must include a list of tables, a list of figures, and other lists, even if there is just one table, figure, etc. These lists should be placed immediately after the table of contents. If more than one list is included, each list must begin on a separate page.
• The lists must include the number and title of each table, figure, or other image and the page number on which it begins. Tables, figures, etc. appearing in appendices should be included in the lists as appropriate.
• The title of the table or figure may be an abbreviated version of its caption.
• If a table or figure is longer than a page, only the first page should be referenced.
• The body of the dissertation may be divided into parts, chapters, or sections. The body may include an introduction, chapter one, and subsequent chapters, with figures, tables, and so forth interleaved within the text. Some dissertations may not contain chapters, but most do.
• Each chapter must begin on a new page, while sections within chapters should not, except by chance or to prevent the subheading from being the last line of text on a page. The table of contents should include an entry for all parts, chapters, and major sections. Chapter subheadings may be included in the table of contents or may be omitted.

Tables and Figures

• If the dissertation includes tables, figures, or other images, separate and complete lists of tables, figures, or other images must be placed after the table of contents.
• Each table, figure, etc. must have a unique number assigned to it, along with a title or description of the figure or table. The number and title or description must appear in the caption on the first page of the figure or table. The caption may appear on the next page if such placement allows the entire figure or table to remain on one page.
• Captions, legends, tables, figures, and the outer edges of all images must appear inside the margins.
• Font and point size may differ from that used in the body of the dissertation.
• Tables or figures that are wider than the page may be changed to landscape/broadside orientation if that is preferable to reducing the size.
• Captions and legends may be single-spaced. If they will not fit on the same page as a figure, they may continue onto the second page.
• If a table or figure continues to a second page, the continuation must be labeled. It is poor practice not to repeat the boxhead on the continued pages.
• Tables and figures may be placed on the same page as the text referring to them. If appropriate, they may be gathered in an appendix, but they must not simply appear at the end of a chapter, bibliography, or other section without being identified as a separate section.
• Notes in tables and figures must not be numbered sequentially with other notes but should use either symbols or superscript lowercase letters in a sequence that begins anew for each table or figure.
• Notes in tables must appear at the bottom of the table or figure, not the bottom of the page.
• Sources, credit lines, and permissions for tables and figures may appear in the caption or at the bottom of the table or figure, but not in a footnote or endnote. SOURCE: followed by the source, may be placed under the line rule at the bottom of a table. Choose the formatting styles for this material that is appropriate for your field.
• Choose a style of citation that is appropriate for your field and use that style correctly and consistently.
• Citation management tools can help create bibliographies and citations using various styles.
• Supporting material may be included in an appendix.
• Separate appendix opening pages may be used when appropriate.
• Each appendix begins on a new page.
• If there is one appendix, the heading should appear as Appendix: Title. An appendix is not a chapter and should not be designated as a chapter.
• If there is more than one appendix, each must be identified with a number or letter in addition to the title.
• For each appendix, the title, page number, and appendix number or letter must appear in the table of contents.
• Multimedia material may be included as an appendix and submitted as a supplementary file.

Supplementary Files

• Material that cannot be included as an appendix within the dissertation pdf (audio, video, large spreadsheets, large data sets) may be submitted as an appendix that is a supplementary file.
• Supplementary files must be listed in the table of contents, and a description of the supplementary files should be provided in the abstract.

Reference List or Bibliography

• An entry for the reference list or bibliography must appear in the Table of Contents.
• Individual entries may be single-spaced with a line space between each entry.

University-Wide Requirements for the Ph.D. Dissertation

What font should I choose for my thesis?

This post is by DrJanene Carey, a freelance writer and editor based in Armidale NSW. She occasionally teaches academic writing at the University of New England and often edits academic theses, articles and reports. Her website is http://www.janenecarey.com

Arguably, this question is a classic time waster and the student who poses it should be told to just get on with writing up their research. But as someone who edits theses for a living, I think a bit of time spent on fonts is part of the process of buffing and polishing what is, after all, one of the most important documents you will ever produce. Just bear in mind that there is no need to immerse yourself so deeply in the topic that you start quibbling about whether it’s a font or a typeface that you are choosing .

Times New Roman is the standard choice for academic documents, and the thesis preparation guidelines of some universities stipulate its use. For many years, it was the default body text for Microsoft Word. With the release of Office 2007, the default became a sans serif typeface called Calibri. Lacking the little projecting bits (serifs) at the end of characters makes Calibri and its many friends, such as Arial, Helvetica and Verdana, look smoother and clearer on a screen, but generally makes them less readable than a serif typeface when used for printed text . The other problem with choosing a sans serif for your body text is that if you want passages in italics (for example, lengthy participant quotes) often this will be displayed as slanted letters, rather than as a true italic font.

You would like your examiners to feel as comfortable as possible while their eyes are traversing the many, many pages of your thesis, so maximising legibility and readability is a good idea. Times New Roman is ubiquitous and familiar, which means it is probably the safest option, but it does have a couple of drawbacks. Originally designed for The Times in London, its characters are slightly narrowed, so that more of them can be squished into a newspaper column. Secondly, some people intensely dislike TNR because they think it has been overused, and regard it as the font you choose when you are not choosing a font .

If you do have the luxury of choice (your university doesn’t insist you use Times New Roman, and you have defined document styles that are easy to modify, and there’s enough time left before the submission deadline) then I think it is worth considering what other typefaces might work well with your thesis. I’m not a typographical expert, but I have the following suggestions.

• Don’t use Calibri, or any other sans serif font, for your body text, though it is fine for headings. Most people agree that dense chunks of printed text are easier to read if the font is serif, and examiners are likely to expect a typeface that doesn’t stray too far from the standard. To my eye, Calibri looks a little too casual for the body of a thesis.
• Typefaces like Garamond, Palatino, Century Schoolbook, Georgia, Minion Pro, Cambria and Constantia are all perfectly acceptable, and they come with Microsoft Word. However, some of them (Georgia and Constantia, for example) feature non-lining numerals, which means that instead of all sitting neatly on the base line, some will stand higher or lower than others, just like letters do. This looks nice when they are integrated with the text, but it is probably not what you want for a tabular display.
• Consider using a different typeface for your headings. It will make them more prominent, which enhances overall readability because the eye scanning the pages can quickly take in the hierarchy of ideas. The easiest way to get a good contrast with your serif body text is to have sans serif headings. Popular combinations are Garamond/Helvetica; Minion Pro/Myriad Pro; Times New Roman/Arial Narrow. But don’t create a dog’s breakfast by having more than two typefaces in your thesis – use point sizes, bold and italics for variety.

Of late, I’ve become quite fond of Constantia. It’s an attractive serif typeface that came out with Office 2007 at the same time as Calibri, and was specifically designed to look good in print and on screen. Increasingly, theses will be read in PDF rather than book format, so screen readability is an important consideration.  Asked to review Microsoft’s six new ClearType fonts prior to their release, typographer Raph Levien said Constantia was likely to be everyone’s favourite, because ‘Even though it’s a highly readable Roman font departing only slightly from the classical model, it still manages to be fresh and new.’

By default, Constantia has non-lining numerals, but from Word 2010 onwards you can set them to be lining via the advanced font/number forms option, either throughout your document or in specific sections, such as within tables.

Here is an excerpt from a thesis, shown twice with different typefaces. The first excerpt features Calibri headings with Constantia body text, and the second has that old favourite, Times New Roman. As these examples have been rendered as screenshots, you will get a better idea of how the fonts actually look if you try them on your own computer and printer.

Related posts

Should I get an editor for my thesis?

Love the Thesis whisperer and want it to continue? Consider becoming a $1 a month Patreon and get special, Patreon only, extra Thesiswhisperer content every two weeks!

Share this:

The Thesis Whisperer is written by Professor Inger Mewburn, director of researcher development at The Australian National University . New posts on the first Wednesday of the month. Subscribe by email below. Visit the About page to find out more about me, my podcasts and books. I'm on most social media platforms as @thesiswhisperer. The best places to talk to me are LinkedIn , Mastodon and Threads.

• Post (609)
• Page (16)
• Product (6)
• Getting things done (259)
• Miscellany (139)
• On Writing (139)
• Your Career (113)
• You and your supervisor (66)
• Writing (48)
• productivity (23)
• consulting (13)
• TWC (13)
• supervision (12)
• 2024 (8)
• 2023 (12)
• 2022 (11)
• 2021 (15)
• 2020 (22)

Whisper to me....

Enter your email address to get posts by email.

Email Address

Sign me up!

• On the reg: a podcast with @jasondowns
• Thesis Whisperer on Facebook
• Thesis Whisperer on Instagram
• Thesis Whisperer on Soundcloud
• Thesis Whisperer on Youtube
• Thesiswhisperer on Mastodon
• Thesiswhisperer page on LinkedIn
• Thesiswhisperer Podcast
• 12,217,043 hits

Discover more from The Thesis Whisperer

Subscribe now to keep reading and get access to the full archive.

Type your email…

Continue reading

• Skip to Content
• Skip to Main Navigation
• Skip to Search

Indiana University Bloomington Indiana University Bloomington IU Bloomington

• gradSERU Survey
• Degree Conferral
• Time to Degree
• Continuing Non-Degree Program
• Application Fee Waivers
• Tuition & Fees
• Student Loans
• Tax Information
• Why IU Bloomington
• Fellowships & Awards
• Recruitment
• Reimbursing Departments for Recruitment Visits
• Grad Grants Center
• Graduate Mentoring Center
• Graduate Career Coaching
• Three Minute Thesis
• Ph.D. Career Diversity Symposium
• Campus Visits
• Diversity Fellows Initiative
• STEM Summer Scholars Institute
• IU-ISURP Summer Program
• IU-MSI STEM Initiative
• Office of Postdoctoral Affairs
• Master’s Students
• Ph.D. Students
• Master’s Deadlines
• Ph.D. Deadlines
• Required & Optional Sections
• Defense Format
• Upcoming Defense Announcements
• Multidisciplinary Degree Programs
• Accelerated Master’s Programs
• Meet Our Students
• Student Organizations
• Housing & Child Care
• Training & Policies
• Health Insurance
• Access & Accommodation
• Newsletters
• Recent News
• Upcoming Events
• Prospective Students
• Current Students
• Faculty & Staff

Graduate School Bloomington

• Academic Requirements
• Thesis & Dissertation
• Doctoral Dissertation Guide

Doctoral dissertation formatting

In order to be accepted, your doctoral dissertation must comply with certain formatting guidelines. Be sure to read the list of requirements thoroughly before you begin, and check the list carefully before you submit.

• Font size should be either 11 or 12 point for the entire document with the only exception being the title on the title page, footnotes, tables/charts, and picture/table descriptions. Font up to size 16 point may be used for the document’s title on the title page only. Font as small as 10 point may be used for footnotes, the content of tables/charts, and picture/table/chart descriptions. Within tables, charts, or image descriptions, font smaller than 10 point may be used, but thought should be given to legibility.
• Black font is used throughout the document, with the only exception being areas where a different font color serves a purpose in explaining or highlighting some aspect of the research/document in a way black font could not.
• Be consistent in font style throughout your document. The following font styles are recommended for the ease with which they convert to a PDF. All documents have to be converted to a PDF in the electronic submission process.
•  Arial
•  Bookman Old Style
•  Calibri
•  Cambria
•  Lucida Bright
•  Times New Roman 

Page numbers and headers

• Page numbers must be clear, consecutive, and printed on every page, including appendixes, tables, figures, maps, charts, photographs, etc., except for the title page and vita page.
• Lowercase Roman numbers (e.g., i, ii, iii) are used for the front matter (the pages preceding the main body of work).
• Arabic numerals (e.g., 1, 2, 3) are used in the body of the work, the bibliography and the appendices.
• The title page counts as page i but does not bear a number.
• Begin the actual numbering with the acceptance page as page ii, and continue with lowercase Roman numerals until the start of the actual body of the dissertation. That page, whether part of your full introduction or of your first chapter, should be numbered using the Arabic numeral 1, and every page thereafter should be numbered consecutively until you reach the vita page.
• Ordinarily, page numbers should be centered at the top or bottom of the page, entered midway between the edge of the paper and the text to prevent their loss during the binding process.
• Running heads are not used in dissertation submissions. Please limit the content of your header and footer space to the page number only.
• Top, Right, and Bottom margins must be one inch. If the dissertation will only be electronically accessed, a one-inch left margin is acceptable. The left margin should be one inch if the dissertation will be bound in paper form by ProQuest. If using a bindery other than ProQuest, please consult with the bindery about the size of the left margin needed for their binding process.
• Proper margin space is critical for proper binding. Inadequate margins can result in part of your material being lost after the combination of copying and binding. Even if all the material remains, insufficient margins can affect the readability and appearance of your work.
• These margin requirements apply to all materials included in the dissertation, including figures, tables, maps, plates, etc., and any preliminary material you choose to include.

The material should be double-spaced. Long quotations within the text should be typed single-spaced with wider margins.

• Dissertations should be written in English, unless you and your department/committee have decided otherwise. In that case, an English-language abstract must be included in the dissertation.

Style manuals

Commonly used style manuals include:

• The Chicago Manual of Style
• Turabian, Kate L., A Manual for Writers
• Modern Language Association (MLA) style sheet
• American Psychological Association (APA) style sheet (especially for works in the social sciences)

Check with your research committee if you are unsure which style manual you should use.  IU Libraries also offer research support, including links to online versions of some style manuals. 

• Check with your department on this requirement. This format depends largely on your particular field or topic.
• For example, you may opt to have footnotes appear on the page where the annotation occurs, at the end of each chapter, or solely in the traditional reference/bibliography section(s). Be sure to follow the conventions of your department or discipline.
• Each document must have at least one reference section.

Photographs and images

• If photographs or detailed graphics are part of the work, make sure they are crisp and clear when printed.
• The IU Seal or Branding should not be used on any portion of the dissertation. These items may be used only with the written permission of the university.
• The bound copy must be hardcover, 8 1/2 X 11 inch, and identical to the final version that the Graduate School accepts within your ProQuest account.
• The Graduate School accepts only bindings that use the oversewn method. Velo binding available from some photocopying businesses is not acceptable.
• Ask the bindery to put the dissertation title and your full name on the front cover and the title plus your last name on the spines of the bound copies. Remember that this title needs to fit along the spine of the bound dissertation. The IU logo or seal should not be used on any dissertation.
• If submitting a bound copy to the Graduate School to fulfill the embargo requirement, you should arrange for the bindery to send the finished book directly to the Graduate School:

Graduate School Bloomington social media channels

• Faculty & Staff Resources

  [email protected]

• English English Spanish German French Turkish

How to Layout and Format a Dissertation: 10 Tips

Who decides the layout requirements for a dissertation? The answer is primarily clear, either your supervisor or department. Nonetheless, each program has a standard guideline determining page numbers and table of contents. Should you use MLA or APA citation style, you follow the MLA format guide or APA guide. Here are 10 useful tips for dissertation layout and formatting.

Who decides the layout requirements for a dissertation? The answer is primarily clear, either your supervisor or department. Nonetheless, each program has a standard guideline determining page numbers and table of contents. Should you use  MLA  or APA citation style, you follow  the MLA format guide  or APA guide. Here are 10 useful tips for dissertation layout and formatting.

1. Font, font size, and line spacing

You must use a clear, legible, and professional font. Verdana, Times New Roman, and Calibri (the default font in Microsoft Word) are the most preferred font types. Then, you need to set the font size, which could be 10 or 12.

Scientific articles and theses use a line spacing of 1.15 or 1.5 because the document becomes more readable. Your supervisors can post comments between the lines of text if necessary.

2. Tables and figures

All the tables, figures, and illustrations (the graphics) used in your dissertation should include numbers and a clear title. You can refer to a specific drawing within the text by using the numbers. Simultaneously, the reader can see the graphic with a glance by utilizing the title.

What is crucial is the placement of titles for tables and figures. Tables should have the number and title placed above them, while figures and all other illustrations should include the number and titles put below them.

Thanks to a Microsoft Word feature, you can automatically put these numbers and titles in the precise locations. All you need to do is to choose the graphic, right-click and select “Insert Caption…..” Then, specify it as a table or figure and enter a title in the dialogue box. Next, click “Okay,” and see that the number and the title have found their proper place. 

This Word feature has another pro that you label your graphics, and you can generate  lists of tables and figures  with a push of a button.

How to Format Citations Automatically Using Microsoft Word

How to Use Track-Changes Feature in Microsoft Word 

Heading styles can help readers differentiate between chapters, sections, and subsections of your dissertation. Illustratively, while you use  bold  for all chapter headings, you may  italicize  all lower-level headings.

After deciding on the scheme, you should apply it consistently in your dissertation. Thus, the “Styles” feature should help you in Microsoft Word. Following a heading formation, you can highlight and choose a style, including Heading 1, 2, or 3 so forth) using the toolbar. You may readily keep track of your style changes if you keep a list.

4. How to cite references

It is exceedingly crucial to cite sources correctly and appropriately in a dissertation. Otherwise, you may fall into a dangerous trap called  plagiarism . By far, the APA standard is the most preferred choice. It has a specific and updated version. It is critical to stay updated and follow the last APA 7th edition. 

APA Format Guide for Academic Manuscripts

APA Manual 7th Edition: The 9 Most Important Changes

How to Present Tables and Figures in APA 7th Edition

5. Paragraph marks

 Proper formatting in Microsoft Word is sometimes challenging, and one might not have a lovely story of their own. Unfortunately, moving one graphic may alter your document substantially.

The solution is relatively simple. Use the “Show paragraph marks” feature and avoid any frightening scenario like this. You may turn it on after clicking on the paragraph symbol in your home toolbar (shown above). Then, what will follow is a black paragraph symbol after each paragraph and a “hard return” in your document. Then, you can see your layout construction.

6. Headers and footers

A professional look in your dissertation is only possible by headers and footers. Readers can readily see what is in front of them.

You may add a header or footer by double-clicking at the top or bottom of a page in your document. You may include your name, the date, the title of your dissertation, page numbers, institution, etc.

7. Page numbering

As a standard, page numbering is placed in the lower right-hand corner of the page. However, be cautious. The title page of a dissertation usually has no page number.

The page numbering should not start on the cover page but on page 1. All you need to do is place the cursor on the bottom of the page. Then you can start the page numbering (should you desire to start on page 2, you may click at the bottom of the first page).

Then move to “Page layout” and “Breaks” the submenu “Next page” follows.

The numbering should begin on the side you switch (in this case, page 2). While editing the header or footer, choose “link to previous.” The next step is to click on “Move to footer” and on the “Link to previous.” 

Now, use the “Insert” tab to add page numbering, then on the “Header and Footer” group, and hit the “Page number .” Now you can choose the location of the page number (top of the page, bottom of the page, or page margins).

 Ultimately, you should click on “format page number” and enter the page numbers where you want the numbering to start. After pressing “ok,” the page number starts from the previously selected break.

8. What to include on the title page?

The title page is the most critical touch for your dissertation. Please ensure that you don’t miss anything mentioned so far.

9. How about structure?

Secure that everything is in the correct order in your dissertation. If you are keen on seeing how other students have addressed similar issues, checking dissertation examples  may help.

10. The final step: Dissertation printing

Now you are ready to prepare a hard copy of your final document. Will it be single-or double-sided? Many issues are relevant.

Check one last time that you meet all the requirements!

How can proofreading and editing improve your paper?

Best Edit & Proof delivers beyond just editing or proofreading services. Our editors pay close attention to detail, including paragraph structure, internal consistency, tone, flow, accuracy, and grammar, to ensure that your manuscript has found its ultimate best.

If you need us to make your Ph.D. thesis shine, contact us unhesitatingly!

Best Edit & Proof expert editors and proofreaders focus on offering manuscripts with proper tone, content, and style of  academic writing,  and also provide an upscale  editing and proofreading service  for you. If you consider our pieces of advice, you will witness a notable increase in the chance for your research manuscript to be accepted by the publishers. We work together as an academic writing style guide by bestowing subject-area editing and proofreading around several categorized writing styles. With the group of our expert editors, you will always find us all set to help you identify the tone and style that your manuscript needs to get a nod from the publishers.

Thesis/dissertation formatting service

You can also avail of our assistance if you are looking for editors who can format your manuscript, or just check on the  particular styles  for the formatting task as per the guidelines provided to you, e.g.,  APA,   MLA, or Chicago/Turabian styles. Best Edit & Proof editors and proofreaders provide all sorts of academic writing help, including editing and proofreading services, using our user-friendly website, and a streamlined ordering process.

Get a free quote for editing and proofreading now!

Visit our  order page  if you want our subject-area editors or language experts to work on your manuscript to improve its tone and style and give it a perfect academic tone and style through proper editing and proofreading. The process of submitting a paper is very easy and quick. Click here to find out how it  works.

Our pricing is based on the type of service you avail of here, be it editing or proofreading. We charge on the basis of the word count of your manuscript that you submit for editing and proofreading and the turnaround time it takes to get it done. If you want to get an instant price quote for your project, copy and paste your document or enter your word count into our  pricing calculator.

24/7 customer support | Live support

If you need support for editing and proofreading services,  contact us . You can also  e-mail  us or use the 24/7 live chat module to get direct support. We have a 24/7 active live chat mode to offer you direct support along with qualified editors to refine and furbish your manuscript. Alternatively, you can text us through our WhatsApp business support line.

Stay tuned for updated information about editing and proofreading services!

Follow us on  Twitter,  LinkedIn,    Facebook,  Instagram,  and  Medium .

For more posts, click  here.  

This article explains how to layout and format a dissertation for outstanding results. To give you an opportunity to practice proofreading, we have left a few spelling, punctuation, or grammatical errors in the text. See if you can spot them! If you spot the errors correctly, you will be entitled to a 10% discount.

• Editing & Proofreading
• Citation Styles
• Grammar Rules
• Academic Writing
• Proofreading
• Microsoft Tools
• Academic Publishing
• Dissertation & Thesis
• Researching
• Job & Research Application

Similar Posts

How to Determine Variability in a Dataset

How to Determine Central Tendency

How to Specify Study Variables in Research Papers?

Population vs Sample | Sampling Methods for a Dissertation

7 Issues to Avoid That may Dent the Quality of Thesis Writing

How to Ensure the Quality of Academic Writing in a Thesis and Dissertation?

How to Define Population and Sample in a Dissertation?

Recent Posts

ANOVA vs MANOVA: Which Method to Use in Dissertations?

They Also Read

Writing an impactful introduction is more than just following the rules. If you search on the Internet, you may find stereotypical rules and regulations. However, it is important to understand that the author’s creative sense and ability to comprehend the topic helps in executing an effective introduction. This article discusses the major elements of writing an introduction and how you can write an impactful introduction.

Writing and publishing a scientific research paper require more than just bookish knowledge. Every year, thousands of scientists and researchers strive to publish their research papers in suitable journals, but many of them fail without following proper guidelines. In this quick guide, intended for graduate students and other young scholars, we identify 7 common pitfalls and offer helpful solutions to prepare more impactful papers.

One of the main things that any editor or proofreader looks out for while editing a piece of text is punctuation marks. The reason is simple — they can alter the meaning of your text if you do not use them correctly. It becomes even more prominent when you are writing an academic paper. In academic writing, an author may be easily misunderstood when ambiguous sentences are used. Punctuation marks mainly serve the purpose to disambiguate sentences. While literary or other types of writing will have a certain degree of freedom for using punctuation marks, academic work needs to be precise and correct. This article will cover the importance of punctuation marks in academic writing.

We may have qualitative, quantitative, and mixed methods in dissertations. This blog will elaborate on quantitative dissertations, qualitative dissertations, and mixed methods dissertations by addressing their similarities and differences.

Formal writing is essential to academic essays, a thesis, or a dissertation. Many issues may dent your writing. This article covers 7 critical ones to avoid that may affect the quality of thesis and dissertation writing.

• Graduate School
• Current Students
• Dissertation & Thesis Preparation

Formatting Requirements

Workday student support.

Graduate students can find "how to" guides and support information on our Workday support page .

Choice of font

For most theses, the font should be one that is appropriate for an academic paper. Generally, the same font should be used throughout the thesis (dedication page and scholarship-appropriate alterations excepted).

Normally the font should be equivalent to 10 to 12 point font in Times New Roman or Arial for main text, and at least 2mm high in tables and figures.

Font colour should normally be black throughout, except for web links which should be blue.

• Why Grad School at UBC?
• Graduate Degree Programs
• Application & Admission
• Info Sessions
• Research Supervisors
• Research Projects
• Indigenous Students
• International Students
• Tuition, Fees & Cost of Living
• Newly Admitted
• Student Status & Classification
• Student Responsibilities
• Supervision
• Managing your Program
• Health, Wellbeing and Safety
• Professional Development
• Final Doctoral Exam
• Final Dissertation & Thesis Submission
• Life in Vancouver
• Vancouver Campus
• Graduate Student Spaces
• Graduate Life Centre
• Life as a Grad Student
• Graduate Student Ambassadors
• Meet our Students
• Award Opportunities
• Award Guidelines
• Minimum Funding Policy for PhD Students
• Killam Awards & Fellowships
• Dean's Message
• Leadership Team
• Strategic Plan & Priorities
• Vision & Mission
• Equity, Diversity & Inclusion
• Initiatives, Plans & Reports
• Graduate Education Analysis & Research
• Media Enquiries
• Newsletters
• Giving to Graduate Studies

Strategic Priorities

• Strategic Plan 2019-2024
• Improving Student Funding
• Promoting Excellence in Graduate Programs
• Enhancing Graduate Supervision
• Advancing Indigenous Inclusion
• Supporting Student Development and Success
• Reimagining Graduate Education
• Enriching the Student Experience

Initiatives

• Public Scholars Initiative
• 3 Minute Thesis (3MT)
• PhD Career Outcomes

Graduate School

• Resources to Prepare for Graduate School
• Adonara Mucek, Ph.D. Geology '17
• Adriana Mendoza, Ph.D. Mathematics '14
• Andrew Olsen
• Becca Maher ('21, Ph.D.)
• Bryan Lynn, Ph.D. Integrative Biology
• Celeste Frazier Barthel, Ph.D. Education '21
• Diane Brandt
• Francesca Germano, Toxicology, M.S.
• Garrett Rogers
• Jafra Thomas
• Jen Hayes, Horticulture, PhD
• Jordan Jimmie
• Jordan Spradlin, Public Health, MPH
• Kalina Fahey, Psychology, Ph.D.
• Katie Stelling, Earth, Ocean and Atmospheric Sciences, Ph.D.
• Kelsey Contreras
• Layla Ghazi
• Marie Tosa, Ph.D. Wildlife Sciences
• Sara Letton
• Tiara Walz, Ph.D. Public Health
• Glossary of Terms
• Master's Students
• Doctoral Students
• Certificate Students
• Graduate School Orientation 2024
• Graduate Teaching Orientation 2024
• Do I Qualify to Attend Graduate Summer Step?
• Orientation for Winter, Spring and Summer Terms
• Co-sponsorships
• Your Graduate Committee
• Student Resources
• Grad Research Photo Competition
• Tips for Scheduling Committee Meetings
• Program of Study

Formatting a Thesis or Dissertation

• Pretext Pages Templates
• Commencement
• Grad Inspire
• Grievance Procedures
• Request a Workshop
• Earning Concurrent Degrees or Pursuing a Dual Major
• Career Preparation
• Grad Writing Group Challenge
• Graduate Writing Center Online
• Changing or Adding a Degree, Major or Certificate
• GRAD 420 - Graduate School Preparation
• GRAD 512 - Current Issues in Higher Education
• GRAD 513 - Professional Development in College and University Teaching
• GRAD 516 - Graduate Teaching Seminar
• GRAD 520 - Responsible Conduct of Research
• GRAD 521 - Research Data Management
• GRAD 542 - The Inclusive College Classroom
• GRAD 543 - Dialogue Facilitation in Professional Contexts: Skills and Practice for Graduate Students
• GRAD 550 - Introduction to Online Course Development and Facilitation
• GRAD 560 - Theories of Teaching and Learning
• GRAD 561 - Course Design and Methods
• GRAD 599 - Creating Happiness
• GRAD 599 - Cultivating Productive and Positive Academic Relationships for Graduate Success
• WR 599 - Graduate Writing for English Language Learners
• WR 599 - Scientific and Technical Research Writing
• WR 599 - Writing Workshop for Thesis and Dissertation Writers
• OSU Grad Advantage
• Graduate Faculty Membership
• Graduate Council Representatives
• Policy updates
• Holistic Admissions
• Defining the Graduate Mentor
• The Importance of Mentors
• Apprenticeship and Mentoring
• Mentor and Mentee Pairing
• Maintaining and Evaluating Mentoring
• Suggestions for Mentoring Programs
• Handbooks, Manuals, and Guides
• Mentoring Bibliography
• Communication Items
• Detailed Considerations for a Joint Degree Program
• MOU Outline for Creating a Joint Program
• College and Program Recruitment Representatives
• Graduate Recruitment Tips
• Helpful Recruitment Links
• Shared Graduate Recruitment Schedule
• Leave of Absence and Family Medical Leave Eligibility
• Mentor Training for Faculty
• Student Funding
• Student Progress
• Student Progress Information for Programs
• Student Registration Information
• August 2023 Newsletter
• Sept 2023 Newsletter
• October 2023 Newsletter
• November 2023 Newsletter
• April 2024 Newsletter
• Dec 2023 Newsletter
• Feb 2024 Newsletter
• Jan 2024 Newsletter
• June 2024 Newsletter
• March 2024 Newsletter
• May 2024 Newsletter
• Strategic Plan
• Request Info
• Current Students
• Faculty Resources

You are here

On this page:

Congratulations! You have arrived at an important step in the pursuit of your graduate degree—the writing of your thesis or dissertation. Your scholarly publication reflects the results of your research and academic pursuits at Oregon State University.

Student Responsibility

Students are responsible for:

• Meeting the deadlines associated with its preparation. Visit the master's deadlines and the doctoral deadlines.
• Submitting the necessary forms.
• Ensuring that your document conforms to all requirements in this Thesis Guide.

Your document must clearly state your objectives and conclusions, and present your results in a lucid and succinct manner. It must have a professional appearance and be user-friendly.

Ethical research practice requires you to avoid the following:

• Plagiarism: failure to acknowledge the work of others by using proper citations and obtaining written permission to use copyrighted material.
• Fabrication: the creation of fictitious research results.
• Falsification: alteration of research results by misrepresentation or selective reporting of findings.

General Format

Standard Document Format refers to one thesis document that addresses a single theme. The Pretext Pages, Introduction, Conclusion, and Bibliography are mandatory. Your committee determines the additional chapters; you choose the chapter titles. The following parts comprise the Standard Document Format:

• Pretext Pages (see model pages illustrated in Figures 2-11)
• Chapter 1 – Introduction
• Chapter 2 – Literature Review
• Chapter 3 – Materials and Methods
• Chapter 4 – Results
• Chapter 5 – Discussion
• Chapter 6 – Conclusion

Bibliography

• Appendices (optional)

Manuscript Document Format is a single thesis document made up of several scholarly manuscripts or journal articles addressing a common theme. All manuscripts/articles must be related or address a single, common theme. You must be the primary author of each manuscript. Co-authors other than your major professor must be mentioned in a Contribution of Authors page (see Figure 9) in the pretext section of the document. Formatting should be consistent for each journal article and must follow the thesis guide formatting not the separate journal formats. The following parts comprise the Manuscript Document Format:

• Chapter 1 – General Introduction (common introduction linking all manuscripts thematically)
• Chapter 2 – First Manuscript
• Chapter 3 – Second Manuscript
• Chapter 4 – General Conclusion (common conclusion linking all manuscripts thematically)
• Bibliography (common bibliography covering all manuscripts, although each manuscript may have its own reference section)
• Appendices – (optional)

Note: Within the larger Manuscript Format thesis document, Chapter Heading Pages (see Figure 1 below) precede individual manuscripts that have already been published. If not published, page is not required. Manuscripts must uniformly conform to these thesis guidelines.

MANUSCRIPT TITLE CENTERED AND ALL CAPS

Your name and other authors

Journal name Address of journal Issue manuscript appears in

Figure 1. Chapter Heading Page for Manuscript Document Format

Page Layout

Margin requirements.

The left margin must be 1 inch unless printing and binding a personal or departmental copy then change to 1.5 inch. All other margins must be at least 1 inch, preferably 1.2 for top margin. Nothing may invade a margin. Every page must meet margin requirements. Margin requirements are especially important if binding a copy of your thesis.

Page Numbering

Pretext pages: Do not add page numbers to pretext pages.

Body: The body of the text begins with page 1 and all successive pages are numbered consecutively with Arabic Numbers (e.g. 2, 3, etc.) including Appendix/Appendices and Bibliography. Page numbers should be the same size and font as the body of the text. Page numbers must appear at the top right corner of pages, approximately 1 inch from the top edge of the page and at least 1 inch from the right edge of the page. Page numbers must not invade any margins. There should be at least one space between the page number and the first line of text.

Your title must be worded exactly the same throughout the document as it appears on the Abstract page, Title page and centered on page one (optional). Titles longer than one line should be single-spaced. The document's title does not count as a heading level.

Text Requirements

Text spacing.

Line spacing must be 1.5 or double, consistent throughout the document and matching which one you choose for the body of the thesis. Use single spacing only in the following situations:

• Headings longer than one line
• Figure and table titles and associated legends
• Bibliographical and reference citations
• Direct quoted material
• Items listed within the body of the text (optional)
• Where indicated in the pretext section

Use regular, unadorned print, 10- to 12-point size for text (headings may be 14-point only if all headings are 14-point). Font size within figures and tables can be smaller but must be readable. Use the same font style and font size throughout.

Chapter names are Level 1 headings. Subheadings of a chapter are Level 2 headings. Subheadings of chapter subheadings are Level 3 headings, and so forth. Each level must look different from the other levels. Headings of the same level must look the same throughout the document. All headings, regardless of level, must be the same font size. Either number all headings or number none (See figures 10a and 10b). Single space headings that are more than one line. Use adequate and consistent spacing between the headings and the text. A minimum of two subheadings may be used within a given level. Each level 1 heading begins a new page.

Appendix Heading Page

A numbered, counted page should be inserted in front of your document's appendix/appendices. The word APPENDIX (or APPENDICES) should be centered about 1/3 down this page. This heading page and its page number should appear in the Table of Contents.

Blocked Quotes

Use Blocked Quotes for quoted material longer than three lines. Use the same font size as within the text. Single-space the quotation, and indent it evenly on both sides. Left justify the quotations.

Use the same font size as within the text. Choose a reference style with the guidance of your major professor and your committee and be consistent. Single-space each citation and use adequate and consistent spacing between citations.

Footnotes collected at the end of a chapter are called endnotes. Use the same font size as within the text. Single-space each endnote, and use adequate and consistent spacing between endnotes.

Orphan Lines, Headers, Footnotes

No orphan lines may appear at the top or bottom of a page. No headers or footers may be used. Footnotes are acceptable.

Figures and Tables

Figures and tables may be located in one of two places in your document. You must choose one system and use it consistently throughout your work.

• Insert the figure within the text, as close as possible after the first reference is made to it.
• Place your figures at the end of the chapter in which it is first discussed or referenced.

Figure Definition

The definition of a figure is quite broad. “Figures” include charts, diagrams, drawings, examples, graphs, illustrations, maps, photographs, etc. In the majority of cases, if it's not a table, it is a figure. All figures must be listed in the pretext pages' List of Figures.

Table Definition

A table is broadly defined as a compact, systematic list of data (facts, figures, values, etc.), generally arranged in columns and/or rows. All tables must be listed in the pretext pages' List of Tables.

Figure and Table Labels and Captions

A figure's or table's label denote the type of figure or table and its number, and a figure's or table's caption is its title and description. Every figure or table must have a label and caption unless there is only one of its type in the document. Use consecutive label numbers by order of appearance within the text. Each figure or table must have a unique number, i.e., Table 1.1 for the first table in Chapter 1, Table 2.1 for the first table in Chapter 2, or start with 1 and number consecutively. As always, pick one method and use it consistently throughout your document. Label and caption font size is the same as body text size. Add one space between the figure or table and its label and caption, and between the figure or table and text. The label and caption should be placed outside its boundaries, commonly above a table and below a figure.

Oversized Figures and Tables

Illustrations that take up more than one page should have the label followed by “(Continued)” on the second page. If both a figure/table and its label and caption do not fit on one page, place only the label on the page with the figure or table, and place the label and caption on a separate page that precedes the figure or table (called a legend page). Single-space the label and caption and center it 1/3 of the way down the page. Include no other text on this page. List the page number of the legend page in the pretext list.

There are two ways of managing the inclusion of oversized figures if printing personal copies:

• Reduction: Photographically reduce the size of figures to meet margin requirements.Page numbers and figure captions must remain the same font size as the text.
• Accordion Fold: If you are printing a personal or departmental copy. The final folded page must be 11 inches in height and no more than 8 inches wide. Fold the page from right to left, making the final folded width 8 inches. Fold the page a second time from left to right so the page number appears in the same position as all other pages in the text.

Landscaping

Because of their shape, some figures/tables may need to be placed crosswise on a page. If so, the top of the figure/table should be at the left margin as viewed normally (i.e. portrait orientation), and the caption should be parallel to the right margin. Reformatting pages numbers to match location of portrait oriented page numbers is not required. Margin requirements apply.

Choose high-contrast colors to differentiate lines, bars, or segments or use symbols with or without the color.

Parts of the Document (in Order of Appearance)

Regardless of general format, the thesis includes particular parts in an established order as listed below. Model pages are provided for most pretext pages. In all cases, margin requirements apply (see above) and the same font style/size must be used in the body of the text and elsewhere. All titles of pretext pages should be formatted identically with respect to font size and style.

I. Pretext Pages

Download templates for pretext pages.

An abstract is a summary of the document's purpose, methods, major findings, and conclusions. Your name (designated “Student Name”) must appear exactly the same throughout the document. In all cases, use the official name of the major as found in the OSU Catalog on the Graduate School's website under Programs. Please add underlines where indicated in the examples. (See figs. 2, 3, and 4)

AN ABSTRACT OF THE THESIS OF

Thomas A. Edison for the degree of Master of Science in Physics presented on January 30, 2024 A .

Title: Upon Recording Telegraph Messages Automatically.

Abstract approved: _______________________________________

Major I. Professor B

Begin text here, using the same line spacing (either double space or 1.5), font style and font size as within the body of the text in your document.

• Use official major name, not area of concentration
• Your name must appear exactly the same throughout the document
• For defense date use month spelled out, date, and year: January 30, 2022
• Title must be the same throughout the document

Figure 2. Abstract Page for Master's Degree. A The line breaks in these four lines are single space with a space after the defense date. B Include major professor's middle initial unless there is none. Do not include their title. Co-major Professors may share the same signature line; put both names below the line.

Student Name for the degree of Master of Arts in Interdisciplinary Studies in First Concentration A . , Second Concentration , and Third Concentration presented on Defense Date B .

Title: Underlined Title Here

Major I. Professor C

• Use official major or minor name, not area of concentration

Figure 3. Abstract Page for Master's Degree. A The line breaks in these four lines are single space with a space after the defense date. B The line breaks in these six are single-spaced with a space between the defense date and title. C Include major professor's middle initial unless there is none. Do not include their title. Co-major Professors may share the same signature line; put both names below the line.

AN ABSTRACT OF THE DISSERTATION OF

Student Name for the degree of Doctor of Philosophy in Official Name of Major presented on Defense Date A .

Title: Underline Title here.

Figure 4. Abstract Page for Doctoral Degree. A The line breaks in these four lines are single-spaced with a space between the defense date and title. B Include major professor's middle initial unless there is none. Do not include his/her title. Co-major Professors share the same signature line; put both names below the line with several spaces between names.

Copyright Page

Copyright by Thomas A. Edison January 30, 2022 All Rights Reserved or Creative Commons License

Figure 5. Copyright Page. Please choose either All Rights Reserved or Creative Commons License but not both. The copyright page is required. Inclusion of this page does not obligate you to go through a formal copyright process. Name must appear exactly the same throughout the document. Second line is the final defense date. Wording should begin one third down from the top and is centered.

Upon Recording Telegraph Messages Automatically

Title must match Abstract and page one title exactly. Do not boldface the title.

by Thomas A. Edison

Add two spaces after the title.  

A THESIS submitted to Oregon State University

Doctoral students may use “A DISSERTATION” instead of “A THESIS” on Title Page, Abstract, and Approval Pages.

in partial fulfillment of the requirements for the degree of

Follow division of this sentence ( in partial fulfillment of... ) exactly.

Master of Science

Spacing should be the same after your name, “Oregon State University,” and your degree.

Presented January 30, 2023 Commencement June 2023 A

Defense date.

Figure 6. Title Page. A Commencement date is the June following the defense date, so if defense is after the commencement ceremony it would be for the following year. Only month & year, no date or it will be rejected.

Approval Page

On the Approval Page the Major Professor represents the major. The Approval Page considers your advisor as your major professor, regardless of his/ her official rank or tenure home. Official major names and department names can be found in the OSU Catalog. Some majors and departments have the same name while others differ. Your signature constitutes consent to have your document available for public reference in Valley Library, but the signatures on this page have been replaced with the ETD Submission Approval form.

Master of Science thesis of Thomas A. Edison presented on January 30, 2023.

_______________________________________ Major Professor representing Physics

_______________________________________ Head of the Department of Physics A

_______________________________________ Vice Provost and Dean of the Graduate School

I understand that my thesis will become part of the permanent collection of Oregon State University libraries. My signature below authorizes release of my thesis to any reader upon request.

_______________________________________ Thomas A. Edison, Author

Figure 7. Standard Approval Page. A If not part of a department, please list the head/chair/dean of the school or college.

Alternate wordings for signature lines:

Wording with two major professors:

Co-Major Professor, representing Name of Major

Head/Chair of the Name of Department, School or College

Vice Provost and Dean of the Graduate School

Wording with dual majors:

Co-Major Professor, representing Name of 1st Major

Co-Major Professor, representing Name of 2nd Major

Wording for MAIS:

Major Professor, representing Name of Major Area of Concentration

Director of the Interdisciplinary Studies Program

Acknowledgements

The acknowledgements page is optional but recommended. The exact content of the page is up to the student. Use same text spacing: 1.5 or double-space.

ACKNOWLEDGEMENTS

The author expresses sincere appreciation...

Figure 8. Acknowledgements Page.

Contributions

Manuscript document format only. If no contributions remove this page. Use same text spacing either 1.5 or double space.

CONTRIBUTIONS

Dr. So-and-so assisted with data collection. Such-and- such was involved with the design and writing of Chapter 2. Dr. Whoisit assisted in the interpretation of the data.

Figure 9. Contributions (manuscript format only).

Table of Contents

Ensure that the page numbers accurately reflect where the headings appear in the text. Listing the chapter headings in the Table of Contents is required; listing the subheadings is optional, and you may list some levels but not others. Levels are denoted by indention in the Table of Contents. Wording, spelling, and capitalization of headings in the Table of Contents must match the heading in the body of the text exactly. If headings are numbered in the Table of Contents, they must be numbered correspondingly in the text.

List appendix or appendices (if applicable) in the Table of Contents, if more than five then create a separate List of Appendices. In either case, list the Appendices Heading Page (see page 3) in the Table of Contents. When listing an individual appendix, include its title.

If the Table of Contents is more than one page, subsequent pages should have the heading “TABLE OF CONTENTS (Continued)” and additionally "PAGE" underlined above the page numbers.

Return twice between the TABLE OF CONTENTS heading and the first item in the table.

Do not underline, bold, or italicize in the Table of Contents (unless scientific species name)

TABLE OF CONTENTS

1 Chapter Title

1.1 Level 2 Heading

1.2 Level 2 Heading

1.2.1 Level 3 Heading

1.2.2 Level 3 Heading

1.2.3 Level 3 Heading

1.3 Level 2 Heading

2 Chapter Title

2.1 Level 2 Heading

2.2 Level 2 Heading

2.2.1 Level 3 Heading

2.2.2 Level 3 Heading

3 Chapter Title

3.1 Level 2 Heading

3.2 Level 2 Heading

Appendix A Title

Appendix B Title

Figure 10a. Table of Contents with Numbering.

Chapter Title

Level 2 Heading

Level 3 Heading

Figure 10b. Table of Contents without Numbering.

List of Figures

Lists are required if two or more figures appear within the text. (Reference figures 11a and 11b.)

List of Tables

Lists are required if two or more tables appear within the text. (Reference figures 11a and 11b.)

Choose one of the two methods of numbering in the model pages illustrated in Figures 11a and 11b and use it for both Lists of Figures and Lists of Tables. If a list is longer than one page, subsequent pages should be headed “LIST OF FIGURES (Continued)” or “LIST OF TABLES (Continued)" along with "Figure" or "Page" underlined above the figure names and page numbers. The first sentence of the figure or table caption must be listed, and the wording must match the text exactly. List only one page number per figure or table. When there is a legend page in front of a figure (see information on FIGURES below), list the legend page only. Figures in the appendices are listed on a separate List of Appendix Figures list.

Add two spaces between the LIST OF FIGURES/TABLES heading and the first listing.

LIST OF FIGURES

Name of the figure

First sentence of the legend matches the text exactly

List only one page number

Keep numbers and words in separate columns

Figure 11a. List of Figures/Tables with Consecutive Numbering.

LIST OF TABLES

Name of the table

Spacing requirements are the same as for the List of Figures

A List of Appendix Tables would look the same

All pretext headings should look the same

Figure 11b. List of Figures/Tables with Numbering by Chapter.

List of Appendices (optional)

If list of appendices is short, it may be attached to the Table of Contents. For more than 5 appendices, or list different heading levels are listed in the appendices, a separate List of Appendices is required. If two or more figures appear in the appendices, a List of Appendix Figures and/or a List of Appendix Tables are required.

List of Appendix Figures

For two or more figures in the appendices.

List of Appendix Tables

For two or more tables in the appendices.

Other Lists

If you are including other lists, such as lists of abbreviations, nomenclature, symbols, and so forth, each list must have its own page. The elements of these lists do not need numbering or page numbers.

Dedication (optional)

If desired, you may dedicate your document to the honor of someone. Dedications are usually short. Margin requirements apply. Use the same font/font size as text body. Arrangement of page is at your discretion.

Preface (optional)

You may include a preface.

II. Body of Text

Follow standard or manuscript document format.

III. Bibliography

Iv. appendix or appendices (optional), final requirements, printing specifications.

The Graduate School no longer requires you to submit a paper copy of your thesis/dissertation.

Formatting Template

A formatting template for thesis and dissertation pretext pages can be found on our website.

Electronic Submission

Submit one PDF copy of your thesis/dissertation, without signatures, electronically to ScholarsArchive. Ensure accessibility with Adobe Acrobat Pro. For uploading and accessibility instructions refer to the library's website.

Creative Commons License

DO NOT SELECT PUBLIC DOMAIN OR CCO. You may add a Creative Commons License to your item that allows copyrighted works to be shared and re- used. Either select License Type: Creative Commons or License Type: No Creative Commons License. DO NOT assign a Creative Commons license if you plan to place an embargo on your thesis or dissertation that allows only the OSU community access to your work.

Final Documents Submitted to the Graduate School

One signed Electronic Thesis and Dissertation (ETD) Submission Approval form by your Major Professor, Head/Chair/Director/Dean of your major, and yourself. The Graduate School Dean's signature will be added after the submissions of the form.

You can request an embargo in ScholarsArchive so your work will be accessible only to Oregon State University faculty, staff and students for up to two years.

Contact Info

Graduate School Heckart Lodge 2900 SW Jefferson Way Oregon State University Corvallis, OR 97331-1102

Phone: 541-737-4881 Fax: 541-737-3313

• Programs - Majors, minors and certificates
• Academic Progress
• Student Success
• Faculty Support
• Staff Directory
• Graduate Catalog

Ohio State nav bar

The Ohio State University

• BuckeyeLink
• Find People
• Search Ohio State

Dissertation Formatting Tips and Tricks

All instructions are written for Word 2007 for PC. The basic instructions are the same for most versions of Word but the actual key strokes maybe slightly different.

Setting Margins

• Put your cursor at the very beginning of your document
• Select the ‘Page Layout’ tab from the ribbon
• Select ‘Margins’ in the Page Setup box
• Select ‘Custom Margins’
• Set the margins

Inserting a Two Inch Top Margin for the First Page of Chapter/Major Section

• Before beginning a new chapter or equivalent (bibliography, abstract, vita, etc.) insert a hard page break by pressing the ‘Ctrl’ key and the ‘Enter’ key at the same time.
• To insert a two inch top margin if you are in single line spacing press the ‘Enter’ key six times. If you are in double line spacing press the ‘Enter’ key three times. This will move the cursor down an additional inch so the page will have a two inch top margin without affecting the rest of the pages in the section or document.

Page Numbers

Insert page numbers.

• Select ‘Insert’ tab from ribbon
• Select ‘Page Number’ from the Header & Footer box
• Select ‘Bottom of Page’
• Select ‘Plain Number 2’
• In the Position box move the bottom position to 1 inch (default is 0.5 inch)
• Close the Header & Footer

Cover Unwanted Page Numbers

• Go to the page with the unwanted page number
• Select the ‘Insert’ tab from the ribbon
• Select ‘Text Box’ from Text
• Select ‘Draw Text Box’ from the Text Box options
• Draw your box anywhere on the page except in the footer area
• Drag the box you drew to cover the page number
• Select ‘Shape Outline’ from the Shape Styles box
• Select ‘No Outline’

Beginning with Small Roman Numerals for Preliminary Pages

• Put your cursor at the end of the copyright page
• Select Page Layout’ from the ribbon
• Select ‘Breaks’ from the Page Setup box
• Select ‘Next Page’ from the Breaks list
• Insert page number as previously discussed
• Select ‘Format Page Number’
• Change ‘Number Format’ to small Roman numerals
• Change ‘Start at’ to  'ii' (small Roman II)

Note : Some versions of Word will insert page numbers on the title page and the copyright page even though the insert command is not until the abstract page. A simple method for addressing this is covered in ‘Cover Unwanted Page Numbers.’

Changing from Small Roman Numerals to standard Arabic Numbers

• Put your cursor at the end of the text on the last page of your preliminary pages
• Select ‘Page Layout’ from the ribbon
• Select ‘Breaks’ from the Page Setup Box
• Insert page number (see Insert Page Number)
• Change ‘Number Format’ to standard numerals (1, 2, 3, …)
• Change ‘Start at’ to Arabic 1

Putting a Page Number in the Portrait Position on a Landscaped Page

• Put your cursor on the landscaped page so you can see both the landscaped page number and the left margin (bottom edge when viewed in portrait orientation)
• Insert a text box described in 'Cover Unwanted Page Numbers'
• Cover the page number in the landscaped position
• Remove the box outline as discussed in 'Cover Unwanted Page Numbers'
• Draw a second text box on the same page
• Drag the second text box to the left margin approximately one inch from the left edge
• Type in the correct page number
• Rotate the text in the text box by selecting ‘Text Direction’ from the Text options
• Once the page number is in the correct orientation, remove the box outline
• You may have to adjust the size of the text box and move it slightly until it is in the correct placement

Table of Contents

Manually creating a table of contents.

Includes setting tab stops and leader dot tabs

• Type in the items you want to appear in the Table of Contents. At minimum the Table of Contents must include the abstract, dedication (if present in document), acknowledgments (if present in document), vita, list of tables (if present in document), list of figures (if present in document) each chapter with the chapter title, bibliography, each appendix as a separate entry (if appendices are in your document). These items are level one in the Table of Contents. How detailed the table of contents is up to you and your committee. Subheading within these major divisions would be indented based on their level in the text of your document. Every entry in the Table of Contents must have leader dots from the end of the entry to the page number where it begins (see below)
• After the entry press the tab key once and then type the page number when the entry begins
• Select the table of contents
• Select the ‘Page Layout’ tab
• Go to the ‘Paragraph’ Box and open the dialogue box (click on the small box in the lower right corner of the box.)
• Select tabs
• Set tab stops for any sub levels within your Table of Contents by inserting the position (in inches) and clicking ‘set.’ These tabs should be left aligned. The first level of the table of contents does not need to be set as it is the left margin of the page
• Set a tab stop for the page number positions (between 5” and 5.75” is usually a good spacing for the page number placement). Leave as a left aligned tab (the left edge of the numbers will line-up) or select right aligned tab (the right edge of the numbers will line up). Select the appropriate leader dots (the periods—usually the second option). Click ‘set’
• Click ‘okay’

Word Created Table of Contents

Using styles.

Once all titles, major headings, and subtitle headings have been formatted using Styles, place the cursor on the Table of Contents page

• Select the ‘References’ tab
• Select ‘Table of Contents’
• Select the format
• The Table of Contents should generate

Not Using Styles

• Go to the first item to appear in the Table of Contents (usually ‘Abstract’)
• Highlight the title
• Select ‘Add Text’ from the Table of Contents box
• Select level

Note: if you did not use Styles marking the item for inclusion in the Table of Contents may change how it appears on the text page. Correcting the format on the text page may change how it appears in the Table of Contents

• Turn Styles on
• From Home tab, go to Styles box, click on small box in the lower right corner to open the Styles window
• Select Style to modify by hovering over the Style title with the cursor
• Click on the down arrow on the right side of the Style
• From the menu that appears select ‘Modify’
• To change the font size, add or remove bold, change color, and justification, make changes as normal in the modify box
• To change spacing above or below, click on ‘Format’ and select ‘Paragraph’
• Adjust up or down
• To remove or add accent line click on ‘Format’ and select ‘Borders’
• Select ‘No Borders’ and click ‘okay’

Dissertation and Theses

The dissertation is the hallmark of the research expertise demonstrated by a doctoral student. It is a scholarly contribution to knowledge in the student’s area of specialization. 

A thesis is a hallmark of some master’s programs. It is a piece of original research, generally less comprehensive than a dissertation and is meant to show the student’s knowledge of an area of specialization.

Still Have Questions?

Dissertations & Theses 614-292-6031 [email protected]

Doctoral Exams, Master's Examination, Graduation Requirements 614-292-6031 [email protected]

Thesis and Dissertation Formatting

Introduction.

The requirements listed in the Thesis and Dissertation Formatting Requirements apply to the formal master’s thesis and the doctoral dissertation.

The thesis or dissertation is a report of original research and scholarly work that is shared with the academic community and is made available to the public. The thesis or dissertation becomes part of the UWM Digital Commons and is also made available through ProQuest. Information about submission can be found on the Electronic Thesis & Dissertation Submission website.

These format standards have been developed to ensure a degree of consistency in the written presentation of this research across academic disciplines.

The Graduate School will not accept theses or dissertations that do not conform to these requirements. Have your formatting reviewed by the Graduate School by the formatting deadline .

• All students: email a draft to [email protected]

General Instructions

Required page order, preliminary pages:.

• Title page – required
• Abstract page – required
• Copyright page – optional
• Dedication – optional
• Table of Contents – required for all except creative works
• List of Figures – required if figures appear in thesis
• List of Tables – required if tables appear in the thesis
• List of Abbreviations – optional
• Acknowledgements – required if permission to reproduce copyright material is necessary
• Frontispiece (illustration) or Epigraph (quotation) – optional
• Appendices – optional

Thesis and Dissertation Formatting Resources:

• Manual (PDF) • Presentation (.pptx) • Thesis Formatting Template (.docx) • Dissertation Formatting Template (.docx) • Checklist (PDF)

Double space throughout, with the exception of the title page; captions; table or figure headings; extensive quotations; footnotes or endnotes; entries in the References section; entries in the Table of Contents; and appendices.

Any standard font is acceptable; however, the same font should be used throughout. Use a font size of approximately 12. The only exceptions to this font size are captions (not smaller than 9 point) and headings (not larger than 20 point).

ALL pages must have 1″ top, bottom, left, and right margins.

Preliminary Pages

Preliminary pages are the required pages that appear at the beginning of the final document. There are also optional pages which can be placed in this section.

Page Numbering

All preliminary pages are numbered with lower case Roman numerals, centered at the bottom of the page, with the bottom of the number at least 1/2 inch from the edge of the page. The exception to this is the title page, which is counted but not numbered.

Sample pages (PDF)

Pages appear in this order

• Title page – Required The title page is counted but not numbered. Follow the format shown in the sample pages (PDF) . All items centered and TITLE IN ALL CAPS. Use official degree names only. The date is the month and year of degree conferral. Degrees are awarded three times a year: in May, August, and December.
• Abstract – Required The abstract is a summary of the dissertation. Follow the format shown in the sample pages (PDF) . Copy the abstract heading sample exactly. See Sample ABSTRACT TEXT for important information. It always starts with page number “ii”.
• Copyright and Your Dissertation or Thesis (ProQuest) (PDF)
• copyright.gov
• UWM Libraries: Copyright and Fair Use
• Dedication – Optional May be combined with acknowledgements. There is no required heading on this page.
• Table of Contents – Required for all except creative works. The Table of Contents lists all sections that follow it (with the exception of an epigraph or frontispiece). Type TABLE OF CONTENTS centered at the top of the page, double space and begin the entries. Single space within entries and double space in-between entries.
• List of Figures – Required if figures appear in the thesis. Type LIST OF FIGURES centered at the top of the page, double space and begin. The term figures includes various non-text items. List the number, caption, and page number of each figure. Figures should be numbered consecutively throughout the thesis.
• List of Tables – Required if tables appear in the thesis. Type LIST OF TABLES at the top of the page, double space and begin. List the number, caption, and page number of each table. Tables should be numbered consecutively throughout the thesis.
• List of Abbreviations (or List of Symbols, or Nomenclature) – Optional, include as necessary. Format heading the same as List of Figures.
• Acknowledgments – Required if permission to reproduce copyrighted material is necessary. Type ACKNOWLEDGMENTS at the top of the page, double space, and begin the remarks.
• Frontispiece (illustration) or Epigraph (quotation) – Optional The source of the epigraph is listed below the quotation, but is not listed in the bibliography unless it is also cited in the main text.

Beginning with the text of the thesis, the page numbering changes to Arabic numerals, centered at the bottom of the page, with at least 1/2″ clearance from each edge. The first page of the main text is page 1, and should be displayed on the page. All subsequent pages are numbered throughout the text.

Tables and Figures

All illustrative materials must maintain the same margins as the rest of the thesis. 1″ top, bottom, left, and right margins

All illustrative material must be large enough to be easily read. Minimum font size is 9.

Landscape format

In order to maintain the required page margins for tables or figures, it may be necessary to print them in landscape format. The top margin will now be the edge that is bound. However, the page number must be placed on the page as though the page was in portrait format. It needs to appear in the same location and have the same text direction as the other (portrait) pages. See Thesis and Dissertation Formatting (.pptx) for additional help and examples.

Figure Captions

If space permits, the caption should appear on the same page as the figure. Font size must not be smaller than 9 point.

References and Citations

Any of the standard style manuals may be used as a guide in formatting references to works cited in the thesis. References may be placed at the end of the main text, or at the end of each chapter. Endnotes and/or footnotes may also be used. Whatever format is chosen, it must be followed consistently throughout the thesis.

If you are not following a style manual, please single space within each entry and double space between the entries.

Reference pages are numbered. Use the next consecutive page number of your document for your references.

All material included in the appendices must meet minimum font and margin requirements.

Many theses will not need this section. Material that supports the research, but is not essential to an understanding of the text, is placed in the appendices. Examples include raw data, extensive quotations, and survey or test instruments.

If there is only one appendix, it is simply called Appendix, not Appendix A. If there are multiple, appendices should be designated A: Title B: Title C: Title etcetera. Each appendix and its title and page number are listed in the Table of Contents.

Start the Appendix or Appendices with the next consecutive page number. The Appendix or Appendices should be listed in the Table of Contents.

The appendix title can be on its own page, or at the beginning of the actual material. See sample pages for examples.

Search for books, articles, and more

Search the list of databases available through Johns Hopkins

Get started by using subject guides compiled by our librarians

Get Materials

• BorrowDirect Request books and other items from partner libraries. JHED ID required.
• Interlibrary Loan Request scanned articles, chapters, and more from non-JHU libraries. JHED ID required.
• Document Delivery via ILL Request scanned articles and chapters from JHU Libraries and the Libraries Service Center. JHED ID required.
• Journal Search Look for online journals and periodicals available from JHU libraries.
• Citation Linker Find a specific article or book by searching citation information.
• eReserves Access online articles and media reserved for courses.
• Formatting Requirements

Electronic Theses & Dissertations (ETDs)

• Submission Checklist
• Submission Deadlines

Required formatting for submission to be completed.

Elements of an Electronic Thesis or Dissertation

The most important page to get right.

• What to include
• How to format it

Download Example (PDF)

Front Matter

• Table of contents, abstract, lists, etc
• Guidelines for deciding what to include and in which order

General Formatting

• Order of required content
• Spacing and type
• PDF/A export

Annotated Title Page Example

Download Annotated Front Matter (PDF)

PDF/A Export

PDF/A is an ISO-standardized version of the Portable Document Format (PDF) specialized for the digital preservation of electronic documents. You need to save your dissertation as a PDF/A file and upload it as your official submission. For more information, see the Wikpedia article on the format.

Note for Mac users: that while you can save a Word for Windows document as a PDF/A (see below for instructions) you cannot do so directly from Word for Mac. If you are a Mac user, consider saving your Word document as a PDF/A using a Windows computer, such as at the library, or use Adobe Acrobat Pro.

Notes about PDF/A format

• you cannot include audio and video content; still images are fine
• you cannot include JavaScript or executable files
• fonts must be embedded

If you need to include audio, video, or other files, you can submit them as supplementary files. Contact us at [email protected] for more help with PDF/A or supplementary files.

Adobe Acrobat Pro

• Select “PDF Standards” in the Tools menu
• Select “Preflight” in the right hand column
• Select “PDF/A Compliance”
• Double-click “Convert to PDF/A-1b” then “Save”
• Review your document to ensure it appears as you expect it to

Word for Windows

• Select “File” then “Save as Adobe PDF”
• Make sure file type is “pdf files”
• Select “Options” and a box with “PDF Options” will open
• Check the “Create PDF/A” box, then select “OK” and “Save”
• Follow the instructions for using a LaTeX template
• The Library does not provide support for LaTeX. Access a student-created template on GitHub

Contact ETD Office

Milton S. Eisenhower Library [email protected]

ETDs on JScholarship

Electronic theses and dissertations from JHU students. Go to ETDs

JScholarship Home

Open access publications from JHU faculty and students. Visit JScholarship

Please start by reviewing the formatting requirements and submission checklist .

If you have additional questions, email [email protected] for the fastest response.

If we are unable to resolve your inquiry via email, you may request an in-person meeting. Due to the volume of ETDs, we cannot meet on deadline days, or the two days before deadlines.

Please note we do not provide formatting reviews by email, only via the submission system .

Stack Exchange Network

Stack Exchange network consists of 183 Q&A communities including Stack Overflow , the largest, most trusted online community for developers to learn, share their knowledge, and build their careers.

Q&A for work

Connect and share knowledge within a single location that is structured and easy to search.

Right font style and size for a master thesis

I'm writing a master thesis for my master in economics.

Given that the thesis is not expected to be too much formal (the master itslef is very practical and little theoretical) I want to use good conventions.

So far this is the formatting I used:

• main title "Thesis of ...": Arial 16pt
• Abstract subtitle: Times New Roman 12pt
• Abstract content: Times New Roman 11pt, justified
• Heading 1 (main sections of the paper): Arial 14 bold
• Heading 2 (sections of the paper, corresponding to Headings 1): Arial 12 bold
• Content of each sections (Headings 2): Times New Roman 12pt justified . The content is starting after a blank line

How can I improve the formatting to make the paper looking professional? Thanks in advance

• academic-writing

• 3 Does your university have any guidelines or a favorite style guide? –  Monica Cellio Commented Jan 7, 2015 at 1:59

Your academic department may have posted guidelines for this. For example, the Rutgers Graduate school has posted an Electronic Thesis and Dissertation Style Guide , complete with sample pages. They suggest an easy-to-read font in 10-12 point type, but other schools may have different requirements.

Many schools may require that you use an existing style guide, such as APA style , MLA style , or the Chicago Manual of Style . These will probably be available for use in a local library.

Your school may use one of these, or it may have posted its own style guide, or use a hybrid of them. Check with your department website and your department advisor; they will be the final arbiter.

• as far as I know there are no guidelines. I will send them an e-mail. I just wondered if there existed any good practice –  dragonmnl Commented Jan 7, 2015 at 12:38

Your Answer

Reminder: Answers generated by artificial intelligence tools are not allowed on Writing Stack Exchange. Learn more

Sign up or log in

Post as a guest.

Required, but never shown

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy .

Not the answer you're looking for? Browse other questions tagged formatting academic-writing or ask your own question .

• Featured on Meta
• Bringing clarity to status tag usage on meta sites
• We've made changes to our Terms of Service & Privacy Policy - July 2024
• Announcing a change to the data-dump process

Hot Network Questions

• magnetic boots inverted
• Why is "on" the optimal preposition in "tilt on its axis"?
• Is it possible to calculate FPS (frames per second) of video using statistical data?
• I'm trying to remember a novel about an asteroid threatening to destroy the earth. I remember seeing the phrase "SHIVA IS COMING" on the cover
• Why is Legion helping you whilst geth are fighting you?
• How can I get the Thevenin equivalent of this circuit?
• Why was this lighting fixture smoking? What do I do about it?
• Who was the "Dutch author", "Bumstone Bumstone"?
• Where does the energy in ion propulsion come from?
• What happens if all nine Supreme Justices recuse themselves?
• Stuck on Sokoban
• How can these humans cross the ocean(s) at the first possible chance?
• My school wants me to download an SSL certificate to connect to WiFi. Can I just avoid doing anything private while on the WiFi?
• Planning to rebuild detached storage room (in the US)
• Using \tl_put_right with grouping from latex3 explsyntax
• Regression techniques for a “triangular” scatterplot
• Has the US said why electing judges is bad in Mexico but good in the US?
• Is the spectrum of Hawking radiation identical to that of thermal radiation?
• Why does a halfing's racial trait lucky specify you must use the next roll?
• Can Shatter damage Manifest Mind?
• How would you say a couple of letters (as in mail) if they're not necessarily letters?
• Where to donate foreign-language academic books?
• How did Oswald Mosley escape treason charges?
• Why is the movie titled "Sweet Smell of Success"?