Panic: assignment to entry in nil map
When doing docker login in the command prompt / powershell, I the error posted below. Though when doing this, docker desktop gets logged in just fine.
login Authenticating with existing credentials… panic: assignment to entry in nil map
goroutine 1 [running]: github.com/docker/cli/cli/config/credentials.(*fileStore).Store (0xc0004d32c0, {{0x0, 0x0}, {0x0, 0x0}, {0x0, 0x0}, {0x0, 0x0}, {0x149b9b7, …}, …})
Although powershell is available for Linux and macOS as well, I assume you installed Docker Desktop on Windows, right?
I thing so because I have the same problem and I certainly installed on Windows… Do you have a solution? QVQ
I believe I’m experiencing the same issue - new laptop, new docker desktop for windows install. can’t login via command line:
goroutine 1 [running]: github.com/docker/cli/cli/config/credentials.(*fileStore).Store (0xc0004d4600, {{0x0, 0x0}, {0x0, 0x0}, {0x0, 0x0}, {0x0, 0x0}, {0xc00003c420, …}, …}) /go/src/github.com/docker/cli/cli/config/credentials/file_store.go:55 +0x49
I’m experiencing the same issue with my new windows laptop with fresh installation of docker.
Sorry, shortly after posting, I came to think about this very important info. You are of course absolutely correct. This is on a freshly installed Windows 11, latest docker-desktop.
I could try, if wanted. To do a fresh install on a Linux box and see if I experience the same issue there?
I have the same issue, works for me when I use WT and ubuntu, but not from cmd, git bash or powershell
If it is not a problem for you, that coud help to find out if it is only a Windows issue, but since so many of you had the same issue on the same day, it is very likely to be a bug. Can you share this issue on GitHub?
I tried it on my Windows even though I don’t use Docker Desktop on Windows only when I try to help someone, and it worked for me but it doesn’t mean that it’s not a bug.
If you report the bug on GitHub and share the link here, everyone can join the conversation there too.
In the meantime everyone could try to rename the .docker folder in the \Users\USERNAME folder and try the docke rlogin command again. If the error was something in that folder, that can fix it, but even if it is the case, it shouldn’t have happened.
you cloud try to run docker logout and then docker login ,it works for me .
That’s a good idea too.
I can verify that this did help on my PC too. I have created en issue here:
Hi all, a fix for this will be tracked on the docker/cli issue tracker: Nil pointer dereference on loading the config file · Issue #4414 · docker/cli · GitHub
I was using “az acr login” to do an azure registry docker login and getting this error, but I followed your advice and did a “docker logout” and that cleaned up my issue.
worked for my on my box (latest docker - Docker version 24.0.2, build cb74dfc) on W11. thx for solution.
its work for me. Recommend!
This solution works for me
“docker logout” works for me. Thank you!
Logout worked here too!
Docker Community Forums
Share and learn in the Docker community.
- Primary Action
- Another Action
Example error:
This panic occurs when you fail to initialize a map properly.
Initial Steps Overview
- Check the declaration of the map
Detailed Steps
1) check the declaration of the map.
If necessary, use the error information to locate the map causing the issue, then find where this map is first declared, which may be as below:
The block of code above specifies the kind of map we want ( string: int ), but doesn’t actually create a map for us to use. This will cause a panic when we try to assign values to the map. Instead you should use the make keyword as outlined in Solution A . If you are trying to create a series of nested maps (a map similar to a JSON structure, for example), see Solution B .
Solutions List
A) use ‘make’ to initialize the map.
B) Nested maps
Solutions Detail
Instead, we can use make to initialize a map of the specified type. We’re then free to set and retrieve key:value pairs in the map as usual.
B) Nested Maps
If you are trying to use a map within another map, for example when building JSON-like data, things can become more complicated, but the same principles remain in that make is required to initialize a map.
For a more convenient way to work with this kind of nested structure see Further Step 1 . It may also be worth considering using Go structs or the Go JSON package .
Further Steps
- Use composite literals to create map in-line
1) Use composite literals to create map in-line
Using a composite literal we can skip having to use the make keyword and reduce the required number of lines of code.
Further Information
https://yourbasic.org/golang/gotcha-assignment-entry-nil-map/ https://stackoverflow.com/questions/35379378/go-assignment-to-entry-in-nil-map https://stackoverflow.com/questions/27267900/runtime-error-assignment-to-entry-in-nil-map
HatchJS.com
Cracking the Shell of Mystery
Panic: Assignment to Entry in Nil Map
Maps are a powerful tool in Golang, but they can also be a source of confusion and frustration. One common error that Golang programmers make is trying to assign a value to an entry in a nil map. This will cause a panic, which is a fatal error that terminates the program.
In this article, we’ll take a look at what a nil map is, why it’s dangerous to assign values to them, and how to avoid this error. We’ll also provide some tips on how to debug panics caused by nil maps.
What is a Nil Map?
A nil map is a map that has not been initialized. This means that it has no entries, and it cannot be used to store or retrieve data.
When you try to access an entry in a nil map, you will get a panic. This is because the compiler cannot guarantee that the map will ever contain any entries, so it cannot safely perform the operation.
Why is it Dangerous to Assign Values to Nil Maps?
Assigning values to nil maps is dangerous because it can lead to unexpected behavior and errors. For example, if you try to assign a value to a nil map, the compiler will not check to see if the map exists. This means that you could accidentally overwrite a valid map with a nil map, which could corrupt your data.
How to Avoid This Error
There are a few ways to avoid the error of assigning values to nil maps.
- Always check to see if a map is nil before you try to access or modify it. You can do this using the `len()` function. If the length of the map is 0, then it is nil.
- Use the `make()` function to create a new map. This will ensure that the map is initialized and that you can safely assign values to it.
- Use the `delete()` function to remove entries from a map. This will prevent you from accidentally overwriting a valid map with a nil map.
Tips for Debugging Panics Caused by Nil Maps
If you get a panic caused by a nil map, here are a few tips for debugging the problem:
- Check the stack trace. The stack trace will show you the line of code where the panic occurred. This can help you identify the source of the error.
- Use the `print()` function to print the values of your maps. This can help you see if there are any nil maps in your code.
- Use the `debug` package to set breakpoints and inspect your code. This can help you track down the problem and fix it.
Nil maps can be a source of confusion and frustration, but they can also be avoided by following a few simple guidelines. By checking for nil maps before you access or modify them, using the `make()` function to create new maps, and using the `delete()` function to remove entries from maps, you can prevent yourself from getting the panic: assignment to entry in nil map error.
Column 1 | Column 2 | Column 3 |
---|---|---|
Panic: assignment to entry in nil map | This error occurs when you try to assign a value to a key in a map that does not exist. | To fix this error, you can either create the key in the map before assigning the value, or you can use the `get()` method to check if the key exists before assigning the value. |
What is a panic?
A panic is a sudden, unexpected crash of a computer program. It can be caused by a variety of errors, such as a divide-by-zero error, an invalid memory access, or a runtime error. When a panic occurs, the program terminates immediately and the operating system displays an error message.
Panics are usually caused by programming errors. However, they can also be caused by hardware problems, such as a faulty memory chip. If you are experiencing frequent panics, it is a good idea to check your hardware for problems.
What is a nil map?
A nil map is a map that has no entries. In other words, it is a map with a size of zero. Nil maps are often used as default values for maps that are not yet initialized.
You can create a nil map using the following code:
map := make(map[string]int)
You can also check if a map is nil using the following code:
if map == nil { // The map is nil. }
Nil maps are not the same as empty maps. An empty map is a map that has been initialized, but does not have any entries. You can create an empty map using the following code:
map := map[string]int{}
You can check if a map is empty using the following code:
if len(map) == 0 { // The map is empty. }
Panics are a common problem in computer programming. They can be caused by a variety of errors, such as programming errors, hardware problems, or operating system problems. Nil maps are a special type of map that has no entries. They are often used as default values for maps that are not yet initialized.
What causes the panic `assignment to entry in nil map`?
The panic `assignment to entry in nil map` occurs when you try to assign a value to a key in a map that does not exist. This can happen when you are using a map literal to initialize a variable, or when you are using the `map.insert()` method to add a new key-value pair to a map.
For example, the following code will cause a panic:
var m map[string]int m[“foo”] = 10
This is because the map `m` is nil, which means that it does not have any key-value pairs. When you try to assign a value to the key `”foo”`, the compiler will panic because there is no entry in the map to assign the value to.
You can avoid this panic by checking to see if the map exists before you try to assign a value to it. You can do this using the `len()` function, which returns the number of key-value pairs in a map. If the map is empty, you can use the `map.default()` method to set a default value for the key.
For example, the following code will not cause a panic:
var m map[string]int if len(m) == 0 { m = make(map[string]int) } m[“foo”] = 10
How to avoid the panic `assignment to entry in nil map`?
There are a few ways to avoid the panic `assignment to entry in nil map`.
- Check to see if the map exists before you try to assign a value to it. You can do this using the `len()` function, which returns the number of key-value pairs in a map. If the map is empty, you can use the `map.default()` method to set a default value for the key.
- Use the `make()` function to create a new map. This will ensure that the map is not nil, and you will not get a panic when you try to assign a value to it.
- Use the `map.delete()` method to remove a key from the map before you try to assign a value to it. This will ensure that the key does not exist in the map, and you will not get a panic when you try to assign a value to it.
Here are some examples of how to avoid the panic `assignment to entry in nil map`:
// Check to see if the map exists before you try to assign a value to it. var m map[string]int if len(m) == 0 { m = make(map[string]int) } m[“foo”] = 10
// Use the `make()` function to create a new map. m := make(map[string]int) m[“foo”] = 10
// Use the `map.delete()` method to remove a key from the map before you try to assign a value to it. m := make(map[string]int) m[“foo”] = 10 delete(m, “foo”) m[“foo”] = 20
By following these tips, you can avoid the panic `assignment to entry in nil map` and ensure that your code is more reliable.
Q: What does the error “panic: assignment to entry in nil map” mean?
A: This error occurs when you try to access or modify a value in a map that does not exist. This can happen if you accidentally mistype the key, or if the map has been cleared.
Q: How can I fix the error “panic: assignment to entry in nil map”?
A: There are a few ways to fix this error.
- Make sure the key you are using exists. If you are not sure whether the key exists, you can use the `len()` function to check the length of the map. If the length is 0, then the key does not exist.
- Clear the map before trying to access it. If you know that the key exists, but the map has been cleared, you can clear the map before trying to access it. You can do this by calling the `clear()` method on the map.
- Use the `default()` method to get a default value for the key. If you do not want to check whether the key exists, you can use the `default()` method to get a default value for the key. The `default()` method takes a function as an argument. The function will be called if the key does not exist. The function should return the default value for the key.
Q: What are some common causes of the error “panic: assignment to entry in nil map”?
A: There are a few common causes of this error.
- Mistyping the key. This is the most common cause of the error. Make sure you are typing the key correctly.
- Clearing the map. If you clear the map, all of the keys and values will be removed. This means that any attempts to access or modify a value in the map will result in an error.
- Using the wrong type of key. The keys in a map must be of a type that can be used as an index. This means that they must be a string, a number, or a pointer to a struct. If you try to use a key of a different type, you will get an error.
Q: What can I do to prevent the error “panic: assignment to entry in nil map”?
A: There are a few things you can do to prevent this error.
- Be careful when typing keys. Make sure you are typing the keys correctly.
- Clear the map before trying to access it. If you know that the map has been cleared, clear it before trying to access it.
- Use the `default()` method to get a default value for the key. If you do not want to check whether the key exists, you can use the `default()` method to get a default value for the key.
Q: What are the security implications of the error “panic: assignment to entry in nil map”?
A: This error can have security implications if it is not handled properly. If an attacker can exploit this error, they could gain access to sensitive data or even execute arbitrary code. It is important to make sure that this error is handled properly in order to protect your application from security breaches.
In this blog post, we discussed the error panic: assignment to entry in nil map. We explained what this error means and how it can be avoided. We also provided some tips for debugging this error.
We hope that this blog post has been helpful. If you have any other questions about this error, please feel free to contact us.
Here are some key takeaways from this blog post:
- The panic: assignment to entry in nil map error occurs when you try to access a key in a map that does not exist.
- This error can be avoided by checking to make sure that the map exists before you try to access it.
- You can debug this error by using the following steps:
- Check to make sure that the map exists.
- Check to make sure that the key you are trying to access exists.
- Check to make sure that you are using the correct syntax to access the map.
Author Profile
Latest entries
- December 26, 2023 Error Fixing User: Anonymous is not authorized to perform: execute-api:invoke on resource: How to fix this error
- December 26, 2023 How To Guides Valid Intents Must Be Provided for the Client: Why It’s Important and How to Do It
- December 26, 2023 Error Fixing How to Fix the The Root Filesystem Requires a Manual fsck Error
- December 26, 2023 Troubleshooting How to Fix the `sed unterminated s` Command
Similar Posts
C2d array length: a comprehensive guide.
**C2D Array Length: An In-Depth Guide** **Arrays** are one of the most fundamental data structures in C. They allow you to store multiple values of the same type in a single variable. While one-dimensional arrays (arrays with a single index) are common, you may also need to work with two-dimensional arrays (arrays with two indices)….
Powershell: Check if Registry Key Exists
PowerShell: Checking if a Registry Key Exists The Windows Registry is a hierarchical database that stores configuration settings for the operating system and installed applications. It’s a powerful tool that can be used to manage a wide range of system settings, but it can also be a bit daunting to work with. One of the…
Microsoft Azure Services App Authentication: A Guide for Developers
Microsoft Azure Services App Authentication: A Guide for Developers In today’s digital world, businesses are increasingly turning to cloud-based applications to improve their efficiency and productivity. However, with the growing number of cloud-based applications, it can be difficult for developers to keep track of which applications their users have access to and how they are…
Python Interpreter Process Exited with a Non-Zero Exit Code 126: Causes and Solutions
Have you ever encountered the dreaded “Python interpreter process exited with a non-zero exit code 126” error? If so, you’re not alone. This error is a common one, and it can be caused by a variety of factors. In this article, we’ll take a look at what this error means, what causes it, and how…
Ruby on Rails before_action: A Complete Guide
Ruby on Rails before_action: A Guide for Beginners In Ruby on Rails, before_action is a method that is called before every action in a controller. This can be used to perform common tasks, such as setting up variables or checking for authorization. Before_action is a powerful tool that can help you to keep your code…
Should I Connect My Headphones to My PC or Monitor?
Should I Connect My Headphones to My PC or Monitor? When it comes to gaming, listening to music, or watching movies, the quality of your audio experience can make a big difference. If you’re not sure whether to connect your headphones to your PC or monitor, there are a few factors you’ll need to consider….
Assignment to entry in nil map
Why does this program panic?
You have to initialize the map using the make function (or a map literal) before you can add any elements:
See Maps explained for more about maps.
Panic: assignment to entry in nil map for complex struct
Complete Code : https://play.golang.org/p/bctvsy7ARqS
package main
import ( “fmt” )
type Plan struct { BufferMeasures map[string]*ItemSiteMeasure } type ItemSiteMeasure struct { itemtest string }
func main() {
func (p *Plan) AddBuffer() { fmt.Println(“method start”) p.BufferMeasures[“itmsit1”] = &ItemSiteMeasure{itemtest: “item1”} fmt.Println("obj values : ", p.BufferMeasures) fmt.Println(“method end”) }
Error /output:
start method start panic: assignment to entry in nil map
goroutine 1 [running]: main.(*Plan).AddBuffer(0xc000068f50) /tmp/sandbox633108119/prog.go:29 +0xe8 main.main() /tmp/sandbox633108119/prog.go:20 +0x90
To initialize a map, use the built in make function The Go Blog: Go maps in action
. start method start obj values : map[itmsit1:0xc000010230] method end end
Thanks Petrus, issue resolved.
This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.
|
IMAGES
VIDEO
COMMENTS
Panic: assignment to entry in nil map. ### Description When doing docker login in the command prompt / powershell, I g …. Hi all, a fix for this will be tracked on the docker/cli issue tracker: Nil pointer dereference on loading the config file · Issue #4414 · docker/cli · GitHub. Thank you!
Panic: assignment to entry in nil map #13606 Closed jegjessing opened this issue on Jul 17, 2023 · 4 comments
Map types are reference types, like pointers or slices, and so the value of m above is nil; it doesn't point to an initialized map. A nil map behaves like an empty map when reading, but attempts to write to a nil map will cause a runtime panic; don't do that.
Description Modify auth.json fields leads to panic: assignment to entry in nil map Steps to reproduce the issue: success login image registry change auth.json fileds $ cat auth.json { "auths": { "m...
panic: assignment to entry in nil map where using BUILDX_GIT_LABELS=full with bake #1342 Closed dgageot opened this issue on Oct 3, 2022 · 0 comments · Fixed by #1343 Member
The block of code above specifies the kind of map we want (string: int), but doesn't actually create a map for us to use. This will cause a panic when we try to assign values to the map. Instead you should use the make keyword as outlined in Solution A. If you are trying to create a series of nested maps (a map similar to a JSON structure, for example), see Solution B. panic: assignment to ...
The above code is being called from main. droid [matchId] [droidId] = Match {1, 100} <- this is line trown the Panic: assignment to entry in nil map. Hey @frayela, you need to replace that line with the following for it to work: droid [matchId] = map [string]Match {droidId: Match {1, 100}} This is saying, initialize the map [string] of a map ...
The panic `assignment to entry in nil map` occurs when you try to assign a value to a key in a map that does not exist. This can happen when you are using a map literal to initialize a variable, or when you are using the `map.insert ()` method to add a new key-value pair to a map.
10 When trying to set value to the map (countedData) in the below code, I am getting an error that says, assignment to entry in nil map.
You have to initialize the map using the make function (or a map literal) before you can add any elements: m := make(map[string]float64) m["pi"] = 3.1416. See Maps explained for more about maps. Index.
if p.BufferMeasures == nil { p.BufferMeasures = make (map [string]*ItemSiteMeasure) } Thanks Petrus, issue resolved.
If you see the log of rancher-server, you should be able to see rancher-server container restarted because of following panic panic: assignment to entry in nil map
A nil map behaves like an empty map when reading, but attempts to write to a nil map will cause a runtime panic; don't do that. To initialize a map, use the built in make function:
16 I'm trying to create a slice of Maps. Although the code compiles fine, I get the runtime error below: mapassign1: runtime·panicstring("assignment to entry in nil ...
Bug 1886600 - panic: assignment to entry in nil map Summary: panic: assignment to entry in nil map Keywords : Status : CLOSED ERRATA Alias: None Product: OpenShift Container Platform Classification: Red Hat Component: Cluster Version Operator Sub Component: --- Version: 4.5 Hardware: Unspecified OS: Unspecified Priority: high Severity: high ...
Syncthing was down on a computer that I help administer remotely, and upon checking it I've found these panic logs. Unfortunately, I don't what could've happened exactly. The system itself was still working when I logged into it, and it hadn't run out of disk space or memory or anything like that beforehand. This is Windows 10 x64 and the Syncthing version was v1.20.2 (custom built ...
I am new to golang and I am trying to create a map of type map [string]interface {}.
Describe the bug Rancher Container is randomly crashing with: Observed a panic: "assignment to entry in nil map" (assignment to entry in nil map)
above is i think the minimum you need to change to get your example working. but rather than constructing the map per id and then filling in the keys, just create a map literal and assign it to the id value, something like: var id int. Contests := make(map[string]map[string]map[string]map[string]string)
your m variable is assigned with a default value of map, which is nil, not an empty map. This is why you get that error, you are trying to add a value to a nil map.
Which version are you using? v0.17.17 Which operating system are you using? Linux amd64 standard [x ] Linux amd64 Docker Linux arm64 standard Linux arm64 Docker Linux arm7 standard Linux arm7 Docke...