objectives of my dissertation

• Aims and Objectives – A Guide for Academic Writing
• Doing a PhD

One of the most important aspects of a thesis, dissertation or research paper is the correct formulation of the aims and objectives. This is because your aims and objectives will establish the scope, depth and direction that your research will ultimately take. An effective set of aims and objectives will give your research focus and your reader clarity, with your aims indicating what is to be achieved, and your objectives indicating how it will be achieved.

Introduction

There is no getting away from the importance of the aims and objectives in determining the success of your research project. Unfortunately, however, it is an aspect that many students struggle with, and ultimately end up doing poorly. Given their importance, if you suspect that there is even the smallest possibility that you belong to this group of students, we strongly recommend you read this page in full.

This page describes what research aims and objectives are, how they differ from each other, how to write them correctly, and the common mistakes students make and how to avoid them. An example of a good aim and objectives from a past thesis has also been deconstructed to help your understanding.

What Are Aims and Objectives?

Research aims.

A research aim describes the main goal or the overarching purpose of your research project.

In doing so, it acts as a focal point for your research and provides your readers with clarity as to what your study is all about. Because of this, research aims are almost always located within its own subsection under the introduction section of a research document, regardless of whether it’s a thesis , a dissertation, or a research paper .

A research aim is usually formulated as a broad statement of the main goal of the research and can range in length from a single sentence to a short paragraph. Although the exact format may vary according to preference, they should all describe why your research is needed (i.e. the context), what it sets out to accomplish (the actual aim) and, briefly, how it intends to accomplish it (overview of your objectives).

To give an example, we have extracted the following research aim from a real PhD thesis:

Example of a Research Aim

The role of diametrical cup deformation as a factor to unsatisfactory implant performance has not been widely reported. The aim of this thesis was to gain an understanding of the diametrical deformation behaviour of acetabular cups and shells following impaction into the reamed acetabulum. The influence of a range of factors on deformation was investigated to ascertain if cup and shell deformation may be high enough to potentially contribute to early failure and high wear rates in metal-on-metal implants.

Note: Extracted with permission from thesis titled “T he Impact And Deformation Of Press-Fit Metal Acetabular Components ” produced by Dr H Hothi of previously Queen Mary University of London.

Research Objectives

Where a research aim specifies what your study will answer, research objectives specify how your study will answer it.

They divide your research aim into several smaller parts, each of which represents a key section of your research project. As a result, almost all research objectives take the form of a numbered list, with each item usually receiving its own chapter in a dissertation or thesis.

Following the example of the research aim shared above, here are it’s real research objectives as an example:

Example of a Research Objective

• Develop finite element models using explicit dynamics to mimic mallet blows during cup/shell insertion, initially using simplified experimentally validated foam models to represent the acetabulum.
• Investigate the number, velocity and position of impacts needed to insert a cup.
• Determine the relationship between the size of interference between the cup and cavity and deformation for different cup types.
• Investigate the influence of non-uniform cup support and varying the orientation of the component in the cavity on deformation.
• Examine the influence of errors during reaming of the acetabulum which introduce ovality to the cavity.
• Determine the relationship between changes in the geometry of the component and deformation for different cup designs.
• Develop three dimensional pelvis models with non-uniform bone material properties from a range of patients with varying bone quality.
• Use the key parameters that influence deformation, as identified in the foam models to determine the range of deformations that may occur clinically using the anatomic models and if these deformations are clinically significant.

It’s worth noting that researchers sometimes use research questions instead of research objectives, or in other cases both. From a high-level perspective, research questions and research objectives make the same statements, but just in different formats.

Taking the first three research objectives as an example, they can be restructured into research questions as follows:

Restructuring Research Objectives as Research Questions

• Can finite element models using simplified experimentally validated foam models to represent the acetabulum together with explicit dynamics be used to mimic mallet blows during cup/shell insertion?
• What is the number, velocity and position of impacts needed to insert a cup?
• What is the relationship between the size of interference between the cup and cavity and deformation for different cup types?

Difference Between Aims and Objectives

Hopefully the above explanations make clear the differences between aims and objectives, but to clarify:

• The research aim focus on what the research project is intended to achieve; research objectives focus on how the aim will be achieved.
• Research aims are relatively broad; research objectives are specific.
• Research aims focus on a project’s long-term outcomes; research objectives focus on its immediate, short-term outcomes.
• A research aim can be written in a single sentence or short paragraph; research objectives should be written as a numbered list.

How to Write Aims and Objectives

Before we discuss how to write a clear set of research aims and objectives, we should make it clear that there is no single way they must be written. Each researcher will approach their aims and objectives slightly differently, and often your supervisor will influence the formulation of yours on the basis of their own preferences.

Regardless, there are some basic principles that you should observe for good practice; these principles are described below.

Your aim should be made up of three parts that answer the below questions:

• Why is this research required?
• What is this research about?
• How are you going to do it?

The easiest way to achieve this would be to address each question in its own sentence, although it does not matter whether you combine them or write multiple sentences for each, the key is to address each one.

The first question, why , provides context to your research project, the second question, what , describes the aim of your research, and the last question, how , acts as an introduction to your objectives which will immediately follow.

Scroll through the image set below to see the ‘why, what and how’ associated with our research aim example.

Note: Your research aims need not be limited to one. Some individuals per to define one broad ‘overarching aim’ of a project and then adopt two or three specific research aims for their thesis or dissertation. Remember, however, that in order for your assessors to consider your research project complete, you will need to prove you have fulfilled all of the aims you set out to achieve. Therefore, while having more than one research aim is not necessarily disadvantageous, consider whether a single overarching one will do.

Research Objectives

Each of your research objectives should be SMART :

• Specific – is there any ambiguity in the action you are going to undertake, or is it focused and well-defined?
• Measurable – how will you measure progress and determine when you have achieved the action?
• Achievable – do you have the support, resources and facilities required to carry out the action?
• Relevant – is the action essential to the achievement of your research aim?
• Timebound – can you realistically complete the action in the available time alongside your other research tasks?

In addition to being SMART, your research objectives should start with a verb that helps communicate your intent. Common research verbs include:

Table of Research Verbs to Use in Aims and Objectives

Last, format your objectives into a numbered list. This is because when you write your thesis or dissertation, you will at times need to make reference to a specific research objective; structuring your research objectives in a numbered list will provide a clear way of doing this.

To bring all this together, let’s compare the first research objective in the previous example with the above guidance:

Checking Research Objective Example Against Recommended Approach

Research Objective:

1. Develop finite element models using explicit dynamics to mimic mallet blows during cup/shell insertion, initially using simplified experimentally validated foam models to represent the acetabulum.

Checking Against Recommended Approach:

Q: Is it specific? A: Yes, it is clear what the student intends to do (produce a finite element model), why they intend to do it (mimic cup/shell blows) and their parameters have been well-defined ( using simplified experimentally validated foam models to represent the acetabulum ).

Q: Is it measurable? A: Yes, it is clear that the research objective will be achieved once the finite element model is complete.

Q: Is it achievable? A: Yes, provided the student has access to a computer lab, modelling software and laboratory data.

Q: Is it relevant? A: Yes, mimicking impacts to a cup/shell is fundamental to the overall aim of understanding how they deform when impacted upon.

Q: Is it timebound? A: Yes, it is possible to create a limited-scope finite element model in a relatively short time, especially if you already have experience in modelling.

Q: Does it start with a verb? A: Yes, it starts with ‘develop’, which makes the intent of the objective immediately clear.

Q: Is it a numbered list? A: Yes, it is the first research objective in a list of eight.

Mistakes in Writing Research Aims and Objectives

1. making your research aim too broad.

Having a research aim too broad becomes very difficult to achieve. Normally, this occurs when a student develops their research aim before they have a good understanding of what they want to research. Remember that at the end of your project and during your viva defence , you will have to prove that you have achieved your research aims; if they are too broad, this will be an almost impossible task. In the early stages of your research project, your priority should be to narrow your study to a specific area. A good way to do this is to take the time to study existing literature, question their current approaches, findings and limitations, and consider whether there are any recurring gaps that could be investigated .

Note: Achieving a set of aims does not necessarily mean proving or disproving a theory or hypothesis, even if your research aim was to, but having done enough work to provide a useful and original insight into the principles that underlie your research aim.

2. Making Your Research Objectives Too Ambitious

Be realistic about what you can achieve in the time you have available. It is natural to want to set ambitious research objectives that require sophisticated data collection and analysis, but only completing this with six months before the end of your PhD registration period is not a worthwhile trade-off.

3. Formulating Repetitive Research Objectives

Each research objective should have its own purpose and distinct measurable outcome. To this effect, a common mistake is to form research objectives which have large amounts of overlap. This makes it difficult to determine when an objective is truly complete, and also presents challenges in estimating the duration of objectives when creating your project timeline. It also makes it difficult to structure your thesis into unique chapters, making it more challenging for you to write and for your audience to read.

Fortunately, this oversight can be easily avoided by using SMART objectives.

Hopefully, you now have a good idea of how to create an effective set of aims and objectives for your research project, whether it be a thesis, dissertation or research paper. While it may be tempting to dive directly into your research, spending time on getting your aims and objectives right will give your research clear direction. This won’t only reduce the likelihood of problems arising later down the line, but will also lead to a more thorough and coherent research project.

Finding a PhD has never been this easy – search for a PhD by keyword, location or academic area of interest.

Browse PhDs Now

Join thousands of students.

Join thousands of other students and stay up to date with the latest PhD programmes, funding opportunities and advice.

Research Voyage

Research Tips and Infromation

How to Write Aims and Objectives for your Dissertation or Thesis?

Introduction

Understanding aims and objectives, crafting aims, break it down into objectives, developing specific objectives, align with research questions, consider feasibility, review and refine, seek feedback, documenting aims and objectives.

In a PhD or Post Graduate dissertation, the aims and objectives play a crucial role in shaping the research process and ensuring focus. They provide a clear roadmap for your study and serve as the guiding principles that steer your research in the right direction.

Aims represent the broader purpose or the overarching goal of your research. They define what you want to achieve with your dissertation. For example, let’s say you’re conducting a study on renewable energy sources. Your aim could be to analyze the economic viability and environmental impact of solar energy adoption in residential areas.

Objectives, on the other hand, break down the aim into specific, measurable, and achievable targets that help you accomplish your research goal. They outline the specific steps or tasks you need to undertake to fulfill the aim. Continuing with the previous example, some objectives could be:

• Evaluate the current state of solar energy technologies and their efficiency.
• Assess the economic costs and benefits associated with the installation of solar panels in residential areas.
• Analyze the environmental impact of solar energy adoption in terms of carbon emissions reduction.
• Investigate the potential barriers to the widespread adoption of solar energy in residential communities.
• Develop recommendations for policymakers and stakeholders to promote the use of solar energy in residential areas.

These objectives, when combined, address different aspects related to the aim of analyzing the economic viability and environmental impact of solar energy adoption. Each objective guides a specific aspect of the research and contributes to answering the research questions.

By having clear aims and objectives, you establish a solid framework for your study. They help you stay focused on the main purpose of your research and prevent you from getting sidetracked or overwhelmed by tangential topics. Moreover, they provide clarity to both you and your readers, ensuring that your research remains coherent and well-structured.

In summary, clear aims and objectives are instrumental in guiding the research process of a PhD dissertation. They provide a roadmap, define the research goal, and break it down into specific targets. Through the example provided, it is evident how aims and objectives bring focus to a study on renewable energy sources and solar energy adoption in residential areas.

If you are in paucity of time, not confident of your writing skills and in a hurry to complete the writing task then you can think of hiring a research consultant that solves all your problems. Please visit my article on Hiring a Research consultant for your PhD tasks for further details.

Aims and objectives play a crucial role in guiding research projects. It’s important to define these terms and differentiate between them to ensure a clear focus in your work.

Aims represent the broader purpose or goal of your study. They define what you aim to achieve through your research project. Aims provide the overarching context and direction for your work, guiding the selection of topics, methodologies, and outcomes.

Example: Suppose you’re working on a PhD dissertation in computer science with a focus on natural language processing. Your aim could be: “To develop an efficient and accurate algorithm for sentiment analysis in social media data.”

In this example, the aim highlights the objective of creating an algorithm specifically for sentiment analysis in social media data, indicating the main objective of your research.

Objectives break down the aim into specific, measurable, and achievable targets that contribute to achieving the overall goal. They are more focused and concrete than aims, outlining the steps or tasks necessary to fulfill the aim. Objectives serve as the building blocks of your research, guiding the implementation and evaluation of your work.

Example: Continuing with the previous aim, let’s define some specific objectives:

• Collect and preprocess a large dataset of social media posts for sentiment analysis.
• Explore and compare existing sentiment analysis techniques to identify their limitations and strengths.
• Design and develop a novel algorithm that addresses the limitations of current approaches.
• Implement the algorithm and evaluate its performance on the collected dataset.
• Analyze the results and compare them with existing state-of-the-art sentiment analysis methods.

These objectives, when combined, address different aspects necessary to fulfill the aim of developing an efficient and accurate sentiment analysis algorithm for social media data. Each objective represents a specific task or milestone that contributes to the overall research goal.

The relationship between aims and objectives is critical in driving research. Objectives are derived from the aim and provide the means to accomplish it. They act as stepping stones, guiding the researcher towards achieving the broader aim.

In summary, aims provide the broader context and goal, while objectives break down the aim into specific tasks and milestones. Together, they ensure focus and direction in your research, guiding the selection of topics, methodologies, and outcomes. The objectives serve as the means to achieve the overall aim, highlighting the relationship between aims and objectives in driving research in the computer science domain.

Formulating the overarching aim of your research is a crucial step in defining the direction and purpose of your dissertation. The aim represents the primary goal or intention of your study, and crafting it effectively is essential for setting the foundation of your research.

Research Topic: Enhancing cybersecurity in cloud computing environments.

In this example, the aim focuses on improving cybersecurity in the context of cloud computing. The aim should be formulated in a concise and focused manner that aligns with the research topic. Here’s an example of how the aim could be crafted effectively:

Aim: Develop an efficient and robust security framework for ensuring data confidentiality, integrity, and availability in cloud computing environments.

The above aim encapsulates the overall goal of the research, which is to develop a security framework for enhancing cybersecurity in cloud computing. It clearly states the intention to address key aspects such as data confidentiality, integrity, and availability. The aim is concise, specific, and directly aligned with the research topic.

The significance of a well-defined aim cannot be overstated. It serves as a guiding beacon throughout your research journey, providing a clear direction and purpose. A well-crafted aim helps you stay focused and ensures that your efforts are aligned with the research’s core objectives. It also helps you communicate the purpose of your study to others, including your advisor, peers, and potential readers of your dissertation.

Additionally, an effective aim sets the stage for the subsequent development of specific objectives and research questions. It serves as a foundation upon which you can break down the aim into smaller, manageable objectives that contribute to achieving the overall research goal. Each objective should align with the aim and work together harmoniously to address the research questions and gaps in the field.

Moreover, a concise and aligned aim allows readers to quickly grasp the essence of your research. It provides them with a clear understanding of the research’s scope and purpose. By stating the aim concisely and aligning it with the research topic, you demonstrate your ability to articulate the core objective of your study in a succinct manner.

In summary, crafting effective aims involves formulating the overarching goal or intention of your research in a concise and focused manner. A well-defined aim sets the direction for your dissertation, guiding your efforts and ensuring alignment with the research topic. It serves as a foundation for the development of specific objectives and research questions. By presenting a clear and aligned aim, you convey the purpose of your study to others and demonstrate your ability to articulate the core objective of your research.

After defining the aim of your research, it’s important to break it down into smaller, manageable objectives. These objectives should address key research questions or subtopics that are necessary to achieve the overall aim. Additionally, objectives should be specific, measurable, and utilize action verbs to describe the intended actions or achievements.

Example: Suppose the aim of your research is to develop a recommendation system for an e-commerce platform. Here are some examples of specific objectives:

• Action Verbs: Analyze, Identify
• Description: Gather and analyze user preferences and historical data from the e-commerce platform to identify patterns in user behavior and item preferences.
• Action Verbs: Design, Implement
• Description: Develop and implement collaborative filtering algorithms, such as user-based or item-based methods, to generate personalized recommendations based on user similarities or item similarities.
• Action Verbs: Incorporate
• Description: Integrate machine learning techniques, such as matrix factorization or deep learning models, into the recommendation system to improve the accuracy and personalization of the recommendations.
• Action Verbs: Evaluate
• Description: Conduct experiments and evaluate the performance of the recommendation system using appropriate evaluation metrics, such as precision, recall, or mean average precision, to assess the effectiveness and efficiency of the system.
• Action Verbs: Optimize
• Description: Identify and implement optimization techniques, such as parallel computing or distributed systems, to enhance the scalability and efficiency of the recommendation algorithm, allowing it to handle large-scale datasets and real-time recommendations.

By breaking down the aim into these specific objectives, you address key components of developing a recommendation system, such as data analysis, algorithm design, evaluation, and optimization. Each objective represents a distinct step that contributes to achieving the overall aim.

Importantly, these objectives are specific and measurable, allowing you to determine whether you have successfully achieved them. For instance, you can measure the accuracy of the recommendation system, evaluate its performance against baseline models, or assess its scalability in terms of handling large datasets.

In summary, when conducting research, breaking down the aim into specific objectives helps in managing the workload and providing a clear roadmap for your research. These objectives should address key research questions or subtopics, be specific and measurable, and use action verbs to describe the intended actions or achievements. By following this approach, you can ensure a systematic and focused research process.

To develop specific objectives for your research, you need to break down the overarching aim into smaller, measurable objectives. These objectives should be clear, specific, and actionable, providing a roadmap for your research and guiding the entire research process.

Aim: Develop a machine learning-based system for automated sentiment analysis in social media data.

Objective 1: Conduct a comprehensive literature review on existing sentiment analysis techniques and methodologies.

• Breakdown: This objective focuses on reviewing the literature in the field of sentiment analysis, specifically examining the various techniques and methodologies that have been developed and applied. It involves gathering and analyzing research papers, books, and other relevant sources to gain a comprehensive understanding of the existing knowledge in sentiment analysis.

Objective 2: Collect a large dataset of social media posts for training and evaluation.

• Breakdown: This objective entails the collection of a substantial amount of social media data that will be used as input for training and evaluating the machine learning model. It involves designing data collection mechanisms, such as web scraping or utilizing available APIs, to gather a diverse set of social media posts from platforms like Twitter or Facebook.

Objective 3: Design and implement a machine learning algorithm capable of accurately detecting sentiment polarity in social media text.

• Breakdown: This objective focuses on the development of a machine learning algorithm tailored for sentiment analysis in social media text. It involves designing and implementing the necessary algorithms, selecting appropriate feature representations, and training a model to accurately classify sentiment polarity (positive, negative, or neutral) of social media posts.

Objective 4: Evaluate the performance of the developed sentiment analysis system against benchmark datasets and compare it with existing state-of-the-art approaches.

• Breakdown: This objective involves assessing the performance of the developed sentiment analysis system by evaluating it against established benchmark datasets. It requires selecting appropriate evaluation metrics and comparing the system’s performance with existing state-of-the-art approaches in sentiment analysis, such as accuracy, precision, recall, or F1 score.

The importance of clear, specific objectives cannot be overstated. These objectives provide a clear roadmap and direction for your research, guiding your efforts and ensuring that you stay on track. They help you structure your research activities, allocate resources effectively, and measure progress along the way.

Using action verbs to articulate objectives effectively is another crucial aspect. Action verbs convey specific actions or achievements that need to be accomplished. They provide clarity and precision, leaving no room for ambiguity. For example:

By using action verbs, you explicitly state what needs to be done or achieved in each objective, making it easier to track progress and assess the completion of objectives.

In summary, developing specific objectives involves breaking down the overarching aim into smaller, measurable objectives. Clear and specific objectives provide a roadmap for your research and guide the entire research process. By using action verbs, you articulate objectives effectively, leaving no room for ambiguity. These objectives help structure your research activities, allocate resources effectively, and measure progress, ultimately leading to the successful completion of your research.

When formulating objectives for your research, it is essential to ensure that they align with the research questions you have formulated. Each objective should contribute to addressing or answering a specific research question, creating a cohesive and focused research framework.

Example: Suppose your research in computer science focuses on developing an automated system for detecting and preventing cybersecurity threats. Here are examples of objectives aligned with research questions:

Research Question: How can machine learning algorithms be utilized to detect and mitigate cybersecurity threats effectively?

Objective 1: Evaluate and compare different machine learning algorithms for cybersecurity threat detection.

• Description: Explore and assess various machine learning algorithms, such as decision trees, random forests, or neural networks, to identify the most suitable approach for detecting cybersecurity threats accurately and efficiently.

Objective 2: Develop a dataset representative of diverse cybersecurity threats.

• Description: Create a comprehensive dataset containing various types of cybersecurity threats, including malware, phishing attacks, and network intrusions, to train and evaluate the machine learning models effectively.

Research Question: What are the key challenges and vulnerabilities in existing cybersecurity systems that need to be addressed?

Objective 3: Conduct a systematic analysis of existing cybersecurity systems and identify vulnerabilities.

• Description: Analyze and evaluate existing cybersecurity systems, such as intrusion detection systems or antivirus software, to identify vulnerabilities, weaknesses, and potential areas of improvement that can inform the development of a more robust automated system.

Objective 4: Propose novel techniques to enhance the resilience of the cybersecurity system.

• Description: Develop innovative approaches, such as anomaly detection algorithms or behavior-based analysis techniques, to enhance the resilience of the automated cybersecurity system and address the identified vulnerabilities.

By aligning the objectives with the research questions, you ensure that each objective contributes to addressing a specific aspect of your research. For example, Objective 1 directly addresses the research question regarding the utilization of machine learning algorithms for cybersecurity threat detection. Objective 3 focuses on analyzing existing systems to identify vulnerabilities, which is in line with the question about challenges and vulnerabilities in existing cybersecurity systems.

The alignment between research questions and objectives helps maintain a clear focus on the research objectives and ensures that your efforts are directed towards addressing the research questions. It also enhances the coherence of your research, as each objective becomes a stepping stone towards answering the research questions and achieving the overall aim of your study.

In summary, aligning objectives with research questions is crucial in research. It ensures that each objective contributes to answering or addressing a specific research question, creating a logical and cohesive framework for your study. By establishing this alignment, you can maintain a clear focus on the research objectives and make meaningful contributions to the field.

When setting objectives for your research, it is important to consider their feasibility. Feasibility refers to the realistic achievability of your objectives within the scope of your PhD research, taking into account available resources, time constraints, and other practical limitations.

Example: Suppose your research focuses on developing a new algorithm for real-time video processing and analysis. Here are examples of objectives that consider feasibility:

Objective 1: Implement the real-time video processing algorithm on a high-performance computing cluster.

• Feasibility Considerations: Before setting this objective, assess whether you have access to a high-performance computing cluster and the necessary resources (e.g., hardware, software, computational power) to support the implementation and testing of the algorithm. If such resources are available within your research environment or institution, this objective is feasible.

Objective 2: Collect and annotate a large-scale video dataset for algorithm training and evaluation.

• Feasibility Considerations: Consider the practical aspects of collecting and annotating a large-scale video dataset. Evaluate the time, manpower, and equipment required for this task. Assess whether you have access to the necessary resources (e.g., cameras, storage, annotation tools) and the capability to manage and process such a dataset. If these resources and capabilities are available within your research context, this objective is feasible.

Objective 3: Collaborate with industry partners to obtain real-world video data for testing and validation.

• Feasibility Considerations: Evaluate the feasibility of establishing collaborations with industry partners to obtain real-world video data. Consider factors such as data sharing agreements, legal and privacy considerations, and the willingness of industry partners to provide access to their data. Assess the potential challenges and limitations that may arise during this collaboration process. If such collaborations are feasible and can be established within the constraints of your research, this objective is feasible.

By considering feasibility, you ensure that your objectives are realistically achievable within the resources, time, and other constraints of your PhD research. It helps you avoid setting objectives that are too ambitious or beyond the scope of what you can reasonably accomplish.

Feasibility assessment is crucial in ensuring the successful completion of your research project. It allows you to allocate resources effectively, manage your time, and avoid potential pitfalls or setbacks that could hinder your progress. By setting feasible objectives, you can maintain a practical and manageable research plan that is more likely to lead to meaningful outcomes within the given constraints.

In summary, considering feasibility when setting objectives in computer science research is essential. Assess the available resources, time constraints, and practical limitations to ensure that your objectives are realistically achievable within the scope of your PhD research. By doing so, you can plan and execute your research effectively, making the most of the resources at your disposal and increasing the likelihood of successful outcomes.

Once you have defined your aims and objectives for your research, it’s important to review and refine them to ensure clarity, coherence, and logical flow. This step allows you to make any necessary revisions to ensure that your aims and objectives accurately reflect the scope and purpose of your research.

Example: Suppose your research in computer science focuses on developing a mobile application for enhancing cybersecurity awareness among smartphone users. Here’s an example of reviewing and refining aims and objectives:

Aim: Develop a mobile application for enhancing cybersecurity awareness among smartphone users.

Objective 1: Conduct a comprehensive literature review on cybersecurity awareness strategies and mobile application design principles.

• Review and Refinement: Upon review, you find that the objective is clear and aligned with the aim. However, you decide to refine it to include specific aspects you intend to cover in the literature review, such as user education techniques, persuasive design elements, and existing cybersecurity awareness mobile applications.

Objective 2: Design and develop a user-friendly mobile application prototype that delivers educational content and interactive features.

• Review and Refinement: During the review, you realize that the objective lacks specificity regarding the educational content and interactive features. You refine it to explicitly mention the inclusion of topics like phishing prevention, password management, and interactive quizzes to reinforce learning.

Objective 3: Conduct usability testing and collect feedback from potential users to evaluate the effectiveness of the mobile application.

• Review and Refinement: While reviewing, you realize that the objective could benefit from additional information. You refine it to include details such as the target user group (e.g., smartphone users aged 18-35), the number of participants you plan to involve in the usability testing, and the specific metrics you will use to evaluate the effectiveness of the application.

By reviewing and refining your aims and objectives, you ensure that they accurately capture the scope and purpose of your research. It helps you identify any gaps, ambiguities, or areas that need further clarification. Through this process, you can enhance the clarity, coherence, and logical flow of your aims and objectives, making them more robust and aligned with your research goals.

Additionally, reviewing and refining your aims and objectives allows you to align them with the current state of knowledge in the field. As you conduct literature reviews and gain more insights into existing research, you may discover the need to make adjustments to your aims and objectives to reflect the most relevant and up-to-date information.

In summary, reviewing and refining aims and objectives in research is essential to ensure clarity, coherence, and logical flow. By carefully reviewing each aim and objective, you can identify areas for improvement, refine them to include specific details, and align them with the current state of knowledge in the field. This process enhances the accuracy and effectiveness of your aims and objectives, providing a strong foundation for your research.

Once you have developed your aims and objectives for your research, it is important to seek feedback from your supervisor or peers. Sharing your aims and objectives with others allows you to gather valuable insights, suggestions, and perspectives that can help refine and improve your objectives, ensuring they are appropriate and aligned with your research.

Imagine you have formulated the following objectives for your computer science research on developing an intelligent tutoring system:

Objective 1: Conduct a literature review on existing intelligent tutoring systems and their effectiveness in enhancing student learning outcomes.

Objective 2: Design and develop an adaptive learning algorithm to personalize the tutoring experience based on individual student needs.

Objective 3: Implement a user-friendly interface for the intelligent tutoring system that provides an intuitive and engaging learning environment.

Objective 4: Evaluate the effectiveness of the developed intelligent tutoring system through a series of user studies and compare it with traditional tutoring methods.

At this stage, it would be beneficial to share your aims and objectives with your supervisor or peers to receive feedback. They can provide valuable insights and suggestions to help you refine and improve your objectives. For example:

• Your supervisor may suggest including a specific research question to further clarify the focus of Objective 1, such as “What are the key features and techniques used in successful intelligent tutoring systems?”
• Peers may provide feedback on the clarity and specificity of Objective 2, suggesting adding details on the specific adaptability mechanisms to be incorporated.
• Your supervisor might suggest considering the inclusion of usability testing as part of Objective 3 to ensure the interface meets the needs and preferences of the target users.
• Peers may offer suggestions on additional evaluation metrics or experimental setups to strengthen Objective 4 and provide more robust comparisons.

By seeking feedback, you open yourself up to constructive criticism and valuable perspectives that can help enhance the quality and effectiveness of your aims and objectives. Feedback from experienced researchers or knowledgeable peers can help you identify any potential gaps or weaknesses in your objectives and provide suggestions for improvement.

Remember that feedback is an iterative process, and it is important to carefully consider the suggestions provided while also critically evaluating them in the context of your research. Incorporating constructive feedback will help you refine your aims and objectives, ensuring they are robust, relevant, and aligned with your research goals.

In summary, seeking feedback on your aims and objectives is a valuable step in the process of developing your research. Sharing your objectives with your supervisor or peers allows you to gather insights, suggestions, and perspectives that can help refine and improve your objectives. Feedback helps ensure that your objectives are appropriate, clear, and aligned with your research goals, ultimately strengthening the overall quality of your research.

When writing your dissertation, it is crucial to properly document and present your aims and objectives. The placement and presentation of aims and objectives play a significant role in providing readers with a clear understanding of the research’s purpose and direction.

Placement: The aims and objectives of your research should be presented early on in your dissertation, typically within the introduction chapter. This allows readers to grasp the overall scope and intent of your research from the beginning. Placing them in the introduction helps set the context and provides a roadmap for the rest of the dissertation.

Presentation: When presenting aims and objectives, it is important to clearly distinguish between the two and articulate their role in driving the research. Here’s an example of how you can document aims and objectives:

Aims: Start by presenting the overarching aim of your research, which represents the primary goal or intention of your study. It should be a concise statement that captures the essence of your research focus.

For example:

Aim: The aim of this research is to develop a machine learning-based system for automated sentiment analysis in social media data.

Objectives: Following the aim, present a list of specific objectives that outline the key steps or milestones required to achieve the aim. Each objective should be clear, specific, and measurable. Here’s an example:

Objectives:

• Analyze existing sentiment analysis techniques and methodologies in the literature to identify their limitations and challenges.
• Collect and preprocess a large dataset of social media posts to serve as the training and evaluation data for the sentiment analysis system.
• Design and implement a machine learning algorithm capable of accurately detecting sentiment polarity in social media text.
• Evaluate the performance of the developed sentiment analysis system against existing state-of-the-art approaches, using appropriate evaluation metrics.
• Optimize the system for scalability and efficiency, allowing it to handle large volumes of real-time social media data.

By clearly documenting the aims and objectives in your dissertation, you provide readers with a clear understanding of the purpose and direction of your research. This enables them to follow your thought process and evaluate the relevance and significance of your study. Aims and objectives serve as guideposts that help readers navigate through your dissertation and understand the specific research questions you seek to address.

Moreover, the well-documented aims and objectives help you maintain focus throughout your research journey and provide a framework for organizing your dissertation. They establish the foundation upon which your methodology, analysis, and conclusions are built.

In summary, when documenting aims and objectives in a dissertation, it is important to place them in the introduction chapter and clearly present their role in guiding the research. Aims and objectives should be distinct, with the aim of capturing the overarching goal and the objectives outlining the specific steps or milestones to achieve it. By effectively documenting aims and objectives, you provide readers with a clear understanding of the research’s purpose and direction, facilitating their engagement with your work.

Crafting clear and well-defined aims and objectives is a critical aspect of writing a PhD or Post Graduate dissertation. These aims and objectives provide a solid foundation for your research, guiding your efforts and ensuring a focused and coherent study. Through this discussion, we have explored the importance of aims and objectives in a PhD dissertation and how they contribute to the research process.

Upcoming Events

• Visit the Upcoming International Conferences at Exotic Travel Destinations with Travel Plan
• Visit for  Research Internships Worldwide

Recent Posts

• EditPad Research Title Generator: Is It Helpful to Create a Title for Your Research?
• Are Postdoctoral Fellowships Taxable? A Guide to Understanding Tax Implications
• How to Get Off-Cycle Research/Academic Internships
• How to End Your Academic/Research Internship?
• PhD or Industry Job? A Comprehensive Career Guide
• All Blog Posts
• Research Career
• Research Conference
• Research Internship
• Research Journal
• Research Tools
• Uncategorized
• Research Conferences
• Research Journals
• Research Grants
• Internships
• Research Internships
• Email Templates
• Conferences
• Blog Partners
• Privacy Policy

Copyright © 2024 Research Voyage

Design by ThemesDNA.com

404 Not found

Dissertation Structure & Layout 101: How to structure your dissertation, thesis or research project.

By: Derek Jansen (MBA) Reviewed By: David Phair (PhD) | July 2019

So, you’ve got a decent understanding of what a dissertation is , you’ve chosen your topic and hopefully you’ve received approval for your research proposal . Awesome! Now its time to start the actual dissertation or thesis writing journey.

To craft a high-quality document, the very first thing you need to understand is dissertation structure . In this post, we’ll walk you through the generic dissertation structure and layout, step by step. We’ll start with the big picture, and then zoom into each chapter to briefly discuss the core contents. If you’re just starting out on your research journey, you should start with this post, which covers the big-picture process of how to write a dissertation or thesis .

*The Caveat *

In this post, we’ll be discussing a traditional dissertation/thesis structure and layout, which is generally used for social science research across universities, whether in the US, UK, Europe or Australia. However, some universities may have small variations on this structure (extra chapters, merged chapters, slightly different ordering, etc).

So, always check with your university if they have a prescribed structure or layout that they expect you to work with. If not, it’s safe to assume the structure we’ll discuss here is suitable. And even if they do have a prescribed structure, you’ll still get value from this post as we’ll explain the core contents of each section.  

Overview: S tructuring a dissertation or thesis

• Acknowledgements page
• Abstract (or executive summary)
• Table of contents , list of figures and tables
• Chapter 1: Introduction
• Chapter 2: Literature review
• Chapter 3: Methodology
• Chapter 4: Results
• Chapter 5: Discussion
• Chapter 6: Conclusion
• Reference list

As I mentioned, some universities will have slight variations on this structure. For example, they want an additional “personal reflection chapter”, or they might prefer the results and discussion chapter to be merged into one. Regardless, the overarching flow will always be the same, as this flow reflects the research process , which we discussed here – i.e.:

• The introduction chapter presents the core research question and aims .
• The literature review chapter assesses what the current research says about this question.
• The methodology, results and discussion chapters go about undertaking new research about this question.
• The conclusion chapter (attempts to) answer the core research question .

In other words, the dissertation structure and layout reflect the research process of asking a well-defined question(s), investigating, and then answering the question – see below.

To restate that – the structure and layout of a dissertation reflect the flow of the overall research process . This is essential to understand, as each chapter will make a lot more sense if you “get” this concept. If you’re not familiar with the research process, read this post before going further.

Right. Now that we’ve covered the big picture, let’s dive a little deeper into the details of each section and chapter. Oh and by the way, you can also grab our free dissertation/thesis template here to help speed things up.

The title page of your dissertation is the very first impression the marker will get of your work, so it pays to invest some time thinking about your title. But what makes for a good title? A strong title needs to be 3 things:

• Succinct (not overly lengthy or verbose)
• Specific (not vague or ambiguous)
• Representative of the research you’re undertaking (clearly linked to your research questions)

Typically, a good title includes mention of the following:

• The broader area of the research (i.e. the overarching topic)
• The specific focus of your research (i.e. your specific context)
• Indication of research design (e.g. quantitative , qualitative , or  mixed methods ).

For example:

A quantitative investigation [research design] into the antecedents of organisational trust [broader area] in the UK retail forex trading market [specific context/area of focus].

Again, some universities may have specific requirements regarding the format and structure of the title, so it’s worth double-checking expectations with your institution (if there’s no mention in the brief or study material).

Acknowledgements

This page provides you with an opportunity to say thank you to those who helped you along your research journey. Generally, it’s optional (and won’t count towards your marks), but it is academic best practice to include this.

So, who do you say thanks to? Well, there’s no prescribed requirements, but it’s common to mention the following people:

• Your dissertation supervisor or committee.
• Any professors, lecturers or academics that helped you understand the topic or methodologies.
• Any tutors, mentors or advisors.
• Your family and friends, especially spouse (for adult learners studying part-time).

There’s no need for lengthy rambling. Just state who you’re thankful to and for what (e.g. thank you to my supervisor, John Doe, for his endless patience and attentiveness) – be sincere. In terms of length, you should keep this to a page or less.

Abstract or executive summary

The dissertation abstract (or executive summary for some degrees) serves to provide the first-time reader (and marker or moderator) with a big-picture view of your research project. It should give them an understanding of the key insights and findings from the research, without them needing to read the rest of the report – in other words, it should be able to stand alone .

For it to stand alone, your abstract should cover the following key points (at a minimum):

• Your research questions and aims – what key question(s) did your research aim to answer?
• Your methodology – how did you go about investigating the topic and finding answers to your research question(s)?
• Your findings – following your own research, what did do you discover?
• Your conclusions – based on your findings, what conclusions did you draw? What answers did you find to your research question(s)?

So, in much the same way the dissertation structure mimics the research process, your abstract or executive summary should reflect the research process, from the initial stage of asking the original question to the final stage of answering that question.

In practical terms, it’s a good idea to write this section up last , once all your core chapters are complete. Otherwise, you’ll end up writing and rewriting this section multiple times (just wasting time). For a step by step guide on how to write a strong executive summary, check out this post .

Need a helping hand?

Table of contents

This section is straightforward. You’ll typically present your table of contents (TOC) first, followed by the two lists – figures and tables. I recommend that you use Microsoft Word’s automatic table of contents generator to generate your TOC. If you’re not familiar with this functionality, the video below explains it simply:

If you find that your table of contents is overly lengthy, consider removing one level of depth. Oftentimes, this can be done without detracting from the usefulness of the TOC.

Right, now that the “admin” sections are out of the way, its time to move on to your core chapters. These chapters are the heart of your dissertation and are where you’ll earn the marks. The first chapter is the introduction chapter – as you would expect, this is the time to introduce your research…

It’s important to understand that even though you’ve provided an overview of your research in your abstract, your introduction needs to be written as if the reader has not read that (remember, the abstract is essentially a standalone document). So, your introduction chapter needs to start from the very beginning, and should address the following questions:

• What will you be investigating (in plain-language, big picture-level)?
• Why is that worth investigating? How is it important to academia or business? How is it sufficiently original?
• What are your research aims and research question(s)? Note that the research questions can sometimes be presented at the end of the literature review (next chapter).
• What is the scope of your study? In other words, what will and won’t you cover ?
• How will you approach your research? In other words, what methodology will you adopt?
• How will you structure your dissertation? What are the core chapters and what will you do in each of them?

These are just the bare basic requirements for your intro chapter. Some universities will want additional bells and whistles in the intro chapter, so be sure to carefully read your brief or consult your research supervisor.

If done right, your introduction chapter will set a clear direction for the rest of your dissertation. Specifically, it will make it clear to the reader (and marker) exactly what you’ll be investigating, why that’s important, and how you’ll be going about the investigation. Conversely, if your introduction chapter leaves a first-time reader wondering what exactly you’ll be researching, you’ve still got some work to do.

Now that you’ve set a clear direction with your introduction chapter, the next step is the literature review . In this section, you will analyse the existing research (typically academic journal articles and high-quality industry publications), with a view to understanding the following questions:

• What does the literature currently say about the topic you’re investigating?
• Is the literature lacking or well established? Is it divided or in disagreement?
• How does your research fit into the bigger picture?
• How does your research contribute something original?
• How does the methodology of previous studies help you develop your own?

Depending on the nature of your study, you may also present a conceptual framework towards the end of your literature review, which you will then test in your actual research.

Again, some universities will want you to focus on some of these areas more than others, some will have additional or fewer requirements, and so on. Therefore, as always, its important to review your brief and/or discuss with your supervisor, so that you know exactly what’s expected of your literature review chapter.

Now that you’ve investigated the current state of knowledge in your literature review chapter and are familiar with the existing key theories, models and frameworks, its time to design your own research. Enter the methodology chapter – the most “science-ey” of the chapters…

In this chapter, you need to address two critical questions:

• Exactly HOW will you carry out your research (i.e. what is your intended research design)?
• Exactly WHY have you chosen to do things this way (i.e. how do you justify your design)?

Remember, the dissertation part of your degree is first and foremost about developing and demonstrating research skills . Therefore, the markers want to see that you know which methods to use, can clearly articulate why you’ve chosen then, and know how to deploy them effectively.

Importantly, this chapter requires detail – don’t hold back on the specifics. State exactly what you’ll be doing, with who, when, for how long, etc. Moreover, for every design choice you make, make sure you justify it.

In practice, you will likely end up coming back to this chapter once you’ve undertaken all your data collection and analysis, and revise it based on changes you made during the analysis phase. This is perfectly fine. Its natural for you to add an additional analysis technique, scrap an old one, etc based on where your data lead you. Of course, I’m talking about small changes here – not a fundamental switch from qualitative to quantitative, which will likely send your supervisor in a spin!

You’ve now collected your data and undertaken your analysis, whether qualitative, quantitative or mixed methods. In this chapter, you’ll present the raw results of your analysis . For example, in the case of a quant study, you’ll present the demographic data, descriptive statistics, inferential statistics , etc.

Typically, Chapter 4 is simply a presentation and description of the data, not a discussion of the meaning of the data. In other words, it’s descriptive, rather than analytical – the meaning is discussed in Chapter 5. However, some universities will want you to combine chapters 4 and 5, so that you both present and interpret the meaning of the data at the same time. Check with your institution what their preference is.

Now that you’ve presented the data analysis results, its time to interpret and analyse them. In other words, its time to discuss what they mean, especially in relation to your research question(s).

What you discuss here will depend largely on your chosen methodology. For example, if you’ve gone the quantitative route, you might discuss the relationships between variables . If you’ve gone the qualitative route, you might discuss key themes and the meanings thereof. It all depends on what your research design choices were.

Most importantly, you need to discuss your results in relation to your research questions and aims, as well as the existing literature. What do the results tell you about your research questions? Are they aligned with the existing research or at odds? If so, why might this be? Dig deep into your findings and explain what the findings suggest, in plain English.

The final chapter – you’ve made it! Now that you’ve discussed your interpretation of the results, its time to bring it back to the beginning with the conclusion chapter . In other words, its time to (attempt to) answer your original research question s (from way back in chapter 1). Clearly state what your conclusions are in terms of your research questions. This might feel a bit repetitive, as you would have touched on this in the previous chapter, but its important to bring the discussion full circle and explicitly state your answer(s) to the research question(s).

Next, you’ll typically discuss the implications of your findings? In other words, you’ve answered your research questions – but what does this mean for the real world (or even for academia)? What should now be done differently, given the new insight you’ve generated?

Lastly, you should discuss the limitations of your research, as well as what this means for future research in the area. No study is perfect, especially not a Masters-level. Discuss the shortcomings of your research. Perhaps your methodology was limited, perhaps your sample size was small or not representative, etc, etc. Don’t be afraid to critique your work – the markers want to see that you can identify the limitations of your work. This is a strength, not a weakness. Be brutal!

This marks the end of your core chapters – woohoo! From here on out, it’s pretty smooth sailing.

The reference list is straightforward. It should contain a list of all resources cited in your dissertation, in the required format, e.g. APA , Harvard, etc.

It’s essential that you use reference management software for your dissertation. Do NOT try handle your referencing manually – its far too error prone. On a reference list of multiple pages, you’re going to make mistake. To this end, I suggest considering either Mendeley or Zotero. Both are free and provide a very straightforward interface to ensure that your referencing is 100% on point. I’ve included a simple how-to video for the Mendeley software (my personal favourite) below:

Some universities may ask you to include a bibliography, as opposed to a reference list. These two things are not the same . A bibliography is similar to a reference list, except that it also includes resources which informed your thinking but were not directly cited in your dissertation. So, double-check your brief and make sure you use the right one.

The very last piece of the puzzle is the appendix or set of appendices. This is where you’ll include any supporting data and evidence. Importantly, supporting is the keyword here.

Your appendices should provide additional “nice to know”, depth-adding information, which is not critical to the core analysis. Appendices should not be used as a way to cut down word count (see this post which covers how to reduce word count ). In other words, don’t place content that is critical to the core analysis here, just to save word count. You will not earn marks on any content in the appendices, so don’t try to play the system!

Time to recap…

And there you have it – the traditional dissertation structure and layout, from A-Z. To recap, the core structure for a dissertation or thesis is (typically) as follows:

• Acknowledgments page

Most importantly, the core chapters should reflect the research process (asking, investigating and answering your research question). Moreover, the research question(s) should form the golden thread throughout your dissertation structure. Everything should revolve around the research questions, and as you’ve seen, they should form both the start point (i.e. introduction chapter) and the endpoint (i.e. conclusion chapter).

I hope this post has provided you with clarity about the traditional dissertation/thesis structure and layout. If you have any questions or comments, please leave a comment below, or feel free to get in touch with us. Also, be sure to check out the rest of the  Grad Coach Blog .

Psst... there’s more!

This post was based on one of our popular Research Bootcamps . If you're working on a research project, you'll definitely want to check this out ...

You Might Also Like:

36 Comments

many thanks i found it very useful

Glad to hear that, Arun. Good luck writing your dissertation.

Such clear practical logical advice. I very much needed to read this to keep me focused in stead of fretting.. Perfect now ready to start my research!

what about scientific fields like computer or engineering thesis what is the difference in the structure? thank you very much

Thanks so much this helped me a lot!

Very helpful and accessible. What I like most is how practical the advice is along with helpful tools/ links.

Thanks Ade!

Thank you so much sir.. It was really helpful..

You’re welcome!

Hi! How many words maximum should contain the abstract?

Thank you so much 😊 Find this at the right moment

You’re most welcome. Good luck with your dissertation.

best ever benefit i got on right time thank you

Many times Clarity and vision of destination of dissertation is what makes the difference between good ,average and great researchers the same way a great automobile driver is fast with clarity of address and Clear weather conditions .

I guess Great researcher = great ideas + knowledge + great and fast data collection and modeling + great writing + high clarity on all these

You have given immense clarity from start to end.

Morning. Where will I write the definitions of what I’m referring to in my report?

Thank you so much Derek, I was almost lost! Thanks a tonnnn! Have a great day!

Thanks ! so concise and valuable

This was very helpful. Clear and concise. I know exactly what to do now.

Thank you for allowing me to go through briefly. I hope to find time to continue.

Really useful to me. Thanks a thousand times

Very interesting! It will definitely set me and many more for success. highly recommended.

Thank you soo much sir, for the opportunity to express my skills

Usefull, thanks a lot. Really clear

Very nice and easy to understand. Thank you .

That was incredibly useful. Thanks Grad Coach Crew!

My stress level just dropped at least 15 points after watching this. Just starting my thesis for my grad program and I feel a lot more capable now! Thanks for such a clear and helpful video, Emma and the GradCoach team!

Do we need to mention the number of words the dissertation contains in the main document?

It depends on your university’s requirements, so it would be best to check with them 🙂

Such a helpful post to help me get started with structuring my masters dissertation, thank you!

Great video; I appreciate that helpful information

It is so necessary or avital course

This blog is very informative for my research. Thank you

Doctoral students are required to fill out the National Research Council’s Survey of Earned Doctorates

wow this is an amazing gain in my life

This is so good

How can i arrange my specific objectives in my dissertation?

Trackbacks/Pingbacks

• What Is A Literature Review (In A Dissertation Or Thesis) - Grad Coach - […] is to write the actual literature review chapter (this is usually the second chapter in a typical dissertation or…

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

How to write an undergraduate university dissertation

Writing a dissertation is a daunting task, but these tips will help you prepare for all the common challenges students face before deadline day.

Grace McCabe

Writing a dissertation is one of the most challenging aspects of university. However, it is the chance for students to demonstrate what they have learned during their degree and to explore a topic in depth.

In this article, we look at 10 top tips for writing a successful dissertation and break down how to write each section of a dissertation in detail.

10 tips for writing an undergraduate dissertation

1. Select an engaging topic Choose a subject that aligns with your interests and allows you to showcase the skills and knowledge you have acquired through your degree.

2. Research your supervisor Undergraduate students will often be assigned a supervisor based on their research specialisms. Do some research on your supervisor and make sure that they align with your dissertation goals.

3. Understand the dissertation structure Familiarise yourself with the structure (introduction, review of existing research, methodology, findings, results and conclusion). This will vary based on your subject.

4. Write a schedule As soon as you have finalised your topic and looked over the deadline, create a rough plan of how much work you have to do and create mini-deadlines along the way to make sure don’t find yourself having to write your entire dissertation in the final few weeks.

5. Determine requirements Ensure that you know which format your dissertation should be presented in. Check the word count and the referencing style.

6. Organise references from the beginning Maintain an alphabetically arranged reference list or bibliography in the designated style as you do your reading. This will make it a lot easier to finalise your references at the end.

7. Create a detailed plan Once you have done your initial research and have an idea of the shape your dissertation will take, write a detailed essay plan outlining your research questions, SMART objectives and dissertation structure.

8. Keep a dissertation journal Track your progress, record your research and your reading, and document challenges. This will be helpful as you discuss your work with your supervisor and organise your notes.

9. Schedule regular check-ins with your supervisor Make sure you stay in touch with your supervisor throughout the process, scheduling regular meetings and keeping good notes so you can update them on your progress.

10. Employ effective proofreading techniques Ask friends and family to help you proofread your work or use different fonts to help make the text look different. This will help you check for missing sections, grammatical mistakes and typos.

What is a dissertation?

A dissertation is a long piece of academic writing or a research project that you have to write as part of your undergraduate university degree.

It’s usually a long essay in which you explore your chosen topic, present your ideas and show that you understand and can apply what you’ve learned during your studies. Informally, the terms “dissertation” and “thesis” are often used interchangeably.

How do I select a dissertation topic?

First, choose a topic that you find interesting. You will be working on your dissertation for several months, so finding a research topic that you are passionate about and that demonstrates your strength in your subject is best. You want your topic to show all the skills you have developed during your degree. It would be a bonus if you can link your work to your chosen career path, but it’s not necessary.

Second, begin by exploring relevant literature in your field, including academic journals, books and articles. This will help you identify gaps in existing knowledge and areas that may need further exploration. You may not be able to think of a truly original piece of research, but it’s always good to know what has already been written about your chosen topic.

Consider the practical aspects of your chosen topic, ensuring that it is possible within the time frame and available resources. Assess the availability of data, research materials and the overall practicality of conducting the research.

When picking a dissertation topic, you also want to try to choose something that adds new ideas or perspectives to what’s already known in your field. As you narrow your focus, remember that a more targeted approach usually leads to a dissertation that’s easier to manage and has a bigger impact. Be ready to change your plans based on feedback and new information you discover during your research.

How to work with your dissertation supervisor?

Your supervisor is there to provide guidance on your chosen topic, direct your research efforts, and offer assistance and suggestions when you have queries. It’s crucial to establish a comfortable and open line of communication with them throughout the process. Their knowledge can greatly benefit your work. Keep them informed about your progress, seek their advice, and don’t hesitate to ask questions.

1. Keep them updated Regularly tell your supervisor how your work is going and if you’re having any problems. You can do this through emails, meetings or progress reports.

2. Plan meetings Schedule regular meetings with your supervisor. These can be in person or online. These are your time to discuss your progress and ask for help.

3. Share your writing Give your supervisor parts of your writing or an outline. This helps them see what you’re thinking so they can advise you on how to develop it.

5. Ask specific questions When you need help, ask specific questions instead of general ones. This makes it easier for your supervisor to help you.

6. Listen to feedback Be open to what your supervisor says. If they suggest changes, try to make them. It makes your dissertation better and shows you can work together.

7. Talk about problems If something is hard or you’re worried, talk to your supervisor about it. They can give you advice or tell you where to find help.

8. Take charge Be responsible for your work. Let your supervisor know if your plans change, and don’t wait if you need help urgently.

Remember, talking openly with your supervisor helps you both understand each other better, improves your dissertation and ensures that you get the support you need.

How to write a successful research piece at university How to choose a topic for your dissertation Tips for writing a convincing thesis

How do I plan my dissertation?

It’s important to start with a detailed plan that will serve as your road map throughout the entire process of writing your dissertation. As Jumana Labib, a master’s student at the University of Manchester  studying digital media, culture and society, suggests: “Pace yourself – definitely don’t leave the entire thing for the last few days or weeks.”

Decide what your research question or questions will be for your chosen topic.

Break that down into smaller SMART (specific, measurable, achievable, relevant and time-bound) objectives.

Speak to your supervisor about any overlooked areas.

Create a breakdown of chapters using the structure listed below (for example, a methodology chapter).

Define objectives, key points and evidence for each chapter.

Define your research approach (qualitative, quantitative or mixed methods).

Outline your research methods and analysis techniques.

Develop a timeline with regular moments for review and feedback.

Allocate time for revision, editing and breaks.

Consider any ethical considerations related to your research.

Stay organised and add to your references and bibliography throughout the process.

Remain flexible to possible reviews or changes as you go along.

A well thought-out plan not only makes the writing process more manageable but also increases the likelihood of producing a high-quality piece of research.

How to structure a dissertation?

The structure can depend on your field of study, but this is a rough outline for science and social science dissertations:

Introduce your topic.

Complete a source or literature review.

Describe your research methodology (including the methods for gathering and filtering information, analysis techniques, materials, tools or resources used, limitations of your method, and any considerations of reliability).

Summarise your findings.

Discuss the results and what they mean.

Conclude your point and explain how your work contributes to your field.

On the other hand, humanities and arts dissertations often take the form of an extended essay. This involves constructing an argument or exploring a particular theory or analysis through the analysis of primary and secondary sources. Your essay will be structured through chapters arranged around themes or case studies.

All dissertations include a title page, an abstract and a reference list. Some may also need a table of contents at the beginning. Always check with your university department for its dissertation guidelines, and check with your supervisor as you begin to plan your structure to ensure that you have the right layout.

How long is an undergraduate dissertation?

The length of an undergraduate dissertation can vary depending on the specific guidelines provided by your university and your subject department. However, in many cases, undergraduate dissertations are typically about 8,000 to 12,000 words in length.

“Eat away at it; try to write for at least 30 minutes every day, even if it feels relatively unproductive to you in the moment,” Jumana advises.

How do I add references to my dissertation?

References are the section of your dissertation where you acknowledge the sources you have quoted or referred to in your writing. It’s a way of supporting your ideas, evidencing what research you have used and avoiding plagiarism (claiming someone else’s work as your own), and giving credit to the original authors.

Referencing typically includes in-text citations and a reference list or bibliography with full source details. Different referencing styles exist, such as Harvard, APA and MLA, each favoured in specific fields. Your university will tell you the preferred style.

Using tools and guides provided by universities can make the referencing process more manageable, but be sure they are approved by your university before using any.

How do I write a bibliography or list my references for my dissertation?

The requirement of a bibliography depends on the style of referencing you need to use. Styles such as OSCOLA or Chicago may not require a separate bibliography. In these styles, full source information is often incorporated into footnotes throughout the piece, doing away with the need for a separate bibliography section.

Typically, reference lists or bibliographies are organised alphabetically based on the author’s last name. They usually include essential details about each source, providing a quick overview for readers who want more information. Some styles ask that you include references that you didn’t use in your final piece as they were still a part of the overall research.

It is important to maintain this list as soon as you start your research. As you complete your research, you can add more sources to your bibliography to ensure that you have a comprehensive list throughout the dissertation process.

How to proofread an undergraduate dissertation?

Throughout your dissertation writing, attention to detail will be your greatest asset. The best way to avoid making mistakes is to continuously proofread and edit your work.

Proofreading is a great way to catch any missing sections, grammatical errors or typos. There are many tips to help you proofread:

Ask someone to read your piece and highlight any mistakes they find.

Change the font so you notice any mistakes.

Format your piece as you go, headings and sections will make it easier to spot any problems.

Separate editing and proofreading. Editing is your chance to rewrite sections, add more detail or change any points. Proofreading should be where you get into the final touches, really polish what you have and make sure it’s ready to be submitted.

Stick to your citation style and make sure every resource listed in your dissertation is cited in the reference list or bibliography.

How to write a conclusion for my dissertation?

Writing a dissertation conclusion is your chance to leave the reader impressed by your work.

Start by summarising your findings, highlighting your key points and the outcome of your research. Refer back to the original research question or hypotheses to provide context to your conclusion.

You can then delve into whether you achieved the goals you set at the beginning and reflect on whether your research addressed the topic as expected. Make sure you link your findings to existing literature or sources you have included throughout your work and how your own research could contribute to your field.

Be honest about any limitations or issues you faced during your research and consider any questions that went unanswered that you would consider in the future. Make sure that your conclusion is clear and concise, and sum up the overall impact and importance of your work.

Remember, keep the tone confident and authoritative, avoiding the introduction of new information. This should simply be a summary of everything you have already said throughout the dissertation.

You may also like

.css-185owts{overflow:hidden;max-height:54px;text-indent:0px;} How to use digital advisers to improve academic writing

How to deal with exam stress

Seeta Bhardwa

5 revision techniques to help you ace exam season (plus 7 more unusual approaches)

Register free and enjoy extra benefits

• How it works

How to Structure a Dissertation – A Step by Step Guide

Published by Owen Ingram at August 11th, 2021 , Revised On September 20, 2023

A dissertation – sometimes called a thesis –  is a long piece of information backed up by extensive research. This one, huge piece of research is what matters the most when students – undergraduates and postgraduates – are in their final year of study.

On the other hand, some institutions, especially in the case of undergraduate students, may or may not require students to write a dissertation. Courses are offered instead. This generally depends on the requirements of that particular institution.

If you are unsure about how to structure your dissertation or thesis, this article will offer you some guidelines to work out what the most important segments of a dissertation paper are and how you should organise them. Why is structure so important in research, anyway?

One way to answer that, as Abbie Hoffman aptly put it, is because: “Structure is more important than content in the transmission of information.”

Also Read:   How to write a dissertation – step by step guide .

How to Structure a Dissertation or Thesis

It should be noted that the exact structure of your dissertation will depend on several factors, such as:

• Your research approach (qualitative/quantitative)
• The nature of your research design (exploratory/descriptive etc.)
• The requirements set for forth by your academic institution.
• The discipline or field your study belongs to. For instance, if you are a humanities student, you will need to develop your dissertation on the same pattern as any long essay .

This will include developing an overall argument to support the thesis statement and organizing chapters around theories or questions. The dissertation will be structured such that it starts with an introduction , develops on the main idea in its main body paragraphs and is then summarised in conclusion .

However, if you are basing your dissertation on primary or empirical research, you will be required to include each of the below components. In most cases of dissertation writing, each of these elements will have to be written as a separate chapter.

But depending on the word count you are provided with and academic subject, you may choose to combine some of these elements.

For example, sciences and engineering students often present results and discussions together in one chapter rather than two different chapters.

If you have any doubts about structuring your dissertation or thesis, it would be a good idea to consult with your academic supervisor and check your department’s requirements.

Parts of  a Dissertation or Thesis

Your dissertation will  start with a t itle page that will contain details of the author/researcher, research topic, degree program (the paper is to be submitted for), and research supervisor. In other words, a title page is the opening page containing all the names and title related to your research.

The name of your university, logo, student ID and submission date can also be presented on the title page. Many academic programs have stringent rules for formatting the dissertation title page.

Acknowledgements

The acknowledgments section allows you to thank those who helped you with your dissertation project. You might want to mention the names of your academic supervisor, family members, friends, God, and participants of your study whose contribution and support enabled you to complete your work.

However, the acknowledgments section is usually optional.

Tip: Many students wrongly assume that they need to thank everyone…even those who had little to no contributions towards the dissertation. This is not the case. You only need to thank those who were directly involved in the research process, such as your participants/volunteers, supervisor(s) etc.

Perhaps the smallest yet important part of a thesis, an abstract contains 5 parts:

• A brief introduction of your research topic.
• The significance of your research.
•  A line or two about the methodology that was used.
• The results and what they mean (briefly); their interpretation(s).
• And lastly, a conclusive comment regarding the results’ interpretation(s) as conclusion .

Stuck on a difficult dissertation? We can help!

Our Essay Writing Service Features:

• Expert UK Writers
• Plagiarism-free
• Timely Delivery
• Thorough Research
• Rigorous Quality Control

“ Our expert dissertation writers can help you with all stages of the dissertation writing process including topic research and selection, dissertation plan, dissertation proposal , methodology , statistical analysis , primary and secondary research, findings and analysis and complete dissertation writing. “

Tip: Make sure to highlight key points to help readers figure out the scope and findings of your research study without having to read the entire dissertation. The abstract is your first chance to impress your readers. So, make sure to get it right. Here are detailed guidelines on how to write abstract for dissertation .

Table of Contents

Table of contents is the section of a dissertation that guides each section of the dissertation paper’s contents. Depending on the level of detail in a table of contents, the most useful headings are listed to provide the reader the page number on which said information may be found at.

Table of contents can be inserted automatically as well as manually using the Microsoft Word Table of Contents feature.

List of Figures and Tables

If your dissertation paper uses several illustrations, tables and figures, you might want to present them in a numbered list in a separate section . Again, this list of tables and figures can be auto-created and auto inserted using the Microsoft Word built-in feature.

List of Abbreviations

Dissertations that include several abbreviations can also have an independent and separate alphabetised  list of abbreviations so readers can easily figure out their meanings.

If you think you have used terms and phrases in your dissertation that readers might not be familiar with, you can create a  glossary  that lists important phrases and terms with their meanings explained.

Looking for dissertation help?

Researchprospect to the rescue then.

We have expert writers on our team who are skilled at helping students with quantitative dissertations across a variety of STEM disciplines. Guaranteeing 100% satisfaction!

Introduction

Introduction chapter  briefly introduces the purpose and relevance of your research topic.

Here, you will be expected to list the aim and key objectives of your research so your readers can easily understand what the following chapters of the dissertation will cover. A good dissertation introduction section incorporates the following information:

• It provides background information to give context to your research.
• It clearly specifies the research problem you wish to address with your research. When creating research questions , it is important to make sure your research’s focus and scope are neither too broad nor too narrow.
• it demonstrates how your research is relevant and how it would contribute to the existing knowledge.
• It provides an overview of the structure of your dissertation. The last section of an introduction contains an outline of the following chapters. It could start off with something like: “In the following chapter, past literature has been reviewed and critiqued. The proceeding section lays down major research findings…”
• Theoretical framework – under a separate sub-heading – is also provided within the introductory chapter. Theoretical framework deals with the basic, underlying theory or theories that the research revolves around.

All the information presented under this section should be relevant, clear, and engaging. The readers should be able to figure out the what, why, when, and how of your study once they have read the introduction. Here are comprehensive guidelines on how to structure the introduction to the dissertation .

“Overwhelmed by tight deadlines and tons of assignments to write? There is no need to panic! Our expert academics can help you with every aspect of your dissertation – from topic creation and research problem identification to choosing the methodological approach and data analysis.”

Literature Review 

The  literature review chapter  presents previous research performed on the topic and improves your understanding of the existing literature on your chosen topic. This is usually organised to complement your  primary research  work completed at a later stage.

Make sure that your chosen academic sources are authentic and up-to-date. The literature review chapter must be comprehensive and address the aims and objectives as defined in the introduction chapter. Here is what your literature research chapter should aim to achieve:

• Data collection from authentic and relevant academic sources such as books, journal articles and research papers.
• Analytical assessment of the information collected from those sources; this would involve a critiquing the reviewed researches that is, what their strengths/weaknesses are, why the research method they employed is better than others, importance of their findings, etc.
• Identifying key research gaps, conflicts, patterns, and theories to get your point across to the reader effectively.

While your literature review should summarise previous literature, it is equally important to make sure that you develop a comprehensible argument or structure to justify your research topic. It would help if you considered keeping the following questions in mind when writing the literature review:

• How does your research work fill a certain gap in exiting literature?
• Did you adopt/adapt a new research approach to investigate the topic?
• Does your research solve an unresolved problem?
• Is your research dealing with some groundbreaking topic or theory that others might have overlooked?
• Is your research taking forward an existing theoretical discussion?
• Does your research strengthen and build on current knowledge within your area of study? This is otherwise known as ‘adding to the existing body of knowledge’ in academic circles.

Tip: You might want to establish relationships between variables/concepts to provide descriptive answers to some or all of your research questions. For instance, in case of quantitative research, you might hypothesise that variable A is positively co-related to variable B that is, one increases and so does the other one.

Research Methodology

The methods and techniques ( secondary and/or primar y) employed to collect research data are discussed in detail in the  Methodology chapter. The most commonly used primary data collection methods are:

• questionnaires
• focus groups
• observations

Essentially, the methodology chapter allows the researcher to explain how he/she achieved the findings, why they are reliable and how they helped him/her test the research hypotheses or address the research problem.

You might want to consider the following when writing methodology for the dissertation:

• Type of research and approach your work is based on. Some of the most widely used types of research include experimental, quantitative and qualitative methodologies.
• Data collection techniques that were employed such as questionnaires, surveys, focus groups, observations etc.
• Details of how, when, where, and what of the research that was conducted.
• Data analysis strategies employed (for instance, regression analysis).
• Software and tools used for data analysis (Excel, STATA, SPSS, lab equipment, etc.).
• Research limitations to highlight any hurdles you had to overcome when carrying our research. Limitations might or might not be mentioned within research methodology. Some institutions’ guidelines dictate they be mentioned under a separate section alongside recommendations.
• Justification of your selection of research approach and research methodology.

Here is a comprehensive article on  how to structure a dissertation methodology .

Research Findings

In this section, you present your research findings. The dissertation findings chapter  is built around the research questions, as outlined in the introduction chapter. Report findings that are directly relevant to your research questions.

Any information that is not directly relevant to research questions or hypotheses but could be useful for the readers can be placed under the  Appendices .

As indicated above, you can either develop a  standalone chapter  to present your findings or combine them with the discussion chapter. This choice depends on  the type of research involved and the academic subject, as well as what your institution’s academic guidelines dictate.

For example, it is common to have both findings and discussion grouped under the same section, particularly if the dissertation is based on qualitative research data.

On the other hand, dissertations that use quantitative or experimental data should present findings and analysis/discussion in two separate chapters. Here are some sample dissertations to help you figure out the best structure for your own project.

Sample Dissertation

Tip: Try to present as many charts, graphs, illustrations and tables in the findings chapter to improve your data presentation. Provide their qualitative interpretations alongside, too. Refrain from explaining the information that is already evident from figures and tables.

The findings are followed by the  Discussion chapter , which is considered the heart of any dissertation paper. The discussion section is an opportunity for you to tie the knots together to address the research questions and present arguments, models and key themes.

This chapter can make or break your research.

The discussion chapter does not require any new data or information because it is more about the interpretation(s) of the data you have already collected and presented. Here are some questions for you to think over when writing the discussion chapter:

• Did your work answer all the research questions or tested the hypothesis?
• Did you come up with some unexpected results for which you have to provide an additional explanation or justification?
• Are there any limitations that could have influenced your research findings?

Here is an article on how to  structure a dissertation discussion .

Conclusions corresponding to each research objective are provided in the  Conclusion section . This is usually done by revisiting the research questions to finally close the dissertation. Some institutions may specifically ask for recommendations to evaluate your critical thinking.

By the end, the readers should have a clear apprehension of your fundamental case with a focus on  what methods of research were employed  and what you achieved from this research.

Quick Question: Does the conclusion chapter reflect on the contributions your research work will make to existing knowledge?

Answer: Yes, the conclusion chapter of the research paper typically includes a reflection on the research’s contributions to existing knowledge.  In the “conclusion chapter”, you have to summarise the key findings and discuss how they add value to the existing literature on the current topic.

Reference list

All academic sources that you collected information from should be cited in-text and also presented in a  reference list (or a bibliography in case you include references that you read for the research but didn’t end up citing in the text), so the readers can easily locate the source of information when/if needed.

At most UK universities, Harvard referencing is the recommended style of referencing. It has strict and specific requirements on how to format a reference resource. Other common styles of referencing include MLA, APA, Footnotes, etc.

Each chapter of the dissertation should have relevant information. Any information that is not directly relevant to your research topic but your readers might be interested in (interview transcripts etc.) should be moved under the Appendices section .

Things like questionnaires, survey items or readings that were used in the study’s experiment are mostly included under appendices.

An Outline of Dissertation/Thesis Structure

How can We Help you with your Dissertation?

If you are still unsure about how to structure a dissertation or thesis, or simply lack the motivation to kick start your dissertation project, you might be interested in our dissertation services .

If you are still unsure about how to structure a dissertation or thesis, or lack the motivation to kick start your dissertation project, you might be interested in our dissertation services.

Whether you need help with individual chapters, proposals or the full dissertation paper, we have PhD-qualified writers who will write your paper to the highest academic standard. ResearchProspect is UK-based, and a UK-registered business, which means the UK consumer law protects all our clients.

All You Need to Know About Us Learn More About Our Dissertation Services

FAQs About Structure a Dissertation

What does the title page of a dissertation contain.

The title page will contain details of the author/researcher, research topic , degree program (the paper is to be submitted for) and research supervisor’s name(s). The name of your university, logo, student number and submission date can also be presented on the title page.

What is the purpose of adding acknowledgement?

The acknowledgements section allows you to thank those who helped you with your dissertation project. You might want to mention the names of your academic supervisor, family members, friends, God and participants of your study whose contribution and support enabled you to complete your work.

Can I omit the glossary from the dissertation?

Yes, but only if you think that your paper does not contain any terms or phrases that the reader might not understand. If you think you have used them in the paper,  you must create a glossary that lists important phrases and terms with their meanings explained.

What is the purpose of appendices in a dissertation?

Any information that is not directly relevant to research questions or hypotheses but could be useful for the readers can be placed under the Appendices, such as questionnaire that was used in the study.

Which referencing style should I use in my dissertation?

You can use any of the referencing styles such as APA, MLA, and Harvard, according to the recommendation of your university; however, almost all UK institutions prefer Harvard referencing style .

What is the difference between references and bibliography?

References contain all the works that you read up and used and therefore, cited within the text of your thesis. However, in case you read on some works and resources that you didn’t end up citing in-text, they will be referenced in what is called a bibliography.

Additional readings might also be present alongside each bibliography entry for readers.

You May Also Like

Dissertation conclusion is perhaps the most underrated part of a dissertation or thesis paper. Learn how to write a dissertation conclusion.

Dissertation discussion is where you explore the relevance and significance of results. Here are guidelines to help you write the perfect discussion chapter.

Appendices or Appendixes are used to provide additional date related to your dissertation research project. Here we explain what is appendix in dissertation

USEFUL LINKS

LEARNING RESOURCES

COMPANY DETAILS

• How It Works

404 Not found

Library Guides

Dissertations 1: getting started: devising an approach/method.

• Starting Your Dissertation
• Choosing A Topic and Researching
• Devising An Approach/Method
• Thinking Of A Title
• Writing A Proposal

Formulating a Research Question or Hypothesis (Dissertations)

Research is about finding answers to questions (sometimes expressed in terms of hypotheses). It is also important to frame your research question or hypothesis as this will narrow down a broad topic of interest to a specific area of study.  

To frame your research question / hypothesis, you should take the following steps: 

Start with a broad topic that you are interested in. Use mind mapping techniques to group ideas together, organise and connect them.  

Look up current debates and topical issues to identify gaps in knowledge.  

Try coming up with potential research questions by narrowing down your topic. You can develop these questions by either challenging the view of others or attempting to fill the gaps in knowledge you have identified so far. 

Check the strength of your potential research questions / hypotheses (see below for more information).  

Hulley et al (2007) suggests using the FINER criteria to determine the strength of your research question / hypothesis.  

Ask yourself if your questions are: 

F – Feasible  Can the study be completed with the timeframe given and the resources which are available? 

I – Interesting  Is your research question / hypothesis of interest to the wider academic community? 

N – Novel  Does your research question / hypothesis promise to offer new insight into your field of study? 

E – Ethical  If you are gathering original data, would your research question / hypothesis be approved by panels and review boards? 

R – Relevant  Is your research question / hypothesis relevant to public interest or the debates currently circulating within the wider academic community? 

Research Question or Hypothesis?

Normally, in a dissertation you will have a research question OR a hypothesis.  

When to use research questions or hypotheses? 

If you use mixed methods (qualitative and quantitative) research you may need to have both hypothesis (for the quantitative part) and research question (for the qualitative part). See also the Methodology Guide .

Formulating a Research Question

We advise you to formulate a research question if  

Your project is exploratory, meaning you are not looking for a specific result.  

Your project method is qualitative, seeking to understand concepts, thoughts and experiences through non-numerical data.  

Characteristics of good research questions: 

Feasible : you must be able to answer it within your means (skills, time, financial means). It is better to have a thoroughly researched answer to a small question than to fail to find the answer to one which is too big or diffuse! 

Focused : deal with a single problem or issue that you can answer thoroughly. We recommend the use of one, maximum two, research question(s). 

Complex : find a topic that can be addresses in the space of your dissertation. No short yes or no answers! 

Relevant : find something relating to your course, and ideally helpful to society as well. 

Original : try to fill a gap in the knowledge. 

• Developing strong research questions Further tips on how to develop strong research questions.
• Research question examples Examples of poor research questions, and of how to rewrite them to be stronger.

Formulating a Hypothesis

A hypothesis is a reasoned, provisional statement capable of being empirically tested. As a statement, it predicts what you think the outcome of the study will be. A hypothesis is generally associated with quantitative studies (studies based on numerical data).  

Characteristics of good hypotheses: 

Testable : the hypothesis has to be capable of being proved or disproved by testing. 

Informed : make sure you take into consideration existing knowledge and experiments.  

Simple : try to make your hypothesis as simple as possible. Usually, it will be a hypothesis that shows the relationship between two variables where one is called the independent variable or ‘cause’ and the other is the dependent variable or ‘effect’. 

Research Question, Hypothesis, Aim and Objectives

This video helps you to formulate the research question(s), hypothesis(es), aims and objectives of your dissertation. It defines these terms and provides tips for writing these elements well. 

• Handout This handout includes activities to get the best from the video. Open it!
• PPT slides PPT slides on research questions, hypotheses, aims and objectives
• Feedback form Please give us feedback on our videos!

Devising Your Research Methods

Once you have decided on your research question or hypothesis, you can start to think about your research methods. The method is the way you will provide an answer to your research question, or test your hypothesis.  

Are you going to use literature (secondary sources) only? Or are you going to use primary sources too? If so, existing data (secondary data, e.g. statistics, company data) or data you’ll find yourself (primary data, e.g. interviews, questionnaires, experiments)? Is the research going to be qualitative or quantitative? Will you need ethical clearance? 

To get started on devising your methodology you might want to have a look at the research methods others have used. When considering which methods to use, ask yourself: 

Is this a good method? 

What makes it a good method? 

Why did the researchers choose this method? 

Are there any limitations? 

Were any factors not considered? 

Were there any biases? 

Why would this work/not work for my research? 

Can I improve this method in any way? 

For more guidance on approach, check out the Methodology Guide . 

Creswell, J. and Creswell, J. (2018). Research Design: Qualitative, Quantitative and Mixed Methods Approaches . London: Sage

Hulley, S., Cummings, S. and Browner, W. (2007). Designing Clinical Research . England: Lippincott Williams and Wilkins.

Locke, L., Spirduso, W. and Silverman, S. (2014).  Proposals that work . Thousand Oaks, CA: SAGE.

Swanborn, P. (2010). Case Study Research: What, Why and How . London: Sage.

• << Previous: Choosing A Topic and Researching
• Next: Thinking Of A Title >>
• Last Updated: Aug 1, 2023 2:36 PM
• URL: https://libguides.westminster.ac.uk/starting-your-dissertation

CONNECT WITH US

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Dissertation

What Is a Dissertation? | 5 Essential Questions to Get Started

Published on 26 March 2020 by Jack Caulfield . Revised on 5 May 2022.

A dissertation is a large research project undertaken at the end of a degree. It involves in-depth consideration of a problem or question chosen by the student. It is usually the largest (and final) piece of written work produced during a degree.

The length and structure of a dissertation vary widely depending on the level and field of study. However, there are some key questions that can help you understand the requirements and get started on your dissertation project.

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

Table of contents

When and why do you have to write a dissertation, who will supervise your dissertation, what type of research will you do, how should your dissertation be structured, what formatting and referencing rules do you have to follow, frequently asked questions about dissertations.

A dissertation, sometimes called a thesis, comes at the end of an undergraduate or postgraduate degree. It is a larger project than the other essays you’ve written, requiring a higher word count and a greater depth of research.

You’ll generally work on your dissertation during the final year of your degree, over a longer period than you would take for a standard essay . For example, the dissertation might be your main focus for the last six months of your degree.

Why is the dissertation important?

The dissertation is a test of your capacity for independent research. You are given a lot of autonomy in writing your dissertation: you come up with your own ideas, conduct your own research, and write and structure the text by yourself.

This means that it is an important preparation for your future, whether you continue in academia or not: it teaches you to manage your own time, generate original ideas, and work independently.

The only proofreading tool specialized in correcting academic writing

The academic proofreading tool has been trained on 1000s of academic texts and by native English editors. Making it the most accurate and reliable proofreading tool for students.

Correct my document today

During the planning and writing of your dissertation, you’ll work with a supervisor from your department. The supervisor’s job is to give you feedback and advice throughout the process.

The dissertation supervisor is often assigned by the department, but you might be allowed to indicate preferences or approach potential supervisors. If so, try to pick someone who is familiar with your chosen topic, whom you get along with on a personal level, and whose feedback you’ve found useful in the past.

How will your supervisor help you?

Your supervisor is there to guide you through the dissertation project, but you’re still working independently. They can give feedback on your ideas, but not come up with ideas for you.

You may need to take the initiative to request an initial meeting with your supervisor. Then you can plan out your future meetings and set reasonable deadlines for things like completion of data collection, a structure outline, a first chapter, a first draft, and so on.

Make sure to prepare in advance for your meetings. Formulate your ideas as fully as you can, and determine where exactly you’re having difficulties so you can ask your supervisor for specific advice.

Your approach to your dissertation will vary depending on your field of study. The first thing to consider is whether you will do empirical research , which involves collecting original data, or non-empirical research , which involves analysing sources.

Empirical dissertations (sciences)

An empirical dissertation focuses on collecting and analysing original data. You’ll usually write this type of dissertation if you are studying a subject in the sciences or social sciences.

• What are airline workers’ attitudes towards the challenges posed for their industry by climate change?
• How effective is cognitive behavioural therapy in treating depression in young adults?
• What are the short-term health effects of switching from smoking cigarettes to e-cigarettes?

There are many different empirical research methods you can use to answer these questions – for example, experiments , observations, surveys , and interviews.

When doing empirical research, you need to consider things like the variables you will investigate, the reliability and validity of your measurements, and your sampling method . The aim is to produce robust, reproducible scientific knowledge.

Non-empirical dissertations (arts and humanities)

A non-empirical dissertation works with existing research or other texts, presenting original analysis, critique and argumentation, but no original data. This approach is typical of arts and humanities subjects.

• What attitudes did commentators in the British press take towards the French Revolution in 1789–1792?
• How do the themes of gender and inheritance intersect in Shakespeare’s Macbeth ?
• How did Plato’s Republic and Thomas More’s Utopia influence nineteenth century utopian socialist thought?

The first steps in this type of dissertation are to decide on your topic and begin collecting your primary and secondary sources .

Primary sources are the direct objects of your research. They give you first-hand evidence about your subject. Examples of primary sources include novels, artworks and historical documents.

Secondary sources provide information that informs your analysis. They describe, interpret, or evaluate information from primary sources. For example, you might consider previous analyses of the novel or author you are working on, or theoretical texts that you plan to apply to your primary sources.

Dissertations are divided into chapters and sections. Empirical dissertations usually follow a standard structure, while non-empirical dissertations are more flexible.

Structure of an empirical dissertation

Empirical dissertations generally include these chapters:

• Introduction : An explanation of your topic and the research question(s) you want to answer.
• Literature review : A survey and evaluation of previous research on your topic.
• Methodology : An explanation of how you collected and analysed your data.
• Results : A brief description of what you found.
• Discussion : Interpretation of what these results reveal.
• Conclusion : Answers to your research question(s) and summary of what your findings contribute to knowledge in your field.

Sometimes the order or naming of chapters might be slightly different, but all of the above information must be included in order to produce thorough, valid scientific research.

Other dissertation structures

If your dissertation doesn’t involve data collection, your structure is more flexible. You can think of it like an extended essay – the text should be logically organised in a way that serves your argument:

• Introduction: An explanation of your topic and the question(s) you want to answer.
• Main body: The development of your analysis, usually divided into 2–4 chapters.
• Conclusion: Answers to your research question(s) and summary of what your analysis contributes to knowledge in your field.

The chapters of the main body can be organised around different themes, time periods, or texts. Below you can see some example structures for dissertations in different subjects.

• Political philosophy

This example, on the topic of the British press’s coverage of the French Revolution, shows how you might structure each chapter around a specific theme.

This example, on the topic of Plato’s and More’s influences on utopian socialist thought, shows a different approach to dividing the chapters by theme.

This example, a master’s dissertation on the topic of how writers respond to persecution, shows how you can also use section headings within each chapter. Each of the three chapters deals with a specific text, while the sections are organised thematically.

Prevent plagiarism, run a free check.

Like other academic texts, it’s important that your dissertation follows the formatting guidelines set out by your university. You can lose marks unnecessarily over mistakes, so it’s worth taking the time to get all these elements right.

Formatting guidelines concern things like:

• line spacing
• page numbers
• punctuation
• title pages
• presentation of tables and figures

If you’re unsure about the formatting requirements, check with your supervisor or department. You can lose marks unnecessarily over mistakes, so it’s worth taking the time to get all these elements right.

How will you reference your sources?

Referencing means properly listing the sources you cite and refer to in your dissertation, so that the reader can find them. This avoids plagiarism by acknowledging where you’ve used the work of others.

Keep track of everything you read as you prepare your dissertation. The key information to note down for a reference is:

• The publication date
• Page numbers for the parts you refer to (especially when using direct quotes)

Different referencing styles each have their own specific rules for how to reference. The most commonly used styles in UK universities are listed below.

You can use the free APA Reference Generator to automatically create and store your references.

APA Reference Generator

The words ‘ dissertation ’ and ‘thesis’ both refer to a large written research project undertaken to complete a degree, but they are used differently depending on the country:

• In the UK, you write a dissertation at the end of a bachelor’s or master’s degree, and you write a thesis to complete a PhD.
• In the US, it’s the other way around: you may write a thesis at the end of a bachelor’s or master’s degree, and you write a dissertation to complete a PhD.

The main difference is in terms of scale – a dissertation is usually much longer than the other essays you complete during your degree.

Another key difference is that you are given much more independence when working on a dissertation. You choose your own dissertation topic , and you have to conduct the research and write the dissertation yourself (with some assistance from your supervisor).

Dissertation word counts vary widely across different fields, institutions, and levels of education:

• An undergraduate dissertation is typically 8,000–15,000 words
• A master’s dissertation is typically 12,000–50,000 words
• A PhD thesis is typically book-length: 70,000–100,000 words

However, none of these are strict guidelines – your word count may be lower or higher than the numbers stated here. Always check the guidelines provided by your university to determine how long your own dissertation should be.

At the bachelor’s and master’s levels, the dissertation is usually the main focus of your final year. You might work on it (alongside other classes) for the entirety of the final year, or for the last six months. This includes formulating an idea, doing the research, and writing up.

A PhD thesis takes a longer time, as the thesis is the main focus of the degree. A PhD thesis might be being formulated and worked on for the whole four years of the degree program. The writing process alone can take around 18 months.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

Caulfield, J. (2022, May 05). What Is a Dissertation? | 5 Essential Questions to Get Started. Scribbr. Retrieved 13 May 2024, from https://www.scribbr.co.uk/thesis-dissertation/what-is-a-dissertation/

Is this article helpful?

Jack Caulfield

Other students also liked, how to choose a dissertation topic | 8 steps to follow, how to write a dissertation proposal | a step-by-step guide, what is a literature review | guide, template, & examples.

Comparison of Soil Carbon Dynamics Between Restored Prairie and Agricultural Soils in the U.S. Midwest

Globally, soils hold more carbon than both the atmosphere and aboveground terrestrial biosphere combined. Changes in land use and land cover have the potential to alter soil carbon cycling throughout the soil profile, from the surface to meters deep, yet most studies focus only on the near surface impact ( 3 and C 4 photosynthetic pathway plant community composition. Comparative analysis of edaphic properties and soil carbon suggests that deep loess deposits in Nebraska permit enhanced water infiltration and SOC deposition to depths of ~100 cm in 60 years of prairie restoration. In Illinois, poorly drained, clay/lime rich soils on glacial till and a younger restored prairie age (15 years) restricted the influence of prairie restoration to the upper 30 cm. Comparing the δ 13 C values of SOC and SIC in each system demonstrated that SIC at each site is likely of lithogenic origin. This work indicates that the magnitude of influence of restoration management is dependent on edaphic properties inherited from geological and geomorphological controls. Future work should quantify root structures and redox properties to better understand the influence of rooting depth on soil carbon concentrations. Fast-cycling C dynamics can be assessed using continuous, in-situ CO 2 and O 2 soil gas concentration changes. The secondary objective of my thesis was to determine if manual, low temporal resolution gas sampling and analysis are a low cost and effective means of measuring soil O 2 and CO 2 , by comparing it with data from in-situ continuous (hourly) sensors. Manual analysis of soil CO 2 and O 2 from field replicates of buried gas collection cups resulted in measurement differences from the continuous sensors. Measuring CO2 concentration with manual methods often resulted in higher concentrations than hourly, continuous measurements across all sites. Additionally, O 2 concentrations measured by manual methods were higher than hourly values in the restored prairie and less in agricultural sites. A variety of spatial variability, pressure perturbations, calibration offsets, and system leakage influences on both analysis methods could cause the discrepancy.

NSF Grant 1331906

Degree type.

• Master of Science
• Earth, Atmospheric and Planetary Sciences

Campus location

• West Lafayette

Advisor/Supervisor/Committee Chair

Additional committee member 2, additional committee member 3, additional committee member 4, additional committee member 5, usage metrics.

• Environmental biogeochemistry
• Soil chemistry and soil carbon sequestration (excl. carbon sequestration science)

• Weird But True
• Sex & Relationships
• Viral Trends
• Human Interest
• Fashion & Beauty
• Food & Drink

trending now in Lifestyle

You have one more chance to see the Northern Lights: These are...

Bride calls out wedding guest's 'ridiculous' RSVP: 'Nothing I can...

I'm a doc — and this embarrassing health issue is actually very...

Millennials just 'can’t do it': Weird quirk that makes folks...

Disgusted travelers film couple amid 'sex act' on British Airways...

Dear Abby: I've called my situationship 100 times with no answer...

Bride and groom blasted for 15 outrageous wedding-day rules for...

Women expose scary reality of dating men -- and why some have...

Dear Abby: I’ve called my situationship 100 times with no answer — should I give up?

• View Author Archive
• Get author RSS feed

Thanks for contacting us. We've received your submission.

DEAR ABBY: I am a middle-aged gay man who has never had any serious relationships. A few months ago, I met a 22-year-old guy. He seemed really sweet and nice, and we had good times when we were together, so I let him use me for money. He played on the feelings I thought I had for him, and I think I still do.

The other night, I caught him lying to me again and went off the deep end. He ended up blocking my number, so I know he’s not getting my text messages. I have called him at least 100 times and it goes straight to voicemail. Must I just chalk it up as “lesson learned” and try to go on? 

I doubt I will ever forget him. I know I need to go on with my life. He’s in my head right now and it’s difficult. If it were to happen, I can’t go back to him the way we were. Although this may sound stupid and immature, I think I fell in love with him. I’m not sure. He hurt me badly because I let him use me. Thank you for any advice you can offer. — TRICKED IN TENNESSEE

DEAR TRICKED: I’m sorry you’re hurting but, yes, you should chalk this up as a lesson learned. You stated you’ve never had a serious relationship. If you would like to pursue one, meeting someone closer to your age with whom you have more in common would be beneficial. Check in at your nearest LGBTQ community center and sign up for an activity or event and you may meet someone. I wish you luck.

DEAR ABBY: I am a caregiver for my elderly diabetic mother and my disabled husband, who is an alcoholic and also epileptic. Every single household responsibility falls on me — cleaning, upkeep, shopping, driving, food preparation, etc. My mother refuses to eat right for her medical condition. It’s a daily struggle. I keep everything on hand to make it easy for her, but I still have to beg and plead. 

I am not well. I have several autoimmune diseases that zap my strength. I love my mom and my husband, but this has taken every bit of joy from my life. My mother doesn’t have dementia — she’s very aware of what she is doing. 

As for my husband, his love for me will never come close to his love of alcohol. He is never abusive, but I have never felt so overwhelmed and alone at the same time. There are no siblings to help, and my children live out of state. Do you have any suggestions on how to keep what is left of my sanity? — OVERWORKED IN VIRGINIA

DEAR OVERWORKED: Yes, I do, but you may not like what I have to say. It’s time to quit trying to “save” your mother and your husband from the fates they have chosen. Your mother is an adult and in possession of her faculties. Let her assume responsibility for herself and her treatment. (Or not — also her choice.) 

As to your husband’s alcoholism, join Al-Anon and start attending meetings. Only he can fix his drinking problem if he wants to. Ruining your health trying to help people who don’t want to be helped may be well-intentioned, but it is also misguided.

Dear Abby is written by Abigail Van Buren, also known as Jeanne Phillips, and was founded by her mother, Pauline Phillips. Contact Dear Abby at http://www.DearAbby.com or P.O. Box 69440, Los Angeles, CA 90069.

Share this article: