Tan, Raymond
BELO, Lawrence P. GALVEZ, Ma. Cecilia D. | ||
AURESENIA, Joseph L. | ||
PROMENTILLA, Michael Angelo B. ORBECIDO, Aileen H. | ||
BELO, Lawrence P. MALABED, Raymond S. | ||
BELTRAN, Arnel B. | ||
PROMENTILLA, Michael Angelo B. ORBECIDO, Aileen H. | ||
BUNGAY, Vergel C. | ||
MADRAZO, Cynthia F. | ||
BUNGAY, Vergel C. | ||
Orbecido, Aileen H. | ||
BELTRAN, Arnel B. | ||
Orbecido, Aileen H. |
Beltran, Arnel B. | ||
Bungay, Vergel C. | ||
Madrazo, Cynthia F. Bungay, Vergel C. | ||
Aviso, Kathleen B. Beltran, Arnel B. | ||
Orbecido, Aileen H. | ||
Beltran, Arnel B. | ||
Orbecido, Aileen, H | ||
Beltran, Arnel B. Uba, Marygold | ||
Aviso, Kathleen | ||
Aviso, Kathleen B Razon, Luis F | ||
Aviso, Kathleen B Tan, Raymond R | ||
Tan, Raymond R. Aviso, Kathleen |
Dr. Cynthia F. Madrazo Dr. Luis Razon | ||
Dr. Nathaniel P. Dugos Dr. Lawrence P. Belo | ||
Dr. Lawrence P. Belo Dr. Cynthia F. Madrazo | ||
Dr. Joseph Auresenia | ||
Dr. Kathleen B. Aviso Dr. Raymond R. Tan | ||
Dr. Susan A. Roces Dr. Nathaniel P. Dugos | ||
Dr. Joseph Auresenia | ||
Dr. Cynthia F. Madrazo Dr. Josephine Q. Borja Ms. Marylou M. Uy | ||
Dr. Vergel C. Bungay | ||
Dr. Cynthia F. Madrazo | ||
Dr. Michael Angelo B. Promentilla |
Dr. Kathleen B. Aviso Dr. Michael Angelo B. Promentilla | ||
Dr. Luis F. Razon Dr. Cynthia F. Madrazo | ||
Dr. Joseph L. Auresenia | ||
Dr. Joseph L. Auresenia | ||
Dr. Nathaniel P. Dugos Dr. Vergel C. Bungay | ||
Dr. Susan A Roces Dr. Nathaniel P. Dugos | ||
Dr. Lawrence P. Belo Dr. Carl Renan E. Estrellan | ||
Dr. Kathleen B. Aviso Dr. Raymond Girard R. Tan | ||
Dr. Susan A. Roces Dr. Nathaniel P. Dugos | ||
Dr. Aileen H. Orbecido Dr. Arnel Beltran | ||
Dr. Lawrence P. Belo | ||
Dr. Vergel C. Bungay | ||
Dr. Susan Roces | ||
Dr. Arnel B. Beltran Dr. Aileen H. Orbecido |
Identifier Title Adviser Solvent Extraction of Phenolic Compounds From Mangifera Indica L. Seed Kernels Dr. Cynthia F. Madrazo The Effect of Temperature on the Measurement of Diffusion Coefficients and Antioxidant Activities of Ascorbic Acid Found in Guava Juice Using Cyclic Voltammetry Dr. Nathaniel P. Dugos Ms. Marylou Uy Biomass Productivity and Carbon Dioxide Utilization of Ankistrodesmus Falcatus in Bicarbonate-based Integrated Carbon Capture and Algae Production System (Biccaps) Dr. Arnel B. Beltran Dr. Joseph L. Auresenia Prioritization of Low-carbon Technology For Electricity Generation in the Philippines Using Calibrated Fuzzy Ahp Dr. Michael Angelo B. Promentilla Production and Characterization of Bio-oil From Pyrolysis of Spiny Bamboo (Bambusa Blumeana) Dr. Florinda Bacani Extraction of Phenolic Compounds From Philippine Carabao Mango (Mangifera Indica L.) Seed Kernel Using Subcritical Water Dr. Cynthia F. Madrazo Dr. Pag-asa D. Gaspillo Ranking of Carbon Nanotube Production Methods via Verbal Decision Analysis Dr. Michael Angelo B. Promentilla Dr. Kathleen B. Aviso Carbon Dioxide Capture Using Aqueous Monoethanolamine and Biodiesel Production From Chlorella Ellipsoidea, Spirulina and Nannochloropsis Sp. Dr. Joseph L. Auresenia Carbon Nanotubes Synthesis Using Iron Catalyst on Magnesium Oxide Substrate Through Microwave Plasma Chemical Vapor Deposition Dr. Joseph L. Auresenia Evaluation of the Physicochemical Properties of Petroleum Nut (Pittosporum Resiniferum) Oil Dr. Susan A. Roces Dr. Nathaniel P. Dugos Microwave-assisted Extraction of Phenolics From Pineapple (Ananas Comosus) Peel for Green Zero-valent Iron Production Dr. Cynthia F. Madrazo Ms. Marylou M. Uy Performance Evaluation of Moringa Oleifera Functionalized Rice Husk Ash as a Biofilter for Drinking Water Treatment Dr. Aileen Huelgas Orbecido
Identifier Title Adviser Preparation of an Antimicrobial Extract From Seeds, Pulp and Peelings of Philippine Calamansi (Citrus Mitis) Fruit Against Escherichia Coli Dr. Susan Gallardo Emission Testing and Engine Performance of Diesel Engine Using Stable Blends of Soya Methyl Esters and Diesel Dr. Susan A. Roces Dr. Nathaniel P. Dugos Solvent-free Microwave Extraction of Turmerone Oil From Turmeric Ms. Marylou M. Uy A Simplified Dynamic Model of the Global Carbon-nitrogen Cycle Dr. Luis F. Razon Dr. Raymond R. Tan Free Fatty Acid Content Reduction of Simulated Waste Cooking Oil by Glycerol Transesterification Using Conventional Heating Dr. Susan A. Roces Dr. Nathaniel P. Dugos The Effect of Culture Media Type and Biofilm Support of a Photobioreactor to the Biomass Yield of Nannochloropsis Sp Dr. Michelle Almendrala Dr. Joseph L. Auresenia Color and Cod Removal Using Electrocoagulation for Post Treatment of Bio-treated Spent Distillery Wastewater Dr. Pag-asa D. Gaspillo Dr. Leonila C. Abella Determination of the Optimum Combination of Alkali Activator/fly Ash Ratio and NA2SIO3/NAOH Ratio for the Solidification/stabilization of Chromium-contaminated Soil Using Fly Ash-based Geopolymer Dr. Florinda T. Bacani Dr. Michael B. Promentilla A Membrane Based Study on the Performance of Ultrafiltration Polysulfone Hollow Fiber Membrane in the Enrichment of Polyphenols From Dilute Sugarcane Molasses Dr. Michelle Caravana Almendrala Determination of Combustion Efficiency of the Chemical Looping Combustion of Semirara Coal With Fe3O4-FeO Through Thermogravimetric and Solid Residue Analysis Ms. Marylou M. Uy Dr. Nathaniel P. Dugos Determination of Concentration and Diffusion Coefficient of Arsenic and Manganese in Santo Angel Production Well by Voltammetry Dr. Nathaniel P. Dugos Dr. Josephine Q. Borja Theoretical Investigation of Edge-decorated Zigzag Graphene Nanoribbons by Scandium Doped With Lithium: a Potential Hydrogen Storage Material Dr. Michael Mananghaya
Identifier Title Adviser Development of an Optimization Model for the Microalgal Biofuel Supply Chain Considering Co2 Emission, Land Use and Water Comsumption Ms. Kathleen B. Aviso Mr. Raymond Tan Carbon Capture via Wetted Wall Column: Determining the Effect of Sodium Glycinate Concentration on Carbon Dioxide Absorption and Overall Mass Transfer Coefficient Dr. Susan Roces Dr. Nathaniel P. Dugos Catalytic Activity of CUO-CEO2-AC for CO Oxidation Catalytic Activity of CUO-CEO2-AC for CO Oxidation Ms. Susan M. Gallardo Life Cycle Assessment of the Greenhouse Gas Emissions, Land, Water and Energy Usage Arising From the Production and Use of Coconut Biodiesel in the Philippines Mr. Luis F. Razon Preparation and Characterization of Biodegradable Film From Wheat Flour and Rice Bran Extract Dr. Cynthia Fabian-Madrazo Analysis of the Flue Gas in an Iron Oxide – Semirara Coal Chemical Looping Combustion System Ms. Marylou Uy Dr. Nathaniel Dugos Evaluation of Fuel Properties of Charcoal Briquettes Derived From Combinations of Coconut Shell, Corn Cob and Sugarcane Bagasse Dr. Florinda T. Bacani Fatty Acid Profile and Predicted Biodiesel Fuel Properties of Premna Odorata Blanco (ALAGAW) and Melanolepis Multiglandulosa (ALIM) Seed Oils Dr. Luis F. Razon Dr. Cynthia F. Madrazo Effect of Particle Size, Solvent, and Extraction Time on Tannin Extract From Spondias Purpurea Bark Through Soxhlet Extraction Dr. Florinda T. Bacani Effect of Carbonized Rice Husk to Binder Mixture Ratio and Briquetting Temperature on the Properties of Charcoal Briquettes From Rice Husk Dr. Florinda T. Bacani Degradation of Dichlorodiphenyltrichloroethane (Ddt) in Water Matrix Using Bimetallic Nano Zero-valent Iron/copper Dr. Josephine Q. Borja Dr. Joseph Auresenia Etraction of Phenolic Compounds From Defatted Rice Bran by Two-step Methanol-alkali Process and Subrictical Water Extraction Dr. Cynthia F. Madrazo Evaluation of the Temperature Tolerance Level of Sachharomyces Cerevisae Through Acclimatization Dr. Josephine Q. Borja Dr. Joseph Auresenia Removal of Arsenic by Adsorption Using Pervious Concrete Partially Substituted With Fly Ash Ms. Susan M. Gallardo Evaluation of E-waste Management System in the Philippines Using Ahp-swot Method: a Case Study on Mobile Phone Take-back Scheme Dr. Michael Angelo B. Promentilla Dr. Ricardo Villavert Characterization of Microstructure- Transport Properties of Deteriorated Cement Paste From Computed Tomography (Ct) Images Dr. Michael Angelo B. Promentilla Engine Performance and Exhaust Gas Emission of Stable Blends of Diesel- Coconut Oil Biodiesel- Ethanol Dr. Nathaniel P. Dugos Dr. Susan A. Roces Synthesis of Green Zero-valent Iron Using Polyphenols From Dried Green Tea Extract Dr. Josephine Q. Borja Dr. Nathaniel P. Dugos Dr. Erison C. Roque Leaching of Chromium From Coal Ash Using Citric Acid, Oxalic Acid and Gluconic Acid by Batch Leaching Procedure Dr. Susan Gallardo The Effects of Operational Parameters in the Treatment of Simulated Quick Service Restaurant Wastewater by Electrocoagulation Using Aluminum-iron Electrode Pair Dr. Pag-asa D. Gaspillo
Identifier Title Adviser A Decision Modeling Approach For Renewable Energy Resource Planning In The Philippines Dr. Michael Angelo B. Promentilla Dr. Raymond Tan Catalytic Activity Of CUO-CEO2-AC For Co Oxidation Ms. Susan M. Gallardo Development Of An Optimization Model For The Microalgal Biofuel Supply Chain Considering Co2 Emission, Land Use and Water Consumption Ms. Kathleen B. Aviso Mr. Raymond Tan Life Cycle Assessment Of The Greenhouse Gas Emissions, Land, Water and Energy Usage Arising From the Production and Use of Coconut Biodiesel in the Philippines Mr. Luis F.Razon
Identifier Title Adviser A Decision Modeling Approach for Renewable Energy Resource Planning in the Philippines Dr Michael Promentilla Dr Raymond Girard Tan Analysis of the effect of temperature variation on the percent absorption of carbon dioxide aqueous ammonia solution Nathaniel Dugos Susan Roces Performance of diesel engine using blends of waste cooking oil as methyl ester Susan Roces Study catalytic activities of impregnated copper oxide-cerium oxide catalysts support by pre-treated activated carbon from coco shells for complete oxidation of carbon monoxide Susan Gallardo Carbon capture technology via chemical looping Marylou Uy Nathaniel Dugos Charcoal briquetting using rice husks in Bagac, Bataan Florinda Bacani Separation of water-ethanol system through extractive distillation with the use of magnesium chloride and bioglycerol as entrainers Nathaniel Dugos Production of graphene through a two-step reduction Joseph Auresenia Developing carbon footprint calculator Raymond Tan Kathleen Aviso Copper Recovery from Copper rich industrial wastewater using zero valent iron Wilheliza Baraoidan Evaluation of thermo-tolerant saccharomyces C. in batch fermentation using acclimitization Josephine Borja Evaluation of photocatalytic paint containing nano-titanium in degradation of organic pollutants Michael Promentilla Optimization of the degradation of TCE using zero-valent iron in the presence of cyclodextrin Wilheliza Baraoidan Efficiency optimization of dye-sensitized solar cells by titanium (IV) oxide and multiwall carbon nanotube electrode thickness by RSM Joseph Auresenia Life cycle assessment of coconut biodiesel in the Philippines Louie Razon Phenolic acid profile of rice bran using aqueous organic solvent and subcritical water extraction method Cynthia Madrazo Biodegradation of halogenated organic compounds using microbial film Josephine Borja Photocatalytic decolorization of lignin in water matrix using sol-gel derived nano-TiO2 co-doped with iron and mobium Susan Gallardo CO2 absorption in a fabricated wetted wall column using varying concentrations of liquid ammoniaSusan Roces Nathaniel Dugos NZVI and its application to waste water treatment Josephine Borja Saccharification of Microwave Pretreated Kenaf (Hibiscus Cannabinus) Using Rumen Fluid Florinda Bacani EFFECT OF COBALT IN DDT DEGRADATION USING EMULSIFIED AND NON-EMULSIFIED ZERO VALENT IRON (ZVI) Josephine Borja Joseph Auresenia Evaluation of Iron Oxide from Scrap Metal as Oxygen Carrier in Chemical-Looping Combustion of Philippine Coal Nathaniel Dugos Susan Roces TAMARINDUS INDICA SEED OIL AS AN ALTERNATIVE FEEDSTOCK FOR THE PRODUCTION OF FATTY ACID METHYL ESTERS (FAME)Louie Razon Carbon Dioxide Absorption Using Monoethanolamine and Biofixation by Chlorella vulgaris through Biomass Conversion Joseph Auresenia
Identifier Title Adviser Treatment of Quick Service Restaurant Wastewater by Electrocoagulation Josephine Q. Borja Aileen Huelgas Elaine G. Mission Copper Recovery from an Industrial Metal Company Wastewater by Electrolysis Wilheliza Baraoidan Biodiesel Production of Cocos Nucifera by in situ Transesterification using Methanol as Alcohol Solvent, nButanol as Alkanols Co-solvent, and Sodium Hydroxide as Homogeneous Base Catalyst Luis F. Razon Raymond R. Tan Alkali-catalyzed Transesterification of waste cooking oil (WCO) by Conventional Heating Susan Roces Florinda T. Bacani Raymond R. Tan Solvent Free Microwave Extraction of Oil From Kenaf Seeds and a Study on its Dielectric Properties Florinda T. Bacani Transesterification of Jatropha Curcas L. Oil with Ethanol Using Conventional and Microwave Heating Susan Roces Soxhlet Extraction of Philippine Avocado Fruit Pulp Variety 240 (Persea Americana) Marylou Uy Susan Roces Florinda T. Bacani Joseph Auresenia Kane’s Simulation Modeling of Biofuel Production Dynamics in the Philippines Raymond R. Tan Luis F. Razon Design, Fabrication,and Testing of Wetted Wall Column for carbon capture using aqueous ammonia Susan Roces Nathaniel Dugos Fabrication of Bioreactor Utilizing Hollow Fiber Membrane for the Rumen Hydrolysis of Sweet Sorghum Florinda T. Bacani Evaluation of Public Awareness and Perception of Climate Change Mitigation Options in the Philippines Micheal Angelo Promentilla Production of Algae for Biodiesel Feedstock using Nutrients from Domestic Wastewater Effluent Joseph Auresenia The Leachability of Chromium from Coal Ash Using Serial Batch Leaching Procedure Susan M. Gallardo Pilot-scale Investigation of the Solar Photodegradation of Wastewater Containing Turquoise Blue Dye Nanotitania/ AC Composite Catalyst Susan M. Gallardo Dante Dacanay Elicitation of Polyhydroxyalkanoates (PHA) from Bacillus Subtilitis in Fermentor SysytemFlorinda T. Bacani Effect of Copper on Activated Carbon Activity during Methane Decomposition Leonilla C. Abella Monroy, Teddy G. Production of Bioethanol from Mushroom and Alkali Pretreated Sawdust using Multiple Stage HydrolysisJoseph Auresenia Josephine Borja Biodiesel Production of Cocos Nucifera by in situ Transesterification using Methanol as Alcohol Solvent, n-Butanol as Alkanols Co-Solvent, and Sodium Hydroxide as Homogeneous Base Catalyst Luis F. Razon Raymond R. Tan Copper Recovery from an Industrial Metal Company Wastewater by Electrolysis Wilheliza Baraoidan Lawrence Belo EFFECT OF COBALT IN DDT DEGRADATION USING EMULSIFIED AND NON-EMULSIFIED ZERO VALENT IRON (ZVI) Josephine Q. Borja Joseph Auresenia Saccharification of Microwave Pretreated Kenaf (Hibiscus Cannabinus) Bast Fiber Using Carabao Rumen Fluid Florinda T. Bacani Solvent Free Microwave Extraction of Oil from Kenaf Seeds and a Study on its Dielectric Properties Florinda T. Bacani Alkali-Catalyzed Transesterification of Waste Cooking Oil (WCO) by Conventional Heating Susan Roces Transesterification of Jatropha Cureas L. Oil with Ethanol Using Conventional and Microwave Heating Susan Roces Estimation of Cetane Number from Fatty Acid Methyl Ester Profile of Pure and Binary Algal Cultures as Biodiesel Feedstock Joseph Auresenia
Identifier Title Adviser TU15948 Conversion of Lignocelluloses into bioethanol utilizing hardwood sawdust used for pleurotus ostreatus cultivation Mr. Joseph AureseniaTU15946 Removal of arsenic from simulated groundwater by adsorption using fly ash from sub-bituminous and bituminous coal Ms. Abella, Leonila Gaspilio Pag-asa, Monroy, Teddy G.TU15944 Microwave-assisted extraction of polyphenol from coffee liberica L Ms. Marylou M. Uy Ms. Josephine Q. Borja
Note that while on work term you have full access to the University of Waterloo library electronic resources. For off-campus access to resources that require a subscription you may have to sign-in to the library proxy server .
For chemical engineering-related resources, a good starting point has been set-up by the library. The Kirk Othmer Encyclopedia of Chemical Technology is an excellent place to start for many topics, and is a massive resource dedicated to chemical engineering topics.
If your work term situation does not result in a suitable topic for a report, consider the following suggestions:
Contact the chemical engineering undergraduate office. We can help you sort out some ideas.
Home > FACULTIES > Chemical and Biochemical Engineering > CHEMENG-ETD
This collection contains theses and dissertations from the Department of Chemical and Biochemical Engineering, collected from the Scholarship@Western Electronic Thesis and Dissertation Repository
Innovative Techniques for Partially Upgrading Oil Sand Bitumen to Pipeline Transportable Crude , Moataz Abdrabou
The Effect of Steam Explosion on Lipids Extraction From Microalgae and Derivation of Pectin Films from Waste Culture , Shahil Chhiba
Numerical Study of Ozone Decomposition Reaction Behaviours in Gas-Solids Circulating Fluidized Bed Reactors , Zhengyuan Deng
Scale-up and Measurement Enhancements of a BioGenerator Bioreactor , Jason J. Glas
Liquid Flow Rates Measurements Through Graphene Nanopores by Micro-PIV , Samuel Francisco De Jesus Gomez Suarez
Design of Active Pharmaceutical Ingredients Solid States in Crystallization Processes , Weizhong Gong
Development of Biolubricants from Vegetable Oils for Non-Internal Combustion Engine Applications , Behzad Kamiab
Investigation of Segregation in Mixing Pharmaceutical Powders using Passive Acoustic Emissions in a V-blender , Omar Salem
Upgrading of Vapors and Gases from Pyrolysis to Valued Added Gaseous Products , Ivan Santiago
Nutrients recovery from effluent using membrane distillation. , Arslan Tahir
Syntheses and Electrospinning of Poly(Amino Acid Ester) Phosphazene Biomaterials for Tissue Engineering Applications , Meng Wang
Hydrodeoxygenation (HDO) upgrading of pyrolysis bio-oils: developing novel carbon-supported catalysts and addressing process corrosion challenges , Mingyuan Zhang
Application of Crystal Engineering in Multicomponent Pharmaceutical Crystals: A Study of Theory and Practice , Soroush Ahmadi Nasrabadi
Effect of process parameters on the mechanical properties of carbon fiber epoxy composites by wet compression molding , Saboora Ayatollahi
Catalytic Consequences of Catalyst Pellet Architecture on the Methanol to Oxymethylene Process , Sebastian M K Cook
Investigation of Microplastic Removal Using Foam Produced from Rhamnolipids , Ana M. Giron
Capacitive Wall Shear Stress Sensors Based on Carbon Nanotube Pillars , Brandon N. Julien
Modeling and multi-objective optimization of wastewater treatment process , Navneet Kaur
Investigation of Foam based Photobioreactor for the Cultivation of Chlorella vulgaris CPCC 90 , Anuradha Krishnan
Supercritical Water Gasification (SCWG) of Lignocellulosic Biomass for Hydrogen Production: Reaction Kinetics and Corrosion Performance of Candidate Constructional Alloy , Haoyang Li
Advanced oxidation of water micropollutants by ozone and hydrogen peroxide: Process intensification in a novel multiphase technology , Jaime F. Mata de la Vega
Investigation Of Heavy Metal Removal From Synthetic Desalter Effluent Using a Two-Step Approach by Micellar-Enhanced Ultrafiltration and Microbial Fuel Cell , Carlos Munoz-Cupa
Conversion of Biomass Derived Tar in a Catalytic Post-Gasification Process , Floria Rojas Chaves
Value Added Products from Nonconventional Agricultural Biomass Waste Through Thermochemical Transformation , Nicolas A. Sarmiento
Biosurfactant Production by Fermentation , Rachel Schneiderman
Agglomerate Breakup in Recirculating Fluidized Beds , Davin M. Tang Mr
Catalytic Relevance of MgAlO Surface Functionalities in the Upgrade of Ethanol to Butanol , Wei Tian
Hydrothermal Liquefaction (HTL) of Lignocellulosic Biomass for Biocrude Production: Reaction Kinetics and Corrosion-Resistance Performance of Candidate Alloys for Reactors , Haoyu Wang
Investigations of Press Bonded Zinc-Rich Powder Coatings , Wenhao Zhu
Production of cellulose-based superabsorbent polymers for soil water retention , Rosa Maria Arredondo Ramirez
Highly efficient de-lignification and reengineering approach to modify wood into a bio-composite and an adsorbent material , Ramon Filipe Beims
Co-gasification of Plastic and Biomass Waste , Joshua J. Cullen
Co-gasification of biomass and plastic waste in a bubbling fluidized bed reactor , Islam ElGhamrawy
Development of a Cold Model Fuild Coker Pilot Plant , Jessica A. Godin
Development of Photocatalytic Reactor System for Dye Degradation from Lab to Pilot Scale , Waleed Jadaa
Novel fed-batch process with in-situ product recovery for glycerol fermentation to butanol using Clostridium pasteurianum , Ammi Jani
The electrical, thermal, and morphological properties of microinjection-molded polypropylene nanocomposites , Renze Jiang
Mechanical Recycling of Flame Retardant-Contaminated Expanded Polystyrene Waste into Structural Materials , Harrison E. Ng
Application of passive acoustic emissions for inline monitoring of segregation prone mixtures in a V-blender , Katherine Wilson
Development of Anti-corrosive Polyester Powder Coatings , Marshall Shuai Yang
Development of Carbon-based Nano-structural Fluorescent Biosensor , Yingqi Zhang
Identification and Distribution Analysis of the Mid-phase in a Low-velocity Gas-solid Fluidized Bed , Zhenan Zhang
Inherently Porous Atomically Thin Membranes for Gas Separation , Harpreet Atwal
Production of Engineered Carbons from Secondary Waste Streams for Environmental Applications , Ghazaleh Chegini
Mitigation of fouling and liquid losses in a Fluid Coker™: Influence of operating conditions and internals on wet-agglomerates contribution to liquid carry-under , Yohann Alain François Cochet
CO2 Derived Carbon Capture Using Microalgae in a PhotoBioCREC Unit , Maureen D. Cordoba Perez
Effect of Pretreatment of Resin Acids on Anaerobic Digestibility of Pulp and Paper Mill's Primary Sludge , Sreejon Das
Fibrin-Based Engineered Vascular Tissues as Platforms for Cellular Studies and Disease Modeling , Khalil Dayekh
Impact of post-pyrolysis wash on biochar powders and their respective granule formations , Anthony Fazzalari
Investigation on Hydrodynamic Behavior in a Liquid-Solid Circulating Conventional Fluidized Bed (CCFB) , Jingya Fu
Production of biopolymers by Aureobasidium pullulans on industrial waste streams , Islam Gawdat
Development of a recombinant brewing yeast to produce beer from hemp extract ( Cannabis Sativa L. ) , Mehmet Ugur Gulmen
A Novel Submerged Photocatalytic Oscillatory Membrane Reactor for Effluent Water Polishing , Siddharth Gupta
Investigation of Electrochemical and Hybrid Microbial Desalination Cells for Environmental Applications , Shawn Nicholas Hamilton
Mitigation of Fluid Coker Cyclone Fouling with Consideration to Reactor Performance , Andrew J. Heaslip
Probing the Role of Silicates for Corrosion Control in Lead Plumbing , Hailey Holmes
Process Modifications and Additives for Anticorrosive Powder Coatings , Jinbao Huang
Growth viability assay assessment for disinfectant screening , Paavana Jayaram
Production of Bio-Based Concrete Water Reducer from Crude Cellulose derived from Woody Biomass , Anthony T. Johnson
Slow Pyrolysis of Vomitoxin-Contaminated Corn in a Batch Reactor , Shokooh Karami
Catechol-Containing Copolymers As An Active Ingredient for Denture Adhesives , Vincent Ying Wun Kong
Treatability of Micropollutants and Microplastics using Selected Wastewater Treatment Processes , Juan Li
Development of New Bonding Technologies for Powder Coatings , Wei Liu
Impact of Local Fluidized Bed Hydrodynamics on the Distribution of Liquid Sprayed into the Bed , Yuan Li
Thermodynamic Vapor-Liquid Equilibrium in Naphtha-Water Mixtures , Sandra Milena Lopez-Zamora
Thermochemical Conversion of Plastic to Value Added Products , Anastasia L. Maslak
Cluster Acceleration and Stabilization in Downflow Catalytic Reactors: Experimental and CPFD Simulation Studies , Cesar Alejandro Medina Pedraza
Using Ionic Liquids in Fabrication of VO2 for Thermochromic Coatings , Shidokht Nazari
Overcoming Technological Challenges for the Commercialization of the Circulating Fluidized Bed Bioreactor for Municipal Wastewater Treatment , Michael J. Nelson
Hydrogen Production Via Photocatalytic Water Splitting Under Near-UV and Visible Light Using Doped Pd TiO2 , Bianca Rusinque
Investigation of Column Packing & Flow Profiles in Packed Chromatographic Columns , Karamjit Singh
A Multifunctional Treatment Process for Combined Sewer Overflow Pollutants and Nutrient Control , Tiziana Venditto
Atomically Thin Nanoporous Graphene Membranes for Fluid Separation , Anika O. K. Wong
A Study of The Deep Learning-based Monitoring and Efficient Numerical Modeling Methodologies for Crystallization Processes , Yuanyi Wu
Comparison of geosmin and 2-methylisoborneol removal by conventional ozonation and co-treatment of potassium ferrate and peroxymonosulfate , Zhaoran Xin
Study on graphene-based nanocomposites with special magnetoresistance properties , Songlin Yang
Experimental study and characterization of bubble behaviors in the orifice-induced hydrodynamic cavitation , Haoxuan Zheng
Development Of Technologies For High Value Products From Biomass Pyrolysis , Chiara Barbiero
Bridging Thermochemical and Biochemical Conversion: Impact of Biochar Addition on the Anaerobic Digestion of Aqueous Pyrolysis Condensate , Neha Batta
Intensification of Clostridium pasteurianum Fermentation Producing n-Butanol From Glycerol using Microfiltration Cell Recycle , Colin W. Couper
CFD Simulations of Bubble Column Equipped with Bundles of Concentric Tubes , Glen C. DSouza
Thermo-catalytic Decarboxylation of Fatty Acids and Real-World Derivatives Towards Liquid Fuels , Shaun J. Fraser
Waste Hemp Fibers (HFs) Derived Porous Carbons: Preparation, Characterization, and Potential Applications , Manju Gurung
Light downshifting zinc oxide-ethylene vinyl acetate nanocomposite greenhouse films , David V. Hiscott
Multiphase Equilibrium in A Novel Batch Dynamic VL-Cell Unit with High Mixing: Apparatus Design and Process Simulation , Jeonghoon Kong
Experimental and Numerical Study of Polymorphism in Crystallization Processes , Mengxing Lin
Design, Fabrication and Applications of Efficient Conductive Polymers for Photocatalytic Antimicrobials , Chunbo Liu
Improved Fermentation Design and Screening Devices for Biobutanol Production , Garret Christopher Munch
Hydrodynamic of a Novel Liquid-Solid Circulating Fluidized Bed Operating Below Particle Terminal Velocity , Xinyu Pan
Ultrasonic Techniques for Characterizations of Oils and Their Emulsions and Monitoring Oil Layer Depth of Spill , Kanu Raigan
Evolution and Flow of Vapors in a Fluidized Bed , Hansen Mangaranap Silitonga
Bubble Dynamics in a Sand Fluidized Bed in the Presence of Biomass Pellets , Nicolas Torres Brauer
The Effect of MoOx Reducibility on its Activity for Anisole Hydrodeoxygenation , Chantal Walker
Extended Study of the Inverse Fluidized Bed Bioreactor for Low C/N Ratio Wastewater Treatment and Hydrodynamics , Lin Wang
Numerical study of the effect of gas distributors and baffles on the bubble distribution, gas and solid mixing in a fluidized bed , Xuelian Xing
Material Properties and Heat Transfer Parameters in Compression Molding of Glass Mat Thermoplastics , Cheng Xu
Biological Nutrient Removal: Minimizing Carbon and Oxygen Requirements , Masuduz Zaman
Improvement of Fluidization Ability for Group A Powders by Fine Powder Additives , Xiaowei Zhang
Value-added Lipids Extraction From Wet Microalgae Using Ionic Liquids , Yujie Zhang
Effects of Drinking Water Treatment Processes on Removal of Algal Matter and Subsequent Water Quality , Ziming Zhao
Advanced Search
Home | About | FAQ | My Account | Accessibility Statement | Privacy | Copyright
©1878 - 2016 Western University
Home > ETD > DEP_CHEMENG > ETDB_CHEMENG
Theses/dissertations from 2023 2023.
Drying kinetics study of medicinal plants used in diabetes treatment , Robby Andre T. Ching, Joshua V. Nibre, and Michelle N. Pablo
P-graph model for reverse osmosis network for water processing , Allysa Rae P. Aguilar, Jahnea Denise B. Bermejo, Cee Jay Z. Regala, and Ghielen C. Zenarosa
Life cycle assessment of phosphoric acid based geopolymer adsorbents , Antoinette Joy L. Argonza, Niño Matthew D. Magsano, and James Anthony S. Santa Ana
Determining the bioenergy potential of multiple crops (palm oil, soybean and sugarcane) in the Philippines by land suitability analysis , JV Nicole Pausal Bacayo, Lorraine Ysabel Abesamis Laconico, Denise Alyssa Cordero Somera, and Chloe Brianna Valbuena Teng
Development of a prototype model for the planning of hybrid renewable energy polygeneration systems in off-grid communities , Michael Renz Gueco Buan, Melanie Joy Viray Hauschild, and Amanda Louise Salay Nunag
Comparison of subcritical fluid extraction and microwave-assisted extraction of phenolic compounds from Chlorella sorokiniana , Frechette Anne P. Burog, Krishel Eunice O. Ngo, and Kiara Denesse A. Rentuza
Land suitability evaluation of Philippine sunflower (Helianthus annuus L.) for potential conversion to biodiesel , Aaron John V. Cerame, Alexis C. Lopez, Frando Romel C. Sol, and Maria Danielle B. Yamsuan
Evaluation of the physico-chemical properties and antioxidant activity of lambanog , Eraica Pearl Oraa Chan, Kyana Renae Chan Cua, Danica Allyana Dy Ng, and Karolyn Clea Alpas Villaroman
Acid mine drainage treatment using a process train with low grade ore, concrete waste, and limestone as treatment media , Kristina Shi Cordero, Gillian Sue Lim Tan, and Aileen Lo Santos
Effect of sonication power on the degree of cell removal and scaffold integrity of decellularized porcine kidney cortex using a bath-type sonicator , John Ray C. Estrellado and Maria Gabrielle Y. Galang
Bayesian classifier for identifying secure CO2 reservoirs , Aloysius Gerard M. Lubi, Christian Michael A. Moneda, Diane D. Quitain, and Scientifica N. Lim
P-graph approach in value chain modeling of rice husk-fired biomass processes , Michael Reiji A. Maleniza
Profiling of the antibacterial activity of a hypothetical surface containing Ag and Cu nanoparticles using the finite difference method , Alyza Claire A. Morales, Marie Danielle S. Necio, and Sofia Isabelle D. Pabale
Water usage optimization in a fish processing industry through resource conservation networks with material interception schemes using p-graph approach , Marc Joshua Abad, Clyde Austin Dy Chua, and Andrew Felix Ching Go
A binary hyperbox classifier model for hydrogen storage in magnesium (Mg) and complex hydrides , John Andrei S. Acantilado, K Anthea C. Rana, and Jared Ethan M. Santos
Optimization of a bench-scale magnetic induction thermal reactor for carbon nanotube (CNT) production over metal catalysts , Jonel E. Almario, Gregory Grant U. Faelden, Adrian Paul A. Payumo, and Fernando Jose M. Yupangco
Fuzzy optimization of the esterification conditions in biodiesel production using karanja oil as feedstock , Cassandra Q. Buenviaje, Darwin Tyson H. Cua, Maria Patricia Isabel P. Pascual, and Caitlyn Danielle O. See
Fuzzy optimization of Fenton's reagent and cationic surfactant for sludge dewatering , Micah Angela Dumo Cabral, Clea Pauline Armengol De Vera, Maria Isabel Masbang Luna, and Cheska Flores Raymund
Flexible mechanisms in carbon capture and storage , Lea Myka S. Española, Lhyra Zophiya A. Fernandez, Grace Emmanuelle T. Lontok, and Leslie Genevieve C. Ong
Carbon footprint of terrestrial and coastal enhanced weathering systems for carbon sequestration , Lucian Trinidad Hao, Patricia Antoinette Andres Santos, and Claudette Bernice Ng Shi
Performance evaluation of pilot-scale A2O reactor as a biological nutrient removal from municipal wastewater , Patricia C. Lee and Aiah Kristine A. Reyes
Predicting the effluent total coliform count of UV disinfection for wastewater treatment using artificial neural networks , Marc Kenzo Wong Liu, Michael Chin Lumampao Lu, Jennings Jervis Te Mew Ngo, and Jaena Mae Ong Que
Advanced Search
Home | About | FAQ | My Account | Accessibility Statement
Privacy Copyright
Using innovative engineering models and approaches, Lenox is an important voice in his field and a much-sought-after consultant by some of the country’s largest and most complex entities.
Before he ever studied innovation and business – prior to the teaching and mentorship that’s defined his career, and long before organizations from General Motors to NASA started asking for his services – Mike Lenox was an aspiring engineer.
He was 18 and a first-year student at the University of Virginia’s School of Engineering and Applied Sciences, just across Grounds from his future home in the Darden School of Business, where he now serves as University Professor and Tayloe Murphy Professor of Business.
“I chose engineering because I was good at math, and so people suggested I should do engineering,” he recalled recently of those early days on Grounds.
But it wasn’t a mismatch. The insights the field would require – the analytical frameworks it taught him, and the approach to problem-solving that engineering required – set the stage for a deep and varied career in business and higher education, where he has focused on innovation and disruption. And that might not have happened if he wasn’t an engineer first.
“I got attracted to systems engineering because it was the most big picture of all the engineering disciplines,” said Lenox, who has two degrees from UVA’s Engineering School. “As our faculty would say, civil engineers knew how to build bridges, systems engineers knew where to build them.”
After leaving UVA’s Engineering School with his master’s degree, Lenox went on to the Massachusetts Institute of Technology, where he earned a Ph.D. in MIT’s Engineering Systems Division through their Technology Management and Policy Program. Since then, he’s spent much of his career using engineering principles in the study and practice of business, serving as an important voice in his field and as a much-sought consultant by some of the country’s largest and most complex entities.
Recently, Lenox sat down for a few questions about his career, his views on how engineering training can pay off in the corporate and business worlds, and on his advice for students today who are interested in engineering but also want an entrepreneurial career in the private sector.
A: As a young man, I stayed a fifth year at UVA and received my master’s while my now-wife was finishing up with school. I did my thesis on extreme-but-rare events, such as a disaster at a chemical plant, that are unlikely to happen but can have big impact if they do.
What intrigued me about the work was that the risk factors were as much about management and economics as they were about technical issues within a chemical plant. And that really got me interested in thinking about the social systems side of it all.
I took a job in consulting, then decided to apply for a doctorate in management and policy at MIT. They wanted to take technically oriented students and prepare them to do work in public policy. I was interested in environmental policy, and environmental systems in general. As I pursued my studies, I got very interested in how businesses thought about environmental issues, which was really a fringe topic at the time. There was no such term then as “corporate sustainability.”
A: I was fortunate in what I studied. I don’t have an economics degree, but a lot of my training was in economics. It’s the most mathematical of the social sciences, and I was well prepared for that from my time at Engineering. I had all the calculus and stats; I could handle the math. But what was interesting was that my systems perspective created a certain amount of skepticism of traditional economic models.
Engineers adopt modeling approaches that you don’t always see in the social sciences. I joke that I’m on the heretical fringes of economics. The questions that most interest me are around technology, innovation, and market disruption, topics that don’t fit well in the equilibrium analyses common in much of economics. For example, during my doctoral studies, I spent a summer at the Santa Fe Institute studying complex systems and computational methods.
Bill Scherer [current chair of the Department of Systems and Information at the Engineering School] was one of my professors, even though he was only 25 at the time. We learned things like complexity modeling, and I got a chance to start using complexity models to understand how markets work. And again, it’s not mainstream; this technique for assessing markets is very much on the heretical fringes. But it’s incredibly important for us to be able to understand innovation and the dynamism of markets and technology. My systems training was just invaluable. It changed my perspective.
For example, I have an appointment at the Miller Center as a senior fellow on a project on democracy and capitalism. We are very interdisciplinary. We have all these scholars asking the really big questions about the future of democracy and capitalism. My systems training makes me think of these things as one integrated system, instead of a bunch of separate closed systems. You can’t separate the economic from the political from the social.
A: What I would say is: I’m an engineer at heart. I like to solve problems. And I think when it comes to entrepreneurs, that’s ultimately what they do. There’s been a lot of research about this. Entrepreneurs don’t look at the world and think how to make the most money. My guess is that Bill Gates probably said, “I want to create the world’s greatest software company,” or maybe “I want to make the best software.” And that solution mindset, that problem-fixing mindset, that’s part and parcel of what we do as engineers and what an entrepreneur does as well.
A: There have been various great efforts to support entrepreneurship and innovation over the years at UVA, including within the Engineering School. However, I would argue that the whole has not been greater than the sum of our efforts. What we’re trying to do is to build a platform to support and catalyze offerings, including standing up some new efforts that support the entire university.
We’re trying to create those conditions where magic occurs. Especially having networks where people can support one another and building teams that really complement one another in terms of what they bring to the table. For example, we are launching a new student-focused center on the Corner, called the Foundry. It’s going to be a great resource for students of all academic backgrounds.
“I’m grateful to the many people around Grounds who have built a thriving culture of entrepreneurship at UVA, and to Mike Lenox for his leadership of this new initiative,” UVA President Jim Ryan said. “I am excited to see entrepreneurs from across the University come together, and to see the ripple effects that come from bringing more great ideas to life.”
IMAGES
COMMENTS
Undergraduate Chemical Dissertation Topics. Topic 1: Organic redox and electrolyte development for semi-organic dry cell and flow battery production development. Topic 2: Chemical Engineering and Petroleum Engineering. Topic 3: Influence of Chemicals on Environment.
Engineering Hybrid Colloidal Systems Formed by Charge-Driven Assembly Between Spherical Soft Nanoparticles and Discotic Nanoplatelets, Gelareh Rezvan. PDF. Heterogeneous Catalyst Design For Biomass Conversion, Dia Sahsah. PDF. First Principles Doping Analysis of Perovskite- And Ruddlesden-Popper-Based Solid Oxide Fuel Cells, Nicholas Alexander ...
Chemical engineering is all about finding new, exciting ways to make our world better. Whether you're a scientist or just love learning, this article is your guide to 100 amazing research ideas. We'll talk about making things cleaner, using tiny particles to do big things, and finding ways to use less and save more.
Getting a First-Class degree is difficult in most subjects, however, this is especially so in scientific and engineering-based courses. From my experience especially with a Master's degree, the dissertation plays a huge part in your overall classification.. For example on a credits basis a typical module in the UK is around 20 credits, so out of a total 180 credits to pass the year then each ...
Chemical Engineering Theses and Dissertations . Follow. Theses/Dissertations from 2023 PDF. Predicting Ash Deposition In A Cyclone-Fired Coal Boiler Under Variable Load Conditions, Evan Bloom. PDF. A WRF-Chem Air Pollution Modeling Study Over The Northern Plains, Carlos Javier Bucaram. PDF.
Theses/Dissertations from 2024. PDF. Development of Zr (IV) MOF-Enabled Nerve Agent Electrochemical Hydrolysis Sensors, Tyler James Marlar. PDF. Manipulating Colloidal Particles Using Chemical Gradients and Top-Down Control, Mark Nichols McDonald. PDF. Mineral Matter Behavior During the Combustion of Biomass and Coal Blends and its Effect on ...
2020 Dissertation Titles. Molecular- and Continuum-Scale Simulation of Single- and Two-Phase Flow of CO2 and H2O in Mixed-Layer Clays and a Heterogeneous Sandstone, P.I: Muhammad Sahimi, Professor. Fabrication and Analysis of Prepregs with Discontinuous Resin Patterning for Robust Out-of-Autoclave Manufacturing, P.I: Steven Nutt, Professor.
Developing Process Control Experiments for Undergraduate Chemical Engineering Laboratories, Chase M. Swaffar. PDF. Tin Sensitization For Electroless Plating, Xingfei Wei. Theses/Dissertations from 2012 PDF. Refractive Index Chemical Sensing with Noble Metal Nanoparticles, Phillip Blake. PDF
Before you begin your actual writing process, it is a good idea to have (a) a perspective of the background and significance of your research, (b) a set of aims that you want to explore, and (c) a plan to approach your aims. However, the formation of your thesis proposal is often a nonlinear process. Going back and forth to revise your ideas ...
Biomass Derived Lignin Polymer Modification for Sustainable Chemical Engineering Applications, Samantha Glidewell and Keisha Walters. PDF. Modeling Sex-Specific Changes in Myocardial Fibrosis, Grace Martin. PDF. Integrating Galectin-3 Into a Computational Model of Cardiac Fibrosis Progression, Adam Pieratt. Theses from 2023 PDF
MIT's DSpace contains more than 58,000 theses completed at MIT dating as far back as the mid 1800's. Theses in this collection have been scanned by the MIT Libraries or submitted in electronic format by thesis authors. Since 2004 all new Masters and Ph.D. theses are scanned and added to this collection after degrees are awarded.
The Institution of Engineers (India) Dear Adel Afzalian, Followings are master thesis topics in chemical Engineering. 1. Simulation of Urea plant w.r.t to material & Energy Balance. 2. Simulation ...
Access a collection of theses from the University of Massachusetts Amherst's Department of Chemical Engineering.
A dissertation or thesis is a document submitted in support of candidature for a degree or professional qualification presenting the author's research and findings. (International Standard ISO 7144: Documentation — Presentation of theses and similar documents ). For most universities in the U.S., dissertation is the term for the required ...
Bolt, Cameron E. (University of Pretoria, 2023-12-12) This dissertation presents the development and implementation of a model predictive control (MPC) system for a coffee roasting process, to optimise roasting quality while minimising energy consumption. The study involved ...
A proof-of-concept project to develop a niobium Chemical Mechanical Polishing (CMP) process used XPS to monitor surface composition and structure under varying CMP parameters. XPS confirmed rapid oxidation of the niobium with a self-limiting surface oxide of 5.0±0.8 nm. CMP surface effects were explored and a smooth (24 nm average roughness ...
Digital collection. Undergraduate Honors Theses - Chemical Engineering. Online 3. Synthesis and Characterization of Open-Metal Site Grafting to Metal- Organic Frameworks for Solid Electrolyte Applications [2017 - 2019] Select. Taussig, Abigail (Author) September 2017 - April 2019. Description.
Theses/Dissertations/Reports from 2024 PDF. Anaerobic Reductive Bioleaching of Manganese Ores, Neha Sharma. Theses/Dissertations/Reports from 2023 PDF. Chemical Decomposition of Flexible Polyurethane Foam to Generate a Media for Microbial Upcycling, Kaushik Baruah. PDF
Chemical Engineering Undergraduate Thesis Archive. This page lists all undergraduate theses produced by the Department of Chemical Engineering (DChE) 2023-2024. Identifier: Title: Adviser: 2021-2022. Identifier: Title: Adviser: 2020-2021. Identifier:
For chemical engineering-related resources, a good starting point has been set-up by the library. The Kirk Othmer Encyclopedia of Chemical Technology is an excellent place to start for many topics, and is a massive resource dedicated to chemical engineering topics. Topics.
Syntheses and Electrospinning of Poly(Amino Acid Ester) Phosphazene Biomaterials for Tissue Engineering Applications, Meng Wang. PDF. Hydrodeoxygenation (HDO) upgrading of pyrolysis bio-oils: developing novel carbon-supported catalysts and addressing process corrosion challenges, Mingyuan Zhang. Theses/Dissertations from 2023 PDF
Sustainable Construction Materials: Process, Structure, and Properties. A multidisciplinary journal that explores the opportunities for chemical engineering to address some of the key challenges we face - energy, health, food, manufacturing and the environment.
Theses/Dissertations from 2022. PDF. P-graph model for reverse osmosis network for water processing, Allysa Rae P. Aguilar, Jahnea Denise B. Bermejo, Cee Jay Z. Regala, and Ghielen C. Zenarosa. PDF. Life cycle assessment of phosphoric acid based geopolymer adsorbents, Antoinette Joy L. Argonza, Niño Matthew D. Magsano, and James Anthony S ...
Chemical Engineering. Civil and Environmental Engineering. Computer Engineering. ... I did my thesis on extreme-but-rare events, such as a disaster at a chemical plant, that are unlikely to happen but can have big impact if they do. ... and to see the ripple effects that come from bringing more great ideas to life." ...